본문 바로가기 주메뉴 바로가기
22대 대한민국 국회 국회정보길라잡이 국회의원검색
회원가입 로그인
HOME

정보검색

소장정보 검색

국회도서관 홈으로 정보검색 소장정보 검색
결과 내 검색 동의어 포함
결과 내 검색 동의어 포함

-

초록보기

The aim of this study is to provide a clear and accessible method to obtain accurate true-stress strain data, and to extend the limited material data beyond the ultimate tensile strength (UTS) for AISI 304L. AISI 304L is used for the outer construction for some types of nuclear transport packages, due to its postyield ductility and high failure strain. Material data for AISI 304L beyond UTS is limited throughout literature. 3D digital image correlation (DIC) was used during a series of uniaxial tensile experiments. Direct method extracted data such as true strain and instantaneous cross-sectional area throughout testing such that the true stress-strain response of the material up to failure could be created. Post processing of the DIC data has a considerable effect on the accuracy of the true stress-strain data produced. Influence of subset size and smoothing of data was investigated by using finite element analysis to inverse model the force displacement response in order to determine the true stress strain curve. The FE force displacement response was iteratively adapted, using subset size and smoothing of the DIC data. Results were validated by matching the force displacement response for the FE model and the experimental force displacement curve.

권호기사

권호기사 목록 테이블로 기사명, 저자명, 페이지, 원문, 기사목차 순으로 되어있습니다.
기사명 저자명 페이지 원문 목차
Variational nodal methods for neutron transport : 40 years in review Tengfei Zhang, Zhipeng Li p. 3181-3204

Effect of post processing of digital image correlation on obtaining accurate true stress-strain data for AISI 304L Olivia Angel, Glynn Rothwell, Russell English, James Ren, Andrew Cummings p. 3205-3214

Low-cycle fatigue behaviors of 316L austenitic stainless steel in high temperature water : effects of pre-soaking, dissolved oxygen, and boric acid & lithium hydroxide Yida Xiong, Yutaka Watanabe, Yuki Shibayama, Xiangyu Zhong, Nicolas Mary p. 3215-3224

Bayesian approach for prediction of primary water stress corrosion cracking in alloy 690 steam generator tubing Dayu Fajrul Falaakh, Chi Bum Bahn p. 3225-3234

Evaluation of cementation of intermediate level liquid waste produced from fission 99Mo production process and disposal feasibility of cement waste form Jong-Sik Shon, Hyun-Kyu Lee, Tack-Jin Kim, Gi-Yong Kim, Hongrae Jeon p. 3235-3241

Packing placement method using hybrid genetic algorithm for segments of waste components in nuclear reactor decommissioning Hyong Chol Kim, Sam Hee Han, Young Jin Lee, Dai Il Kim p. 3242-3249

Spent fuel characterization analysis using various nuclear data libraries Dušan Čalič, Marjan Kromar p. 3260-3271

Thickness evaluation of cr coating fuel rod using encircling ECT sensor Jeong Won Park, Jong Moon Ha, Hong Min Seung, Hun Jang, Wonjae Choi p. 3272-3282

Fault-tolerant control system for once-through steam generator based on reinforcement learning algorithm Cheng Li, Ren Yu, Wenmin Yu, Tianshu Wang p. 3283-3292

Surface removal of stainless steel using a single-mode continuous wave fiber laser to decontaminate primary circuits Ki-Hee Song, Jae Sung Shin p. 3293-3298

Linking nuclear energy, human development and carbon emission in brics region : do external debt and financial globalization protect the environment? Muhammad Sadiq, Riazullah Shinwari, Muhammad Usman, Ilhan Ozturk, Aktham Issa Maghyereh p. 3299-3309

Study of an improved and novel venturi scrubber configuration for removal of radioactive gases from NPP containment air during severe accident Mujahid Farooq, Ammar Ahmed, Kamran Qureshi, Ajmal Shah, Khalid Waheed, Waseem Siddique, Naseem Irfan, Masroor Ahmad, Amjad Farooq p. 3310-3316

