본 논문에서는 공통 결함접지구조를 이용한 초고주파 대역의 브랜치 라인 커플러의 소형화 설계에 대하여 제안한다. 공통 결함접지구조는 양면 마이크로스트립 전송선로 구조의 공통접지면에 구현된다. 공통 결함접지구조는 기존의 결함접지구조 구조를 이용한 소형화에 이어 다시 한 번 더 소형화 단계를 가할 수 있어서 종래보다 회로의 크기를 더욱 소형화할 수 있다. 본 연구에서는 널리 사용되는 초고주파 회로 가운데 하나인 브랜치 라인 커플러에 공통 결함접지구조를 인가하여 표준형에 비하여 대폭 소형화된 회로를 제시한다. 한 예로써 공통 결함접지구조를 이용하여 1GHz에서 설계된 브랜치 라인 커플러는 표준형에 비하여 44.7%의 크기를 가진다. 또한 두 출력 측의 측정된 전달 특성(S21, S31)은 각각 -3.09dB, -3.3dB이며, 두 출력 단자 간에 측정된 전력분배비 에러는 0.21dB, 위상차 에러는 2o로서 우수한 결과임이 제시된다.The design of a size-reduced high frequency branch line coupler using common defected ground structure (DGS) is proposed in this paper. Common DGSs are realized on the common ground plane of double-sided microstrip transmission line structures. Common DGSs highly contribute to the size-reduction of microwave circuits because the second try for size-reduction is applied to the result of the first miniaturization step which uses the conventional DGS. In this paper, a branch line coupler which is one of widely used microwave circuits for wireless systems is selected for size-reduction using the common DGSs, The branch line coupler, designed at 1GHz as an example, has the size of 44.7% compared to the standard circuit due to the applied common DGS. In addition, it is shown that the measured transfer characteristics (S21, S31) at two output ports are -3.09dB and -3.3dB, respectively, and the measured magnitude and phase error between two output ports are 0.21dB and 2o, respectively, which are excellent values.