생몰정보
소속
직위
직업
활동분야
주기
서지
국회도서관 서비스 이용에 대한 안내를 해드립니다.
검색결과 (전체 1건)
원문 있는 자료 (1) 열기
원문 아이콘이 없는 경우 국회도서관 방문 시 책자로 이용 가능
목차보기더보기
[표제지 등]
제출문
요약문
SUMMARY
List of Figure
List of Table
목차
제1장 서론 23
제1절 연구 배경 23
제2절 연구 개발 내용 및 범위 24
제2장 Biodiesel Oil 개발 현황 26
제1절 개요 26
제2절 유지의 화학적 특성 및 연료적 특성 27
제3절 유지의 Biodiesel Oil로의 이용법 31
1. 희석법 31
2. 유지의 열분해법 및 microemulsion법 33
3. 유지의 에스테르화 35
제4절 Biodiesel 연료의 상업화 현황 24,25) 41
제3장 유지의 에스테르화 반응 기초 실험 44
제1절 개요 44
제2절 실험 44
1. 시료 44
2. 실험 장치 46
3. 실험 방법 48
4. 분석 방법 49
제3절 결과 및 고찰 57
1. 메탄올 혼합비에 따른 전환율 변화 57
2. 촉매 농도에 따른 전환율 변화 62
3. 반응 온도에 따른 전환율 변화 68
4. 폐 식용유 사용시의 전환율 72
5. 점도 74
제4절 결론 79
제4장 Biodiesel Oil 제조 Bench Scale Unit 설계 80
제1절 개요 80
제2절 기본 설계 80
1. 유지와 생성물의 물성치 80
2. 물질수지 83
3. 에너지 수지 87
제3절 공정 설명 90
제4절 상세설계 92
1. 반응기 92
2. Flash 증류기 93
3. 정치기 93
4. 세척탑 93
5. 건조탑 94
제5장 미강유 및 폐식용유의 미립화특성 실험 95
제1절 개요 95
제2절 분무화 이론 95
제3절 실험장치 및 실험방법 100
1. 실험장치 100
2. 실험방법 104
제4절 연구내용 및 결과 105
1. Biodiesel유의 특성실험 105
2. 미강유의 분무특성 실험 및 결과 108
3. 폐식용유의 분무특성 실험 및 결과 117
제5절 결론 122
제6장 엔진 적합성 평가 130
제1절 개요 130
제2절 재료 및 방법 130
1. 실험재료 130
2. 실험장치 132
3. 실험 방법 139
제3절 결과 및 고찰 140
1. 출력 및 토크 140
2. 연료소비율 141
3. 배기가스 배출농도 143
4. 배기가스 온도 146
5. 엔진오일 온도 148
6. 냉각수 온도 150
7. 기타 151
제4절 결론 152
제7장 종합 결론 및 건의 사항 154
참고문헌 156
(표 1-1) 2개년 사업의 연차 별 연구 내용 및 범위 25
(표 2-1) 여러가지 동·식물 유지의 화학적 성질 25) 29
(표 2-2) 여러가지 동·식물 유지의 물리적 성질 26) 30
(표 2-3) 유지와 Diesel 연료 특성 비교 6) 30
(표 2-4) 메틸에스테르화 연료와 디젤연료의 특성비교 36
(표 2-5) biodiesel fuel의 상업화 plants. 25) 43
(표 3-1) The properties of rice bran oil sample 45
(표 3-2) Fatty acid composition of rice bran oil sample 45
(표 3-3) The properties of used frying oil sample 46
(표 3-4) Instrument and operation condition of HPLC 52
(표 3-5. 1) Viscosity of the rice bran oil esters at various temperatures 77
(표 3-5. 2) Viscosity of the used frying oil esters at various temperatures 77
(표 5-1) The Physical properties of Rice-bran oil, Used frying oil, and Light oil 105
(표 5-2) Number of droplets in the case of D<30μm (Rice-bran oil, 2200rpm) 110
(표 5-3) Percentage of distribution in the case of D<20μm (Distance:200mm) 112
(표 5-4) Number of droplets in the case of D<30μm (Used frying oil, 2200rpm) 117
(표 5-5) Percentage of distribution in the case of D<20μm (Distance:200mm) 119
(표 6-1) Specifications of the fuels tested 130
(표 6-2) Specifications of the engine tested 131
(표 6-3) Specifications of the dynamometer used 134
(표 6-4) Specifications of the throttle actuator 135
(표 6-5) Specifications of the exhaust gas analyzer used 136
(표 6-6) Specifications of the temperature sensors installed 137
(표 6-7) Specifications of the fuel heater used 137
[그림 2-1] US-2D 연료와 메틸에스테르유의 HC, CO, NOx 및 분진배출. 22) 39
[그림 2-2] 대표적 메틸에스테르화 제조공정 23) 40
[그림 3-1] Apparatus(Appratus) used for the esterification. 47
[그림 3-2] Separation of free fatty acid from oil. 53
[그림 3-3] HPLC chromatogram of separated fatty acids. 54
[그림 3-4] Effects of methanol mixing ratio on the rice bran oil conversion (sodium methoxide catalyst) 59
[그림 3-5] Effects of methanol mixing ratio on the rice bran oil conversion (sodium hydroxide catalyst) 60
[그림 3-6] Effects of methanol mixing ratio on the rice bran oil conversion (potassium hydroxide catalyst) 61
[그림 3-7] Effects of the concentration of sodium methoxide on the rice bran oil conversion. 64
[그림 3-8] Effects of the concentration of sodium hydroxide on the rice bran oil conversion. 65
[그림 3-9] Effects of the concentration of potassium hydroxide on the rice bran oil conversion. 67
[그림 3-10] Effects of the reaction temperature on the rice bran oil conversion (sodium methoxide catalyst) 69
[그림 3-11] Effects of the reaction temperature on the rice bran oil conversion (sodium hydroxide catalyst) 70