(A) rapid and direct method for half value layer calculations for nuclear safety studies using MCNPX Monte Carlo code H.O. Tekin, Ghada ALMisned, Shams A.M. Issa, Hesham M.H. Zakaly p. 3317-3323

Application of probabilistic safety assessment (PSA) to the power reactor innovative small module (PRISM) Ibrahim Alrammah p. 3324-3335

Machine learning-based categorization of source terms for risk assessment of nuclear power plants Kyungho Jin, Jaehyun Cho, Sung-yeop Kim p. 3336-3346

Traffic management for large-scale evacuation with public transportation and calculation of appropriate operating ratio Seunghee Ham, Jun Lee, Sang Jo Lee p. 3347-3352

Dynamic response of a fuel assembly for a KSNP design earthquake Myung Jo Jhung, Youngin Choi, Changsik Oh p. 3353-3360

Shaking table test and numerical analysis of nuclear piping under lowand high-frequency earthquake motions Shinyoung Kwag, Seunghyun Eem, Jinsung Kwak, Hwanho Lee, Jinho Oh, Gyeong-Hoi Koo, Sungjin Chang, Bubgyu Jeon p. 3361-3379

Performance analysis of improved hybrid median filter applied to X-ray computed tomography images obtained with high-resolution photon-counting CZT detector : a pilot study Youngjin Lee p. 3380-3389

Does mudcake change the results of modeling gamma-gamma well-logging? Fatemeh S. Rasouli p. 3390-3397

Measurements of low dose rates of gamma-rays using position-sensitive plastic scintillation optical fiber detector Siwon Song, Jinhong Kim, Jae Hyung Park, Seunghyeon Kim, Taeseob Lim, Jin Ho Kim, Sin Kim, Bongsoo Lee p. 3398-3402

Optimization of block-matching and 3D filtering (BM3D) algorithm in brain spect imaging using fan beam collimator : phantom study Yongho Do, Youngkwon Cho, Seong-Hyeon Kang, Youngjin Lee p. 3403-3414

Impact of geometrical parameters on SGEMP responses in cylinder model Jian-Nan Chen, Jun-Jie Zhang p. 3415-3421

New algorithm to estimate proton beam range for multi-slit prompt-gamma camera Youngmo Ku, Jaerin Jung, Chan Hyeong Kim p. 3422-3428

Validation of MCS code for shielding calculation using SINBAD XiaoYong Feng, Peng Zhang, Hyunsuk Lee, Deokjung Lee, Hyun Chul Lee p. 3429-3439

Effect of the new photoatomic data library EPDL2017 to mass attenuation coefficient calculation of materials used in the nuclear medicine facilities using EpiXS software J.F.M. Jecong, F.C. Hila, C.V. Balderas, N.R.D. Guillermo p. 3440-3447

Potential of biochar reinforced concrete as neutron shielding material Riccardo Martellucci, Daniele Torsello p. 3448-3451

Age or environmental radiation dose rate : which is more correlated with cancer incidence rates in the Republic of Korea? Han Young Joo, Jae Wook Kim, So Yun Jeong, Jin Sik Choi, Joo Hyun Moon p. 3452-3458

(An) empirical study on the X-ray attenuation capability of n-WO3/n-Bi2O3/PVA with added starch Namuwonge Oliver, Ramzun Maizan Ramli, Nurul Zahirah Noor Azman p. 3459-3469

Radiation shielding properties of weathered soils : influence of the chemical composition and granulometric fractions Luiz F. Pires p. 3470-3477

Incorporation of anisotropic scattering into the method of characteristics Anisur Rahman, Deokjung Lee p. 3478-3487

(A) complete 3D map of bell glasstone spatial correction factors for brahmma subcritical core Shefali Shukla, Tushar Roy, Yogesh Kashyap, Mayank Shukla, Prashant Singh p. 3488-3493

