부착 긴장재를 이용한 프리스트레스를 도입하는 조립식 교각의 구조 성능을 평가하기 위한 준정적 실험을 수행하였다. 프리캐스트 교각의 이음부를 가로질러 축방향으로 연속배치되는 강재로 강봉과 일반철근, 매입강관과 강연선의 조합을 선택하였다. 주요 설계 변수는 강재량, 프리스트레스의 수준, 단면 상세로 하였다. 이음부 벌어짐 이후에 연속 강재가 하중을 모두 부담하여 응력의 증감을 일으키는데 강재비가 높을수록 휨강도가 높게 나타나고 에너지 소산능력도 현저하게 증가하였다. 매입강재를 갖는 프리캐스트 교각은 최대하중 이후의 거동이 안정적으로 나타나 높은 변위연성도를 나타내었고 프리스트레스 증가에 따른 에너지 소산능력의 증가도 나타내었다. 프리스트레스의 수준이 높을수록 초기 변형 회복능력이 양호하게 나타났고 횡철근의 응력증가도 크게 나타났다. 조립식 교각의 최대하중 도달 이후의 강도 저하가 급격하게 발생하지 않도록 긴장재와 일반강재의 조합을 결정하여야 한다.Quasi-static tests were conducted to evaluate structural performance of precast piers prestressed by bonded prestressing steels. Combinations of prestressing bars and normal reinforcing bars, embedded steel tubes and prestressing strands were used as continuous steels crossing the joints of a precast pier. Main design parameters were steel ratio, magnitude of prestress force, and section details. Flexural strength and energy dissipation capacity of precast columns with higher steel ratio showed better performance due to continuous steels after opening of the joints. Precast piers with embedded members showed stable behavior after reaching maximum loads resulting in higher displacement ductility and energy dissipation capacity increased as the introduced prestress increased. Self-centering behavior at early stages and stress increase of confining reinforcements were observed from highly prestressed columns. Combination of prestressing steels and normal reinforcing bars should be used in design to prevent rapid strength degradation after reaching the maximum load.