본문 바로가기 주메뉴 바로가기
국회도서관 홈으로 정보검색 소장정보 검색

초록보기

본 논문은LTCC 공정에 기반을 둔 GSM/DCS dual band 의 소형화된antenna switch module을 공정변수 따른 특성의 왜곡을 안정화시키는 연구를 수행하였다. 특히 tape thickness의 변화에 따라 패턴간의 기생 커플링이 주된 변수로 작용한다. 두께 50?um인 tape으로 제작된 시편의 사이즈는 4.5×3.2×0.8 mm3이고 insertion loss는 Rx mode와 Tx mode 각각 1dB, 1.2dB 이하이다. 공정상에서 tape thickness의 변화에 따라 개발된 모듈의 특성 안정성을 검증하기 위해 각 블록-다이플렉서, 필터, 바이어스 회로-을 probing method을 이용, 측정하였고, 각 블록간의 상호관계는 VSWR을 계산하여 비교하였다. 또한 회로적 관점에서 특성 개선을 위해 바이어스 회로부분의 집중소자형과 분포소자형을 구현하여 서로 비교 분석하였다. 이를 통해 각 블록의 측정과 계산된 VSWR의 데이터는 공정변수에 의해 변화된 전체 module의 특성과 안정성 거동을 파악하는데 좋은 정보를 준다. Tape thickness변화에도 불구하고 다이플렉스의 matching 값은 연결되는 바이어스 회로와 LPF의 matching값과 상대 matching이 되면서, 낮은 VSWR을 유지하여 전체 insertion loss가 안정화 되는 것을 확인하였다. 더불어 분포소자형 바이어스 회로보다는 집중소자형이 다른 회로블럭과의 관계에서 더 좋은 매칭을 이루어 loss 개선에 일조하였다. Tape thickness가 6 um이상의 변화를 가져와도 집중소자형 바이어스 회로는 낮은 손실을 유지하여 더 넓은 안정 범위를 가져오기 때문에 양산에 적합한 구조가 될 수 있다. 그리고, probing method에 의한 안정성 특성 추출은 세라믹에 임베디드된 수동회로들의 개발에 충분히 적용될 수 있다.

A compact antenna switch module for GSM/DCS dual band applications based on multilayer low temperature co-fired ceramic (LTCC) substrate is presented. Its size is 4.53.20.8 mm3 and insertion loss is lower than 1.0 dB at Rx mode and 1.2 dB at Tx mode. To verify the stability of the developed module to the process window, each block that is diplexer, LPFs and bias circuit is measured by probing method in the variation with the thickness of ceramic layer and the correlation between each block is quantified by calculating the VSWR. In the mean while, two types of bias circuits lumped and distributed are compared. The measurement of each block and the calculation of VSWR give good information on the behavior of full module. The reaction of diplexer to the thickness is similar to those of LPFs and bias circuit, which means good relative matching and low value of VSWR, so total insertion loss is maintained in quite wide range of the thickness of ceramic layer at both band. And lumped type bias circuit has smaller insertion itself and better correspondence with other circuit than distributed stripline structure. Evaluated ceramic module adopting lumped type bias circuit has low insertion loss and wider stability region of thickness over than 6um and this can be suitable for the mass production. Stability characterization by probing method can be applied widely to the development of ceramic modules with embedded passives in them.

권호기사

권호기사 목록 테이블로 기사명, 저자명, 페이지, 원문, 기사목차 순으로 되어있습니다.
기사명 저자명 페이지 원문 목차
시효 처리에 의한 42Sn-58Bi 솔더와 무전해 Ni-P/치환 Au UBM간의 계면 반응 조문기 ;이혁모 ;부성운 ;김태규 pp.95-103

Dual band antenna switch module의 LTCC 공정변수에 따른 안정성 및 특성 개선에 관한 연구 이중근 ;유찬세 ;유명재 ;이우성 pp.105-109

75 ㎛ Cu via가 형성된 3D 스택 패키지용 interconnection 공정 및 접합부의 전기적 특성 이광용 ;오택수 ;원혜진 ;이재호 ;오태성 pp.111-119

무연 복합 솔더의 미소경도에 미치는 기계적 변형과 온도의 영향 이주원 ;강성권 ;이혁모 pp.121-128

펄스-역펄스 전착법을 이용한 SiP용 via의 구리 충진에 관한 연구 배진수 ;장근호 ;이재호 pp.129-134

Effects of temperature amplitude and loading frequency on alternating current-induced damage in Cu thin films Young-bae Park pp.135-140

용매열합성을 이용한 구형 TiO₂-SiO₂ 복합체 제조 및 열적특성 조태환 ;박성진 pp.141-147

게이트를 상정한 니켈 코발트 복합실리사이드 박막의 물성연구 김상엽 ;정영순 ;송오성 pp.149-154

ITO/PEDOT:PSS/MEH-PPV/Al 구조에서 MEH-PPV농도에 따른 유기발광다이오드의 전기·광학적 특성 공수철 ;백인재 ;유재혁 ;임현승 ;장호정 ;장지근 pp.155-159

강유전체 fresnoite 결정을 갖는 유리의 제조 및 결정화 거동 이회관 ;채수진 ;강원호 pp.161-166

PCB에서의 ECM 특성에 미치는 SnPb 솔더 합금의 분극거동의 영향 이신복 ;유영란 ;정자영 ;박영배 ;김영식 ;주영창 pp.167-174

평행 결합선로를 이용한 광대역 180˚ bit X-대역 위상 변이기의 설계 성규제 ;박현식 ;김동연 pp.175-179

나노리소그래피 마스크용 블록공중합체 나노구조 필름의 제조 박대호 ;손병혁 ;정진철 ;진왕철 pp.181-186

참고문헌 (4건) : 자료제공( 네이버학술정보 )

참고문헌 목록에 대한 테이블로 번호, 참고문헌, 국회도서관 소장유무로 구성되어 있습니다.
번호 참고문헌 국회도서관 소장유무
1 (1998) Microwave Engineering, Wiley 미소장
2 (1980) Microwave Filters, Impedance-Matching Networks, and Coupling Structures, Artech House 미소장
3 (2001) Microstrip Filters for RF/Microwave Applications, John Wiley & Sons 미소장
4 Antenna Switch Dulplexer For Dualband Phone Using LTCC Multilayer Technology, 미소장