Development of nodal diffusion code RAST-V for Vodoe-Vodyanoi Energetichesky reactor analysis Jaerim Jang, Siarhei Dzianisau, Deokjung Lee p. 3494-3515

(An) approach to minimize reactivity penalty of Gd2O3 burnable absorber at the early stage of fuel burnup in pressurized water reactor Umme Mahbuba Nabila, Md. Hossain Sahadath, Md. Towhid Hossain, Farshid Reza p. 3516-3525

Comparative study of constitutive relations implemented in RELAP5 and TRACE. 1, Methodology & wall friction Sung Gil Shin, Jeong Ik Lee p. 3526-3539

Numerical analysis of Poiseuille-Rayleigh-Bénard convection in supercritical carbon dioxide Zhipeng Wang, Hong Xu, Chong Chen, Gang Hong, Zhenguo Song, Yaoli Zhang p. 3540-3550

Design of large-scale sodium thermal-hydraulic integral effect test facility, STELLA-2 Jewhan Lee, Jaehyuk Eoh, Jung Yoon, Seok-Kwon Son, Hyungmo Kim p. 3551-3566

On the validation of ATHLET 3-D features for the simulation of multidimensional flows in horizontal geometries under single-phase subcooled conditions E. Diaz-Pescador, F. Schäfer, S. Kliem p. 3567-3579

Thermal stability of nitric acid solutions of reducing agents used in spent nuclear fuel reprocessing A.S. Obedkov, V.V. Kalistratova, I.V. Skvortsov, E.V. Belova p. 3580-3585

참고문헌 (39건) : 자료제공( 네이버학술정보 )

