권호기사보기
기사명 | 저자명 | 페이지 | 원문 | 기사목차 |
---|
대표형(전거형, Authority) | 생물정보 | 이형(異形, Variant) | 소속 | 직위 | 직업 | 활동분야 | 주기 | 서지 | |
---|---|---|---|---|---|---|---|---|---|
연구/단체명을 입력해주세요. |
|
|
|
|
|
* 주제를 선택하시면 검색 상세로 이동합니다.
목차
냉장고 파쇄 공정에서의 화재 위험성 및 예방에 관한 연구 / 이수경 ; 송동우 ; 배정애 1
요약 1
ABSTRACT 1
1. 서론 1
2. 리사이클링 공정에서의 화재 발생원인 분석 2
2.1. 라사이클링 공정 개요 2
2.2. 공정에서의 화재 발생 사례 조사 2
2.3. 냉장고 구성 요소를 통한 가연물 분석 2
2.4. 발화 가능 물질 성분 분석 3
2.5. 점화원의 형태 고찰 4
3. 리사이클링 공정에서의 화재 예방 및 방호대책 5
4. 결론 6
참고문헌 6
본 연구에서는 냉장고 리사이클링 공정에서 잦은 화재가 일어나는 것에 대해 정확한 화재 원인을 규명
하고자 한다. 이를 위하여 공정 내에서 발생되는 물질의 성분 및 농도를 분석을 통한 공정 시스템의 문
제점을 파악하여 근원적인 화재 및 폭발의 발생을 차단할 수 있는 예방대책을 제시하여 보았다. 연구를
수행하면서 얻은 결과들은 파쇄공정의 가연물로 폴리우레탄, 폴리우레탄 분진 및 가연성기체 혼합물인 사
이클로펜탄과 메탄의 존재 확인이며 점화원은 기계적 스파크인 마찰, 충격, 마찰열이라는 사실을 알 수 있
었다. 아울러 화재 양상은 폴리우레탄의 표면의 가연성 혼합 가스는 주로 사이클로펜탄의 점화, 폴리우레
탄 분진의 훈소 및 가연성혼합가스의 flash fire 임을 알 수 있었다. 가연물인 폴리우레탄과 가연성가스를
제거하는 방법, 점화원을 제거하는 방법 및 산소농도를 최소산소농도로 낮춰서 연소가 일어나지 않도록 하
는 방법 등의 예방대책과 화재 시 피해를 줄이기 위한 방호대책을 제시해 보았다.
In the recycling procedure of the refrigerator, the fire frequently breaks out. In this study, to clarify
the exact cause of the fire, the components and concentration of the materials produced in the process
are analysed as well as the problems in the process system, and the protective measure to prevent the
fire and the explosion fundamentally is proposed. In this procedure, the preventive measures of fire
by removing the combustible materials such as polyurethane and inflammable gases, by removing the
ignition sources and by reducing the oxygen concentration to the minimum are proposed along with
the protective measures to reduce the damage in the fire. In the crushing procedure where the fire or
explosion can break out in diverse ways, the forced ventilation or exhaust system applied to the small
partial ventilation facility are installed to reduce the concentration of inflammable gas mixture to
lower than the inflammable limit by injecting and exhausting the air forcibly.번호 | 참고문헌 | 국회도서관 소장유무 |
---|---|---|
1 | 금속자원리싸이클링의 필요성 | 소장 |
2 | Fire Characteristics of Plastic Insulating Materials from Cone Calorimeter Test | 소장 |
3 | 정종한, “냉장고 리사이클링 공정에서의 싸이클로펜탄 안전대책”, e-리사이클링(2008). | 미소장 |
4 | Factory Multual, “Caution-Plastics in construction, Part 1. Foamed Insulation”, Record, 3rd Quarter, pp. 6-11(1997). | 미소장 |
5 | Masaharu Nifuku, Hiroshi Tsujita, Kenji Fujino, Kenji Takaichi, Cyrille Barre, Makiko Hatori, Shuzo Fujiwara, Sadashige Horiguchi and Elsa Paya, “A Study on the Ignition Characteristics for dust explosion of Industrial Wastes”, Journal of Electrostatics, Vol.19, pp.128-132(2005). | 미소장 |
6 | National Institute of Standards and Technology (NIST), NIST Chemistry WebBook. | 미소장 |
7 | National Fire Protection Association (NFPA), “FIRE PROTECTION HANBOOK (Nineteenth Edition)”,NFPA, pp.8-210-8-219(2003). | 미소장 |
8 | Society of Fire Protection Engineers (SFPE), “SFPE Handbook of Fire Protection Engineering (Third Edition)“, SFPE, pp.2-229-2-245(2003). | 미소장 |
*표시는 필수 입력사항입니다.
*전화번호 | ※ '-' 없이 휴대폰번호를 입력하세요 |
---|
기사명 | 저자명 | 페이지 | 원문 | 기사목차 |
---|
번호 | 발행일자 | 권호명 | 제본정보 | 자료실 | 원문 | 신청 페이지 |
---|
도서위치안내: 정기간행물실(524호) / 서가번호: 국내14
2021년 이전 정기간행물은 온라인 신청(원문 구축 자료는 원문 이용)
우편복사 목록담기를 완료하였습니다.
*표시는 필수 입력사항입니다.
저장 되었습니다.