[그림 3-12] Effects of the reaction temperature on the rice bran oil conversion (potassium hydroxide catalyst) 71
[그림 3-13] Effects of methanol mixing ratio on the used frying oil conversion (sodium methoxide catalyst) 73
[그림 3-14] Effects of methanol mixing ratio on the used frying oil conversion (sodium hydroxide catalyst) 75
[그림 3-15] Effects of methanol mixing ratio on the used frying oil conversion (potassium hydroxide catalyst) 76
[그림 4-1] Flow diagram of esterification facilities. 91
[그림 5-1] Classification of nozzle. 96
[그림 5-2] Atomization system. 100
[그림 5-3] Schematic diagram of the Measuring system. 101
[그림 5-4] Ultrasonic oscillation system. 102
[그림 5-5] Vibration Horn. 103
[그림 5-6] Locations of the Ultrasonic Vibration Horn. 103
[그림 5-7] Change of Specific gravity and Kinematic Viscosity. 106
[그림 5-8] Photo of the experimental apparatus. 109
[그림 5-9] Photo of the measuring apparatus. 109
[그림 5-10] Distribution of Rice-bran oil droplets (2200rpm) 111
[그림 5-11] Percentage of distribution by sizes of droplets (2200rpm, 200mm). 113
[그림 5-12] Comparison(Comparision) of droplet size (Rice-bran oil) 113
[그림 5-13] Distribution of Rice-bran oil droplets by Magnesium oxide method (Distance:300mm) 115
[그림 5-14] Percentage of distribution by sizes of droplets (2200rpm, 200mm) 116
[그림 5-15] Comparison(Comparision) of droplet size (Rice-bran oil) 116
[그림 5-16] Distribution of Used frying oil droplets (2200rpm) 118
[그림 5-17] Percentage of distribution by sizes of droplets (2200rpm, 200mm) 120
[그림 5-18] Comparison(Comparision) of droplet size (Used frying oil) 120
[그림 5-19. 1] Photo of Rice-bran oil using immersion liquid method (2200rpm, 100mm) 123
[그림 5-19. 2] Photo of Rice-bran oil using immersion liquid method (2200rpm, 200mm) 124
[그림 5-19. 3] Photo of Rice-bran oil using immersion liquid method (2200rpm, 300mm) 125
[그림 5-20] Photo of Rice-bran oil using Magnesium oxide method (2200rpm, 300mm) 126
[그림 5-21. 1] Photo of Used frying oil using immersion liquid method (2200rpm, 100mm) 127
[그림 5-21. 2] Photo of Used frying oil using immersion liquid method (2200rpm, 200mm) 128
[그림 5-21. 3] Photo of Used flying oil using immersion liquid method (2200rpm, 200mm) 129
[그림 6-1] Overall view of the engine test equipments. 132
[그림 6-2] Schematic representation of the engine performance test system used. 133
[그림 6-3] Throttle controller, dynamometer controller, exhaust gas analyzer and smokemeter(from left) 134
[그림 6-4] Schematic diagram of the fuel heater. 138
[그림 6-5] Brake horse power vs. engine speed for three fuels. 140
[그림 6-6] Torque vs. engine speed for three fuels. 141
[그림 6-7] Specific fuel consumption vs. load for three fuels. 142
[그림 6-8] Specific fuel consumption vs. engine speed for three fuels. 143
[그림 6-9] Hydrocarbon vs. load for three fuels. 144
[그림 6-10] Hydrocarbon vs. engine speed for three fuels. 144
[그림 6-11] Carbon monoxide vs. load for three fuels. 145
[그림 6-12] Carbon monoxide vs. engine speed for three fuels. 146
[그림 6-13] Exhaust gas temperature vs. load for three fuels. 147
[그림 6-14] Exhaust gas temperature vs. engine speed for three fuels. 148
[그림 6-15] Oil temperature vs. load for three fuels. 149
[그림 6-16] Oil temperature vs. engine speed for three fuels. 149
[그림 6-17] Cooling water temperature vs. load for three fuels. 150
[그림 6-18] Cooling water temperature vs. engine speed for three fuels. 151
이용현황보기
가상서가
원문구축 및 2018년 이후 자료는 524호에서 직접 열람하십시요.
도서위치안내: / 서가번호:
우편복사 목록담기를 완료하였습니다.
* 표시는 필수사항 입니다.
* 주의: 국회도서관 이용자 모두에게 공유서재로 서비스 됩니다.
저장 되었습니다.
로그인을 하시려면 아이디와 비밀번호를 입력해주세요. 모바일 간편 열람증으로 입실한 경우 회원가입을 해야합니다.
공용 PC이므로 한번 더 로그인 해 주시기 바랍니다.
아이디 또는 비밀번호를 확인해주세요