참고문헌 목록에 대한 테이블로 번호, 참고문헌, 국회도서관 소장유무로 구성되어 있습니다.
번호 참고문헌 국회도서관 소장유무
1 Pacific Nuclear Transport Limited, Packages, 2021 accessed Mar. 15, 2021, https://www.pntl.co.uk/safety/packages/. 미소장
2 International Atomic Energy Agency, Regulations for the Safe Transport of Radioactive Material, 2018 Edition, 2018 [Online]. Available: http://www-ns. iaea.org/standards/. 미소장
3 K. Zhao, L. Wang, Y. Chang, J. Yan, Identification of post-necking stress-strain curve for sheet metals by inverse method, Mech. Mater. 92 (Jan. 2016)107-118, https://doi.org/10.1016/j.mechmat.2015.09.004. 미소장
4 M.S. Joun, J.G. Eom, M.C. Lee, A new method for acquiring true stress-strain curves over a large range of strains using a tensile test and finite element method, Mech. Mater. 40 (7) (Jul. 2008) 586-593, https://doi.org/10.1016/j.mechmat.2007.11.006. 미소장
5 M. Dunand, D. Mohr, Hybrid experimental-numerical analysis of basic ductile fracture experiments for sheet metals, Int. J. Solid Struct. 47 (9) (May 2010)1130-1143, https://doi.org/10.1016/j.ijsolstr.2009.12.011. 미소장
6 L. Wang, W. Tong, Identification of post-necking strain hardening behavior of thin sheet metals from image-based surface strain data in uniaxial tension tests, Int. J. Solid Struct. 75 (76) (Dec. 2015) 12-31, https://doi.org/10.1016/j.ijsolstr.2015.04.038. 미소장
7 M. Kamaya and M. Kawakubo, “A Procedure for Determining the True Stress-Strain Curve over a Large Range of Strains Using Digital Image Correlation and Finite Element Analysis,” doi: 10.1016/j.mechmat.2011.02.007. 미소장
8 H.W.S. Sutton, A. Michael, Orteu Jean-Jos e, Image Correlation for Shape, Motion and Deformation Measurements, No. 2009, Boston, MA: Springer US, 2009. 미소장
9 P. Hariharan, Interferometry, in: Optical Interferometry, Elsevier, 2003, pp. 1-8. 미소장
10 W.H. Peters, W.F. Ranson, Digital imaging techniques in experimental stress analysis, Opt. Eng. 21 (3) (Jun. 1982), https://doi.org/10.1117/12.7972925. 미소장
11 M. Sutton, C. Mingqi, W. Peters, Y. Chao, S. McNeill, Application of an optimized digital correlation method to planar deformation analysis, Image Vis Comput. 4 (3) (1986) 143-150, https://doi.org/10.1016/0262-8856(86)90057-0. 미소장
12 M.A. Sutton, J. Yan, Computer vision for shape and deformation measurements:recent developments and applications, SAE Tech. Pap. 115 (2006)495-500, https://doi.org/10.4271/2006-01-0526. 미소장
13 Y. Bai, Effect of Loading History in Necking and Fracture Architected Materials Design and Fabrication Using Additive Manufacturing View Project [Online]. Available: https://www.researchgate.net/publication/38003378. 미소장
14 D. Mohr, M. Oswald, A new experimental technique for the multi-axial testing of advanced high strength steel sheets, Exp. Mech. 48 (1) (2008) 65-77, https://doi.org/10.1007/s11340-007-9053-9. 미소장
15 M. Dunand, D. Mohr, Optimized butterfly specimen for the fracture testing of sheet materials under combined normal and shear loading, Eng. Fract. Mech. 78 (17) (2011) 2919-2934, https://doi.org/10.1016/j.engfracmech.2011.08.008. 미소장
16 H. Ghadbeigi, C. Pinna, S. Celotto, Failure mechanisms in DP600 steel: initiation, evolution and fracture, Mater. Sci. Eng. A 588 (Dec. 2013) 420-431, https://doi.org/10.1016/j.msea.2013.09.048. 미소장
17 J. Li, G. Yang, T. Siebert, M.F. Shi, L. Yang, A method of the direct measurement of the true stressestrain curve over a large strain range using multi-camera digital image correlation, Opt Laser. Eng. 107 (Aug. 2018) 194-201, https://doi.org/10.1016/j.optlaseng.2018.03.029. 미소장
18 P.D. Versaillot, Y.F. Wu, Z.L. Zhao, Experimental study on the evolution of necking zones of metallic materials, Int. J. Mech. Sci. 189 (Jan. 2021) 106002, https://doi.org/10.1016/j.ijmecsci.2020.106002. 미소장
19 F. Zhu, P. Bai, J. Zhang, D. Lei, X. He, Measurement of true stress-strain curves and evolution of plastic zone of low carbon steel under uniaxial tension using digital image correlation, Opt Laser. Eng. 65 (Feb. 2015) 81-88, https://doi.org/10.1016/j.optlaseng.2014.06.013. 미소장
