본 논문에서는 공통 결함접지구조를 이용한 초고주파 대역의 새로운 방향성 결합기에 대하여 기술한다. 공통 결함접지구조는 양면기판의 가운데 공통접지면에 구현된다. 공통 결함접지구조 서로 접지면을 맞대고 있는 양면 마이크로스트립 전송선로에 각각 결함접지구조로 작용한다. 그러므로 공통 결함접지구조를 통하여 상하 마이크로스트립 전송선로간 신호의 결합현상이 수직으로 일어난다. 반면에 종래의 방향성 결합기에서는 전송선로간에 신호결합이 같은 평면상에서 이루어진다. 예로써 공통 결함접지구조를 이용하여 1.5GHz에서 15dB의 결합도를 갖는 방향성 결합기가 설계, 측정된다. 제안하는 결합기는 종래의 구조에 비하여 57%의 크기를 가지면서도 성능은 동일하게 유지된다. 방향성 결합기의 측정된 전송 손실과 결합계수는 각각 0.5dB와 15.7dB인데 방향성 결합기로서의 우수한 특성을 보여주고 있으며, 측정결과는 시뮬레이션 결과와도 잘 일치한다.A new directional coupler structure for microwave applications is described using common a defected ground structure (DGS) in this work. The common DGS (CDGS) structure is realized on the common ground plane which is centered of double-sided substrate. So it operates as a DGS for both microstrip lines which exist with a back-to-back structure to each other. The coupling phenomenon happens vertically between top and bottom microstrip lines through the CDGS, while the signal couples to the next coupled line planarly in the conventional directional couplers. As an example, a 15dB directional coupler at 1.5GHz is designed and measured using the CDGS structure. The proposed directional coupler has the reduced size by 57% compared to the conventional design while the performances are preserved. The measured transmission loss and coupling coefficient of the fabricated coupler are 0.5dB and 15.7dB, respectively, which show excellent performances as a directional coupler. The agreement between the simulated and measured S-parameters is very reliable.