염료감응 태양전지의 이론적 효율은 33%로 Si계 태양전지를 비롯한 기타 태양전지 중에서 가장 높다. 따라서 염료감응 태양전지의 상용화를 위하여 염료감응 태양전지에 대한 연구가 활발히 진행되고 있다. 특히 광전변환효율을 향상시키기 위하여 광전극의 산화물 반도체, 염료 및 전해질에 대하여 연구가 활발히 진행되고 있다. 본 연구에서는 염료감응 태양전지의 광전변환효율의 향상을 위하여 TiO2 산화물반도체 막의 표면형상을 변화시켰으며 그에 따른 전기화학적 특성에 대하여 연구하였다. 표면형상은 미세구조(FE-SEM), 표면거칠기(AFM), 비표면적(BET) 및 흡수스펙트럼(UV-vis)에 의해 분석되었다.TiO2 산화물 반도체 막의 표면형상 처리시간은 UV-O3 처리를 사용하였으며 처리시간은 10, 20 및 30분으로 하였다. UV-O3 처리시간이 20분인 경우가 가장 우수한 특성을 나타내었다. TiO2 산화물 반도체 막의 표면거칠기는 UV-O3 미처리보다 0.11μm 감소한 0.92μm로 나타났으며 비표면적은 UV-O3 미처리보다 80% 증가한 1.31cm2/g으로 나타났다. 염료감응 태양전지의 광전변환효율은 표면형상 처리를 하지 않을 경우와 표면형상 처리를 10, 20 및 30분 처리한 경우 각각 4.9%, 5.3%, 5.6% 및 5.3%로 나타났다. 이러한 결과는 UV-O3 처리로 TiO2 산화물 반도체 막의 표면형상이 변화되어 TiO2 산화물 반도체 막의 염료 흡착량이 증가되었기 때문이라고 판단된다.We use UV(ultraviolet)-O3 treatment to increase the surface area and porosity of TiO2 films in dye-sensitized solar cells (DSSCs). After the UV-O3 treatment, surface area and porosity of the TiO2films were increased, the increased porosity lead to amount of dye loading and solar conversion efficiency was improved. Field emission scanning electron microscopy images clearly showed that the nanocrystalline porosity of films were increased by UV-O3 treatment. The Brunauer, Emmett, and Teller surface area of the TiO2 films were increased from 0.71 cm2/g to 1.31 cm2/g by using UV-O3 treatment for 20 min. Also, UV-O3 treatment of TiO2 films significantly enhanced their solar conversion efficiency. The efficiency of the films without treatment was 4.9%, and was increased to 5.6% by UV-O3 treatment for 20 min. Therefore the process enhanced the solar conversion efficiency of DSSCs, and can be used to develop high sensitivity DSSCs.