본 논문에서는 공통 결함접지구조(common defected ground structure(DGS))와 다층 기판구조를 이용한 초고주파용 4-way 윌킨슨 전력분배기의 설계에 대하여 제안하고 있다. 다층구조 안에서 마이크로스트립 전송선로와 스트립선로 전송선로가 적층되면서 공통 DGS를 공유하는 구조를 취하게 된다. 적층형 구조이므로 종래의 평면형 4-way 전력분배기에 비하여 크기가 1/3 이하로 축소된 결과가 제시된다. 마이크로스트립 전송선로와 스트립선로 전송선로 사이에 큰 손실없이 마이크로파 신호가 전달되도록 하기 위하여 신호선 비어홀들로 서로를 연결한다. 설계한 4-way 분배기의 프로토타입 회로가 실제 제작되어 측정된다. 측정된 출력분배 특성은 -6.1 ~ -6.57dB로 이상적인 특성과 비슷한 결과임이 제시된다.In this paper, a design of 4-way microwave Wilkinson power dividers using common defected ground structure and multi-layer substrate is proposed. The multi-layer structure consists of two transmission lines, a microstrip and strip line, in which the common DGS patterns are realized on the common ground plane. The size of the proposed 4-way divider is smaller than 1/3 of the conventional planar 4-way due to the multi-layer structure. The signal lines of the microstrip and strip lines are connected via signal via-holes and transmits the microwave signal without a critical loss. A prototype 4-way power divider is fabricated and tested. The measured power division ratio is -6.1 ~ -6.57 dB, which is so similar to the ideal performances.