표제지
Abstract
목차
제I장 서론 11
제II장 이론적 배경 및 문헌조사 13
1. 치과용 CAD/CAM의 발전 13
2. 치과용 지르코니아의 성질 15
3. 알루미나의 결정구조와 성질 17
4. Ball Milling 19
5. Slip casting 22
제III장 실험 방법 24
1. 출발원료 24
2. 제조 공정 25
1) 시편 성형 26
2) 시편 소성 27
3. 시험 항목 28
1) 지르코니아 소성체의 평가 28
2) 꺾임 강도 29
3) SEM 관찰 29
4) XRD 관찰 29
제IV장 결과 및 고찰 30
1. Ball milling한 분체의 SEM 관찰 30
2. 예비실험 31
1) 지르코니아의 물성비교 31
2) 지르코니아의 SEM 관찰 32
3) 예비실험 결과의 평가 33
2. 알루미나 첨가에 따른 물성 변화 34
3. 알루미나 첨가에 따른 SEM 관찰 35
4. EDS 분석 36
5. XRD 분석 37
제V장 결론 38
제VI장 참고문헌 39
Table 1. Selected physical properties of base materials. 24
Fig. 1. Transformation of zirconia. 15
Fig. 2. Packing of Al and O ions in the basal plane. The upper layer of O ion is not shown. Basal hexagonal cell vectors and directions are indicated. 18
Fig. 3. Size reduction model 21
Fig. 4. Drain casting illustration. 23
Fig. 5. Flow chart of the experimental procedures. 25
Fig. 6. Slip casting 26
Fig. 7. SEM photographs of zirconia particles after ball milling. 30
Fig. 8. Comparison of firing shrinkage, specific gravity and bending strength of as received and casted waste zirconia specimens fired at 1500℃ for 1h. 31
Fig. 9. Comparison of SEM photo micrographs of as received and casted waste zirconia specimens fired at 1500℃ for 1h 32
Fig. 10. Firing shrinkage, specific gravity and bending strength of alumina added zirconia specimens fired at 1500℃ for 1h. 34
Fig. 11. SEM photo micrographs of alumina added zirconia specimens fired at 1500℃ for 1h. 35
Fig. 12. EDS analysis results of zirconia and alumina grain. 36
Fig. 13. X-ray diffraction patterns of as received, casted waste zirconia and 3wt% alumina added zirconia specimens fired at 1500℃ for 1h 37