20 H.C. Ho, K.F. Chung, X. Liu, M. Xiao, D.A. Nethercot, Modelling tensile tests on high strength S690 steel materials undergoing large deformations, Eng. Struct. 192 (November 2018) 305-322, https://doi.org/10.1016/j.engstruct. 2019.04.057, 2019. 미소장
21 S. Yaofeng, J.H.L. Pang, Study of optimal subset size in digital image correlation of speckle pattern images, Opt Laser. Eng. 45 (9) (2007) 967-974, https://doi.org/10.1016/j.optlaseng.2007.01.012. 미소장
22 J. Baldoni, G. Lionello, F. Zama, L. Cristofolini, Comparison of different filtering strategies to reduce noise in strain measurement with digital image correlation, J. Strain Anal. Eng. Des. 51 (6) (2016) 416-430, https://doi.org/10.1177/0309324716646690. 미소장
23 S. Yoneyama, Basic principle of digital image correlation for in-plane displacement and strain measurement, Adv. Compos. Mater. 25 (2) (Mar. 2016) 105-123, https://doi.org/10.1080/09243046.2015.1129681. 미소장
24 W. Tong, An evaluation of digital image correlation criteria for strain mapping applications, Strain 41 (4) (2005) 167-175, https://doi.org/10.1111/j.1475-1305.2005.00227.x. 미소장
25 B. Pan, H. Xie, Z. Wang, Equivalence of digital image correlation criteria for pattern matching, Appl. Opt. 49 (28) (2010) 5501-5509, https://doi.org/10.1364/AO.49.005501. 미소장
26 B. Pan, Digital image correlation for surface deformation measurement: historical developments, recent advances and future goals, Meas. Sci. Technol. 29 (8) (2018), https://doi.org/10.1088/1361-6501/aac55b. 미소장
27 P. Reu, Stereo-rig design: creating the STEREO-RIG LAYOUT - PART 1, Exp. Tech. 36 (5) (2012) 3-4, https://doi.org/10.1111/j.1747-1567.2012.00871.x. 미소장
28 P. Reu, All about speckles: speckle density, Exp. Tech. 39 (3) (2015) 1-2, https://doi.org/10.1111/ext.12161. 미소장
29 P. Reu, Speckles and their relationship to the digital camera, Exp. Tech. 38 (4)(2014) 1-2, https://doi.org/10.1111/ext.12105. 미소장
30 R. Hu nady, M. Hagara, M. Kalina, The aspects of strain fields’ measurement performed on small surfaces using digital image correlation method, EAN 2014 - 52nd Int. Conf. Exp. Stress Anal. 1 (June, 2014) 334-342. 미소장
31 Y. Wang, S. C. Garcea, and P. J. Withers, “7.6 Computed Tomography of Composites,” doi: 10.1016/B978-0-12-803581-8.10250-4. 미소장
32 L.S. Athanasiou, D.I. Fotiadis, L.K. Michalis, Propagation of segmentation and imaging system errors, in: Atherosclerotic Plaque Characterization Methods Based on Coronary Imaging, Elsevier, 2017, pp. 151-166. 미소장
33 R.K. Blandford, D.K. Morton, S.D. Snow, T.E. Rahl, Tensile Stress-Strain Results for 304L and 316L Stainless Steel Plate at Temperature 2007 ASME Pressure Vessels and Piping Division Conference TENSILE STRESS-STRAIN RESULTS for 304L and 316L STAINLESS STEEL 1 PLATE at TEMPERATURE, 2007. 미소장
34 R. Bigger, et al., A Good Practices Guide for Digital Image Correlation, Oct. 2018, https://doi.org/10.32720/idics/gpg.ed1. 미소장
35 P. Reu, Hidden components of DIC: calibration and shape, Function-Part 1(2012). 미소장
36 British Standards Institution, BSI Standards Publication Testing Hardened Concrete, vol. 18, 2019. 미소장
37 L. Xue, Damage accumulation and fracture initiation in uncracked ductile solids subject to triaxial loading, Int. J. Solid Struct. 44 (16) (Aug. 2007)5163-5181, https://doi.org/10.1016/j.ijsolstr.2006.12.026. 미소장
38 Y. Bao, T. Wierzbicki, On fracture locus in the equivalent strain and stress triaxiality space, Int. J. Mech. Sci. 46 (1) (Jan. 2004) 81-98, https://doi.org/10.1016/j.ijmecsci.2004.02.006. 미소장
39 S. Baltic, J. Magnien, H.P. G€anser, T. Antretter, R. Hammer, Coupled damage variable based on fracture locus: modelling and calibration, Int. J. Plast. 126(Mar. 2020) 102623, https://doi.org/10.1016/j.ijplas.2019.11.002. 미소장

추천서가 (다양한 추천 자료를 만나보세요)

권호기사보기

권호기사 목록 테이블로 기사명, 저자명, 페이지, 원문, 기사목차 순으로 되어있습니다.
기사명 저자명 페이지 원문 기사목차