the die, which is, the dimensional changes from the die through forged part to final part after heat treatment were considered. The experimental and FEM analysis are performed to investigate the dimensional changes from the die to final part on cold forged part, comparing with the machined gear. The dimension of forged part is compared with the die dimension at each stage, such as, machined die, cold forged part, and heat-treated-part. The elastic characteristics and thermal influences on forging stage are analyzed numerically by the DEFORM-3DTM. The analyzed residual stress of forged part is considered into the FE-analysis for heat treatment using the DEFORM-HTTM. The effects of residual stress affected into the dimensional changes could be investigated by the FEA. Each residual stress of gears was measured practicaly by laser beam type measurement.