생몰정보
소속
직위
직업
활동분야
주기
서지
국회도서관 서비스 이용에 대한 안내를 해드립니다.
검색결과 (전체 1건)
원문 있는 자료 (1) 열기
원문 아이콘이 없는 경우 국회도서관 방문 시 책자로 이용 가능
초록보기 더보기
본 연구는 포화-압밀-전단 제어형 링전단시험장치를 이용하여 (i) 전단시간에 따른 전단응력 특성, (ii) 구속압과전단속도에 따른 전단특성 및 (iii) 전단속도에 따른 전단응력 특성에 대한 연구를 수행하였다. 이질 재료간의 전단특성을 살펴보고자 낙동강 모래와 해안 점토를 사용하였다. 본 연구에서는 모래와 모래, 점토와 점토, 모래와 점토끼리의전단특성을 살펴보고자 비배수 조건에서 특정 구속압(50과 100kPa)에 대한 실험을 1차적으로 수행하였다. 모든 실험은 특정 구속압에 대해 300sec 동안 자동 압밀조건을 거친 후 전단실험을 수행하였다. 2차 실험으로 세 시료에 대한수직응력 변화에 따른 전단응력 특성을 살펴보고자 수직응력을 20~150kPa까지 단계별로 높여가며 실험을 수행하였다. 마지막으로 특정 구속압에 대해 전단속도를 0.01, 0.1, 1, 10, 100mm/sec까지 5 단계로 나누어 실험을 수행하였다. 이질재료 간의 전단응력은 특정 구속압 하에서 모래-점토의 전단응력(최대전단응력과 잔류전단응력)은 모래-모래보다는 작고, 점토-점토보다는 약간 큰 것으로 나타났다. 전단응력은 구속압과 전단속도에 의해 전단면에서 발생하는 입자파쇄와 젖음현상에 의존하는 것으로 나타났다.The shear stress characteristics of landslide materials can be affected by various factors. We examined the shear stress characteristics of two different soils using ring-shear apparatus, in which saturation-consolidation-shearing speed can be easily controlled. This paper presents (i) shear stress-time characteristics, (ii) shear stress depending on normal stress and shear speed and (iii) shear stress as a function of shearing speed. Materials used in this paper were the Nakdong River sand and muds taken from Jinhae coastal area in Korea. Samples were prepared in three types: Sand (upper)-Sand (lower), Clay (upper)-Clay (lower) and Sand (upper)-Clay (lower). The upper and lower indicate the samples placed in upper and lower ring shear boxes, respectively. For given normal stresses (50 and 100 kPa) and shearing speed (0.1mm/sec), we performed ring shear tests. Then the failure lines were determined in the second test. Last, we determined the shear stress characteristics depending on different shearing speeds, such as 0.01, 0.1, 1, 10, 100 mm/sec. As a result, we found that shear stress characteristics are strongly dependent on above three factors. The shear stress of Sand (upper)-Clay (lower) is smaller than that of Sand (upper)-Sand (lower), but slightly larger than that of Clay (upper)-Clay (lower). The shear stress is also characterized by grain crushing and wetting process at slip surface.
권호기사보기
참고문헌 (15건) : 자료제공( 네이버학술정보 )더보기
원문구축 및 2018년 이후 자료는 524호에서 직접 열람하십시요.
도서위치안내: 정기간행물실(524호) / 서가번호: 국내13
2018년 이전 정기간행물은 온라인 신청(원문 구축 자료는 원문 이용)
우편복사 목록담기를 완료하였습니다.
* 표시는 필수사항 입니다.
* 주의: 국회도서관 이용자 모두에게 공유서재로 서비스 됩니다.
저장 되었습니다.
로그인을 하시려면 아이디와 비밀번호를 입력해주세요. 모바일 간편 열람증으로 입실한 경우 회원가입을 해야합니다.
공용 PC이므로 한번 더 로그인 해 주시기 바랍니다.
아이디 또는 비밀번호를 확인해주세요