국문목차
표제지=0,1,4
목차=i,5,1
Table Contents=ii,6,1
List of Figures=iii,7,1
Abstract=iv,8,2
제I장 서론=1,10,3
제II장 이론적 배경=4,13,1
1. 도재용착 주조관의 구조 및 임상적 용도=4,13,2
2. 금속과 도재의 결합=6,15,2
3. 도재용착 주조관용 비 귀금속 합금의 조성 성분과 역할=7,16,1
4. 도재용착 주조관의 결함=7,16,2
제III장 실험방법=9,18,1
1. 실험 재료=9,18,1
2. 시편 제작 및 실험 방법=9,18,6
제IV장 실험 결과 및 고찰=15,24,1
1. 비커스 경도 및 로크웰 경도=15,24,1
2. Type A, B, C의 TRS(4점 굽힘-항절력) 실험=16,25,1
3. 주조시편의 조성 성분 분석=16,25,8
4./(5) 상변화 및 미세조직 분석=23,32,17
제V장 결론=40,49,1
References=41,50,3
감사의 글=44,53,2
Table.1. Composition of Rexillium III alloys=9,18,1
Table.2. Physical properties of Rexillium III alloys=9,18,1
Table.3. Content of new metal and old metal alloy used for the experiment=11,20,1
Table.4. Result of EDS composition for the Type A, B, C alloys(Weight 100%)=18,27,1
Fig.1. Photographs of dental porcelain metal crown=5,14,1
Fig.2. Schematic of TRS specimen.(units:㎜)=14,23,1
Fig.3. Photograph of TRS specimens=14,23,1
Fig.4. Results of (a) Vickers and (b) Rockwell Hardness tester=17,26,1
Fig.5. TRS Strength of Type A, B, C=19,28,1
Fig.6. Energy Dispersive X-ray Spectrometer of Type A, B, C=20,29,1
Fig.7. SEM photographs and EDS mapping of Type A5=21,30,1
Fig.8. SEM photographs and EDS mapping of Type B5=22,31,1
Fig.9. SEM photographs and EDS mapping of Type C5=24,33,1
Fig.10. X-ray diffraction patterns of type A1, A3, A5=25,34,1
Fig.11. X-ray diffraction patterns of type B1, B3, B5=26,35,1
Fig.12. X-ray diffraction patterns of Type C1, C3, C5=28,37,1
Fig.13. Optical-Micrographs of raw material alloys=29,38,1
Fig.14. Optical-Micrographs of Type A alloys=30,39,1
Fig.15. Optical-Micrographs of Type B alloys=32,41,1
Fig.16. Optical-Micrographs of Type C alloys=33,42,1
Fig.17. SEM photographs of microstructure surfaces type A alloys=34,43,1
Fig.18. SEM photographs of microstructure surfaces type B alloys=35,44,1
Fig.19. SEM photographs of microstructure surfaces type C alloys=36,45,1
Fig.20. SEM photographs of fracture surfaces Type A1, B1, C1=39,48,1