남극 장보고과학기지의 제2차 월동연구대 활동 기간 중 기지에 설치한 임시 지진관측소의 지진 기록을 분석하여 인위 신호의 특성을 파악하였다. 기지가 외부로부터 고립되는 월동 기간에 필요한 물자 보급과 인력 교대를 위하여 쇄빙연구선 아라온호가 기지 인근에 정박한 2015년 3월 8일 하루 동안의 지진 기록을 분석하였다.
아라온의 정박 동안, 기지에서 다양한 인위 신호가 발생하였다. 대표적인 신호 발생원으로 기지 운영과 아라온작동에 필수적인 발전기 등의 기계장치와 인력과 물자 수송을 위한 헬리콥터와 운송 장비 등이 있다. 이들은 엔진이나 모터를 이용하므로 특정한 주파수 대역의 인위 신호를 발생시킨다. 지진 기록으로부터 인위 신호의 특징을 파악하고 알려진 기계장치의 제원을 이용하여 계산할 수 있는 신호의 주파수 대역을 비교하였다. 각 기계장치에 대한 계산 신호는 관측 신호와 정확하게 부합한다. 이로부터 기계장치의 작동 시간과 움직임 및 경로에대한 정보를 파악할 수 있다. 이러한 결과는 지진 기록 분석을 인위 신호의 원인을 밝혀내기 위한 조사에 활용할 수 있음을 보여준다.
The characteristics of man-made signals were identified by analyzing the records of a temporary seismograph station installed at the Jang Bogo Station in Terra Nova Bay, Antarctica, during the activities of the second overwinter party. The records were from March 8, 2015, when the icebreaker Araon was anchored near the isolated station to provide necessary supplies and winter personnel change. While the Araon was in the anchorage, various man-made signals were generated at the station. Representative sources of such signals include machinery such as generators essential to operate the station and the Araon as well as helicopters and vehicles that transport personnel and materials. Since the machinery uses engine or motor, they generate signals at specific frequency bands. Characteristics of such man-made signals were identified from seismic records. They were then compared to the frequency bands of signals that could be calculated using the specifications of known mechanical devices. The signal computed for each device was an exact match for the signal observed, and could be used to obtain information about the operating times, movements, and paths of the sources. Thus, these results showed that seismic records can be used to investigate the causes of man-made signals.