냉각수, 수증기 등과 같은 유틸리티를 사용하는 설비에서는 장치손상지역에 의한 사고 피해크기
(COF)가 0의 값을 나타내고, 이로 인해 위험도가 0으로 나타난다. 따라서 본 연구에서는 위험기반
검사(RBI)에서 장치손상지역에 의한 COF로부터 위험도를 산출하는 방법을 개선하여 재정적 손실에
의한 COF로부터 위험도를 산출하는 RBI 절차를 개발하였다. 그리고 장치손상지역과 재정적 손실에
의한 위험도로부터 검사주기를 동시에 산정하는 RBI 프로그램(KS-RBI Ver 3.1)을 개발하여 석유화학
공정에 적용하였다. 그 결과, 재정적 손실에 의한 COF로부터 산출한 위험도는 장치손상지역에 의한
COF로부터 산출한 위험도 결과와 거의 유사하였다. 그러나 유틸리티를 사용하거나 고가의 설비에
서는 장치손상지역에 의한 경우보다 재정적 손실에 의한 COF로부터 설비의 위험도를 보다 정확하게
산출할 수 있었다.For the case of the facilities using utilities such as cooling water and steam, risk of the
facilities is zero because the consequence of failure (COF) through equipment damage area is zero.
Therefore, to improve the estimation method of the risk by COF through equipment damage area in
the risk-based inspection (RBI), this study developed the procedures of RBI, in which the risk was
estimated by COF through financial loss. And, the RBI program (KS-RBI Ver 3.1) was developed
to establish inspection interval based on the risk of the facilities estimated by COF through equipment
damage area and financial loss, simultaneously, and the developed RBI program was applied to a
petrochemical process. As a result, risks of the facilities estimated by COF through financial loss were
similar to risks by COF through the equipment damage area. But, for the case of the facilities using
utilities or expensive facilities, the estimation method of the risk by COF through financial loss was
more accurate than through equipment damage area.
Key words : risk-based inspection(RBI), risk, financial los