본문 바로가기 주메뉴 바로가기
국회도서관 홈으로 정보검색 소장정보 검색

초록보기

 Despite its capability of various structural uses and its efficiency as a structural material, concrete has a problem with its tendency to be fairly massive to match the needed strength in comparison with steel materials. Instead of normal Portland concrete, lightweight concrete can be utilized to reduce the weight of completed structure, to expand span and to contract the width of section, particularly high-strength lightweight concrete. The purpose of this study is to provide better insight into the strength-enhancement of high-strength lightweight concrete, gained through an experiment.

In the experiment, four kinds of cement were used: ultra-high early strength cement, micro cement, normal Portland cement, and low heat cement. Comparing the numerical values of strength at two concrete of 7days and 28days, the analysis of different features of strength each concrete had, was conducted. The change in compressive strength depending on whether silica fume was added as an additive was also analyzed.

For the high-strength lightweight concrete to obtain high compressive strength up to 60Mpa, the addition of silica fume, super-plasticizer and water reducing agent are absolutely essential.

권호기사

권호기사 목록 테이블로 기사명, 저자명, 페이지, 원문, 기사목차 순으로 되어있습니다.
기사명 저자명 페이지 원문 목차
화력발전소에서 발생된 석탄회의 재활용현황 및 연구동향 강민아 ,강승구 pp.1-12
MAS계 결정화유리의 LED 패키지 적용 강승구 ,조시내 pp.13-21
음성 탐지를 위한 특징 계수로서의 스펙트럼 엔트로피에 관한 연구 구본응 pp.23-39
안드로이드 기반의 전자 메뉴판의 설계 및 구현 김명집 ,장성훈 ,어유경 ,정세봉 ,김도윤 ,성동수 ,이건배 pp.41-51
고강도 경량콘크리트 개발을 위한 실험적 연구 김성칠 pp.53-68
인공골재를 사용한 고강도 경량콘크리트의 강도향상에 관한 실험적 연구 김성칠 ,이동건 pp.69-89
GPS/Leveling을 이용한 지구중력장 모델 정확도 분석 :중부지방을 중심으로 김정현 ,이병길 pp.91-102
보강토 옹벽의 배수시설 개선으로 인한 안정성 향상에 관한 연구 박영주 ,이영생 pp.103-113
SVM을 이용한 특허문서 분류기의 설계 및 구현 박찬정 ,성동수 ,이건배 pp.115-128
엔진 가진력이 차체 비틀림 특성과 주행거동에 미치는 영향 안종성 ,김용호 ,유충준 pp.129-141
멀티터치 기술의 특허동향 오혁 ,구자상 ,김미진 ,성동수 ,이건배 pp.143-156
Wi-Fi를 이용한 실내 위치인식 기반의 강의 시스템 설계 및 구현 윤상현 ,김경태 ,김상민 ,이훈 ,임햇살 ,성동수 ,이건배 pp.157-170
막온도가 기본유체가 흐르는 실린더 주위 대류열전달계수 변화에 미치는 영향 이신표 pp.171-181
자동화를 위한 소형 다축 CNC 머신 개발 이양창 ,이준성 pp.183-197
절삭공구의 홀더좌면 가공을 위한 좌표변환 이양창 ,이준성 pp.199-209
Seismic analysis of penetration cooling water pump Lee Joon Seong ,Baek Seung Hyun ,Lee Yang Chang pp.211-222
Cordierite계 조성 유리로부터 Mica와 Mullite 결정화 유리의 제조 김용성 ,강승구 pp.223-234