실트함유량 변화에 따른 낙동강 모래의 반복전단강도 특성을 살펴보고자 낙동강 유역에 분포하는 모래와 실트를 채취하여 실트함유량 0~50%의 범위로 실내에서 재성형된 실트질 모래시료에 대하여 일련의 비배수 반복삼축실험을 실시하였다. 실험결과, 실트함유량 변화에 따른 반복횟수(N) 10에서의 반복전단응력비(CSR)는 모든 상대밀도에서 실트함유량 5%에서 최대였고, 20%에서 최소를 보였다. 반복비(N/NL)에 따른 간극수압비(Δu/p') 관계로 부터 분석된 간극수압의 발달 경향은 실트함유량에 따른 CSR 크기변화와는 무관하였다. 압밀 후 간극비(e)와 skeleton 간극비(es)를 비교해 본 결과, 전반적으로 실트함유량에 따른 CSR의 변화 경향과 일치하여 실트함유량에 따른 CSR은 실트질 모래의 전단거동에 영향을 미치는 모래만의 간극비인 skeleton 간극비(es)에 큰 영향을 받는 것으로 나타났다.A series of undrained cyclic triaxial tests were carried out to investigate the cyclic shear stress strength characteristics of sands with respect to the silt content. Silty sand was collected around the basin of Nak-Dong River and remolded in laboratory with the range of silt content 0~50% in sand located. As results, with the change of silt content cyclic shear stress ratio (CSR) at N=10 showed the maximum value at 5% and the minimum at 20% in all relative density. The development tendency of the pore water pressure analyzed by the relationship cyclic ratio and pore water pressure ratio is unrelated the change of CSR varying silt content. Comparing the results of the void ratio and skeleton void ratio after consolidation, CSR varying silt content was much affected by skeleton void ratio which is known to affect shear behavior of silty sand.