본문 바로가기 주메뉴 바로가기
국회도서관 홈으로 정보검색 소장정보 검색

초록보기

강합성교량 상부 구조의 단면 단순화 경향과 더불어 프리캐스트 교량과 같이 전단연결재를 위한 전단포켓의 등간격 배치를 필요로 하는 전단연결부의 설계를 위해서 대직경 스터드가 제안되었다. 25mm 이상의 직경을 가진 스터드 전단연결재에 대한 push-out 실험 결과를 바탕으로 합성보에서의 거동을 평가하기 위하여 40% 합성정도를 가진 부분합성보를 제작하여 정적실험을 수행하였다. 전단연결재의 직경과 배치를 변수로 설계된 부분합성보의 극한 강도 및 수평전단력의 재분배를 평가하고 전단지간내의 스터드들의 그룹파괴를 확인하였다. 전단연결부의 강도가 부분합성보의 강도를 지배하기 때문에 이로부터 전단연결재의 전단강도를 평가하였는데 push-out 실험결과에 비해서 상당히 높은 수준의 강도 증가를 보여주었다. 하중-상대변위 곡선으로부터 대직경 스터드의 합성보에서의 충분한 연성과 하중재분배 능력을 확인하였다. 대직경 스터드를 적용하여 등간격 배치를 할 경우에 정적 거동에는 문제가 없는 것으로 나타났다.

studs were suggested not only for the design of steel-concrete composite bridges with simplified sections but also for the shear connection in precast decks requiring uniform distribution of shear pockets. Based on the push-out test results on studs with diameters of more than 25 mm, partial composite beams with 40%-degree shear connection were fabricated, and static tests were performed. The ultimate strength and horizontal shear load redistribution of partial composite beams, which have parameters of stud shank diameters and distribution, were evaluated, and group failure in the shear span was observed. Since the flexural strength of composite beams are dependent on the strength of their shear connection, the strength of the stud connection was estimated and it showed considerably higher shear strength. From the load-slip curves, the sufficient ductility and load redistribution of large studs were confirmed. Uniformly distributed large studs can provide proper ultimate behavior of composite beams.

권호기사

권호기사 목록 테이블로 기사명, 저자명, 페이지, 원문, 기사목차 순으로 되어있습니다.
기사명 저자명 페이지 원문 목차
경량기포모르터와 합성한 경량형강 벽체의 전단 저항 이상섭 ;배규웅 pp.397-406

고장력 볼트 이음부의 3차원 유한요소 해석 심재수 ;김춘호 ;김동조 pp.407-414

무도장 내후성강의 장기 내식성 및 그 현장즉시측정법 박정렬 ;김규영 pp.415-423

부분합성보를 이용한 대직경 스터드의 구조거동 평가 심창수 ;이필구 ;하태열 pp.425-432

압축을 받는 냉간성형 C-형강 기둥의 온도상승에 따른 국부좌굴 특성 백태순 ;강성덕 ;강문명 pp.433-442

예비 구조설계를 위한 유전알고리즘을 이용한 다단계 인공신경망에 관한 연구 최병한 pp.443-452

작은 축력을 받는 H형강 기둥의 베이스플레이트 거동과 설계 심기철 ;김은화 ;김원기 pp.453-461
중심 압축력을 받는 각형강관기둥 베이스플레이트의 지압응력과 설계에 대한 연구 이승준 ;김정현 pp.463-470

축압축력을 받는 노출형 원형강관 주각의 거동 이태규 ;이명재 pp.471-478

A shape control of welded joints to improve fatigue strength 강창입 ;국승규 ;이동욱 pp.479-492

횡리브로 보강된 복합적층 원통형 쉘의 좌굴거동에 관한 연구 장석윤 pp.493-503

참고문헌 (15건) : 자료제공( 네이버학술정보 )

참고문헌 목록에 대한 테이블로 번호, 참고문헌, 국회도서관 소장유무로 구성되어 있습니다.
번호 참고문헌 국회도서관 소장유무
1 (2003) 대직경 스터드 전단연결재의 피로거동, 미소장
2 (2003) 대직경 스터드 전단연결재의 정적거동, 미소장
3 (1999) 합성교량 스터드 전단연결부의 극한한계상태, 미소장
4 (2002) Large Shear Studs for Composite Action in Steel Bridge Girders Journal of Bridge Engineering, 미소장
5 (1997) Design of composite steel and concrete structures, 미소장
6 (2000) Resistance of stud shear connectors to fatigue, 미소장
7 (1983) Effects of concrete placing direction on static and fatigue strengths of stud shear connectors Tech. Rept. Osaka University, 미소장
8 (1967) Shear connectors in steel-concrete composite beams for bridges 1 Static and fatigue tests on push-out specimens, 미소장
9 (1971) CP117 and shear connectors in steel-concrete composite beams with made with normal-density and lightweight concrete, 미소장
10 (1986) The shear stiffness of stud shear connections in composite beams, 미소장
11 (1987) The strength of stud shear connectors in composite beam, 미소장
12 (1992) Residual strength of structural component subjected to cyclic loads Journal of Structural Engineering, 미소장
13 (1971) Shear Strength of stud connectors in light-weight and normal-weight concrete Engineering Journal of American Institute of Steel Construction, Ollgaard J.G. et al. 미소장
14 (2000) The Behavior of Shear Connection in Composite Beam with Full-Depth Precast Slab , 미소장
15 (1962) Test Results and Design Recommendations for Composite Beams, 미소장