본 연구에서는 용접부의 형상을 고려하여 머플러의 피로수명을 예측하는 프로세스를 개발하였다. 피로수명 예측 프로세스 개발을 위해 머플러의 굽힘 피로시험을 진행한 후 M-N선도를 획득하고, 파손이 발생한 용접부의 형상을 모델링 한 후 정적하중해석을 실시하고, 해석결과를 이용하여 응력집중계수를 구하였다. 응력집중계수는 피로노치계수를 구하는데 사용되며, 이를 바탕으로 피로수명을 예측하였다. 시험결과와 예측결과의 비교를 통해서 피로수명 예측의 타당성을 검증하였다.In this study, the geometry of the weld is used to develop the process of fatigue life prediction. For the development of fatigue life prediction process, bending fatigue test of muffler is conducted to obtain M(Moment)-N(Fatigue life) diagram. Modeling the geometry of the weld which is failed is performed to conduct static load analysis and analysis results are used to calculate the stress concentration factor. The stress concentration factor is used to get the fatigue notch factor and this was based on the fatigue life prediction. As a result of the comparison of test values and predicted values, predicted values are verified.