본문 바로가기 주메뉴 바로가기
국회도서관 홈으로 정보검색 소장정보 검색

초록보기



The microstructure of Ni-YSZ cermets was controlled with fine and coarse starting powders (NiO and YSZ) to obtain a optimumstrong and conductive tubular anode support for SOFCs. Three types of cermets with different microstructures, i.e., coarse Ni-fineYSZ, fine Ni-coarse YSZ, and fine Ni-fine YSZ, were fabricated to investigate their electrical and mechanical properties. The cermetsfrom fine NiO powder showed high electrical conductivity due to the enhanced percolation of Ni particles. The cermet by fine Ni andcoarse YSZ showed excellent electrical conductivity (>1000 S/cm) despite its high porosity (~40%) but it showed poor mechanicalstrength due to the lack of percolation by YSZ particles and due to large pores. Thus fine NiO and YSZ powders were used to makestrong and conductive Ni-YSZ support tube by extrusion. The microstructure of the anode tube was modified by the amount ofpolymeric additives and carbon black, a pore former. Ni-YSZ tube (porosity ~34%) with the finer microstructure showed betterwiththe length from 20 to 40cm were successfully fabricated with the optimized composition of materials and polymeric additives.

권호기사

권호기사 목록 테이블로 기사명, 저자명, 페이지, 원문, 기사목차 순으로 되어있습니다.
기사명 저자명 페이지 원문 목차
저온 작동 박막 고체산화물 연료전지 심준형 ;차석원 ;Turgut M. Gür ;Fritz B. Prinz pp.751-757

Characterization of Ln_0.8_Sr_0.2_CoO_3-δ_(Ln=Gd, Nd, Pr, Sm, or Yb) as cathode materials for low-temperature SOFCs Jung Woon Choi ;Ju Hyun Kang ;Han Ji Kim ;Kwang Soo Yoo pp.758-763

Characteristics of Ni/YSZ cermet prepared by mechanical alloying method for the high temperature electrolysis of steam Soo-tae Choo ;Kyoung Hoon Kang ;Ui-seok Chae ;Hyun Seon Hong ;Kab Jin Hwang ;Ki Kwang Bae ;Seock-jae pp.764-767

압출공정에 의해 제조된 Ni-YSZ 원통형 음극 지지체의 특성 유지행 ;김영운 ;박건우 ;서두원 ;이시우 ;우상국 pp.768-774

열 사이클에 따른 고체산화물 연료전지의 기계적 및 전기적 특성 양수용 ;박재근 ;이태희 ;유정대 ;유영성 ;박진우 pp.775-780

SOFC 음극 제조를 위한 NiO가 코팅된 YSZ 분말의 합성 임광영 ;한인동 ;심수만 ;박준영 ;이해원 ;김주선 pp.781-787

박막 테이프캐스팅과 동시소성에 의한 연료극 지지형 SOFC 단전지 제조 문 환 ;김선동 ;현상훈 ;김호성 pp.788-797

패턴된 전극을 가진 표면 전도형 단실형 고체산화물 연료전지의 제조 안성진 ;김용범 ;문주호 ;이종호 ;김주선 pp.798-804

Ni의 산화가 고체산화물 연료전지용 Ni/YSZ 연료극의 미세조직과 전해질의 균열에 미치는 영향 임준실 ;최종훈 ;권오종 pp.805-811

고체산화물 연료전지의 전극과 스택운영의 기능적 분석 배중면 ;김기현 ;지현진 ;김정현 ;강인용 ;임성광 ;유영성 pp.812-822

중·저온형 SOFC를 위한 Ni-YSZ 연료극 지지체형 단전지 미세구조와 전기적 특성 박재근 ;양수용 ;이태희 ;오제명 ;유영성 ;박진우 pp.823-828

자기장이 페라이트 슬러리의 주입시간에 미치는 영향 임종인 ;육영진 ;이영진 pp.829-832

원자로급 흑연의 산화거동 및 산화에 따른 물성변화 조광연 ;김경자 ;임연수 ;정윤중 ;지세환 pp.833-838

석탄계 피치를 이용한 고밀도 흑연 제조 조광연 ;김경자 ;류도형 ;임광현 ;김정일 ;신인철 ;임연수 ;주혁종 pp.839-845

재생미분말의 흡착특성과 유동특성 이종규 ;추용식 ;정석조 pp.846-851

PLD(Pulsed laser deposition)를 이용한 청색 박막 형광체의 제조 및 특성분석 조상호 ;정유선 ;곽종호 ;손기선 pp.852-858

압축성형공정에 대한 알루미나 성형체 밀도분포의 FE 분석 임종인 ;육영진 pp.859-864

냉각 방법에 따른 모의 방사성폐기물 유리고화체의 특성평가 이강택 ;이규호 ;윤덕기 ;류봉기 ;김천우 ;박종길 ;황태원 pp.865-871

참고문헌 (7건) : 자료제공( 네이버학술정보 )

참고문헌 목록에 대한 테이블로 번호, 참고문헌, 국회도서관 소장유무로 구성되어 있습니다.
번호 참고문헌 국회도서관 소장유무
1 (2005) Impacts Asses-ment and Trade-Offs of Fuel Cell-Based Auxiliary PowerUnits, Part I: System Performance and Cost Modeling, 미소장
2 (2006) Engi-neering Aspects and Hardware Verification of a VolumeProducable Solid Oxide Fuel Cell Stack Design for DieselAuxiliary Power Units, 미소장
3 (2004) Fabrication and Properties ofAnode-Supported Tubular Solid Oxide Fuel Cells, 미소장
4 (1990) Electrical Resistivity of Composites, 미소장
5 (1973) Percolation and Conduction, 미소장
6 (2004) The Influence of Particle Shape and Size on Electric Conductivity of Metal-Polymer Composites, 미소장
7 (1997) Con-figuration and Electrical Behavior of Ni-YSZ Cermet with Novel Microstructure for Solid Oxide Fuel Cell Anodes, 미소장