추가적인 챔버를 필요로 하지 않는 로 내 탈황 기술은 순산소 연소 기술에 적용 가능할 것으로 기대되어 많은 연구가 진행중이다. 이때, 수 나노부터 수십 마이크로미터의 넓은 사이즈 분포를 가지는 CaCO3 입자가 흡착제로써 사용된다. 본 연구에서는 순산소 연소 시스템을 모사하는 랩스케일의 실험 장치를 구축하였다. CaCO3 흡착제 입자는 1200℃로 설정된 고온 반응로에 각각 공기 분위기와 CO2 분위기에서 노출되게 된다. 이때 고온 반응로에서의 체류 시간을 0.33 ~ 1.46 초로 변화시켜 가면서 분석을 수행하였다. 흡착제 입자는 고온 반응로의 전단과 후단에서 각각 포집되어 주사형 이동도 입자계수기, X-선 회절장치, 열중량 분석기, 주사전자현 미경 등을 사용하여 정성적/정량적으로 분석하였다. 결과적으로, 고온 반응로에서의 체류 시간과 분위기 기체성분이 흡착제 입자의 하소 반응률, 반응 메커니즘 등에 영향을 미침을 확인하였다.The in-furnace desulfurization technique is applied to the O2/CO2 combustion system for the carbon capture and storage (CCS) process because this combustion system does not need an additional chamber for the desulfurization. CaCO3 sorbent particles, which have a wide range in size from a few nanometers to several tens of micrometers, are used for this process. In this study, an experimental system which can simulate the O2/CO2 combustion system was developed. CaCO3 sorbent particles were exposed to the high temperature reactor at 1200캜 with various residence times (0.33-1.46 s) in air and CO2 atmospheric conditions, respectively. The sorbent particles were then sampled at the inlet and outlet of the reactor and analyzed qualitatively/quantitatively using SMPS, XRD, TGA, and SEM. The results showed that the residence time and atmospheric condition in a high temperature reactor can affect the characteristics of the CaCO3 sorbent particles used in the in-furnace desulfurization technique, such as the calcination rate and reaction mechanism.