표제지
목차
Abstract 8
I. 서론 10
II. 임베디드 시스템 12
1. 임베디드 시스템의 정의 12
2. 임베디드 시스템의 특징 13
3. 임베디드 시스템과 리눅스의 관계 13
4. 임베디드 시스템 장비 LDS1000 14
1) LDS1000 구성 14
2) 호스트와 타깃의 구성 16
III. 센서 네트워크 18
1. 센서 네트워크 정의 18
2. 기술적 특성 19
3. 센서 네트워크의 프로토콜 스택 19
4. 센서 네트워크의 표준화 동향 21
1) IEEE 802.15.4 / 4b 21
2) IEEE 802.15.4a 23
3) IEEE 802.15.5 24
IV. 시스템 설계 및 구현 25
1. 연구 범위 25
2. 설계 노드의 제원 25
1) 센서 25
2) 노드 26
3. 노드 설계 27
4. 시스템 구현 30
1) 노드 구현 30
2) 호스트 환경 설정 31
3) 타깃(LDS1000) 환경 설정 36
4) NFS 부팅을 위한 커널 설정 및 커널 이미지 제작 40
5) 커널 이미지 다운로드 및 부팅 42
V. 실험 및 평가 44
1. 센서노드와 호스트 간 데이터 전송 44
1) 통신과 데이터 송수신 44
2) 수신 데이터 45
2/3. 평가 50
VI. 결론 및 향후과제 52
VII. 참고문헌 54
Table 1. Construction items and uses of LDS1000 15
Table 2. Interface settings and uses of LDS1000 16
Table 3. Connection items and purposes of PC and LDS1000 17
Table 4. Special feature of IEEE802.15.4-2003 standard 22
Table 5. Special feature of IEEE802.15.4-2006 23
Table 6. Sensor performance specifications 26
Table 7. Host installation items 31
Table 8. Setting items and meanings of the serial standards 34
Table 9. Settings and meanings of parameters 37
Table 10. Commands for settings of system parameters 38
Table 11. SHT11 list of command 45
Fig. 1. LDS1000 15
Fig. 2. Reference model of sensor network 19
Fig. 3. Protocol stack of sensor network 20
Fig. 4. Simplified block diagram of sensor node 27
Fig. 5. STR711FR2 block diagram 28
Fig. 6. SHT11 block diagram 29
Fig. 7. CC2420 simplified block diagram 29
Fig. 8. SHT11 PCB mounting 30
Fig. 9. The realization of sensor node network 30
Fig. 10. The installation of LDS1000 S/W 32
Fig. 11. The installation of cross compile S/W(Hardhat CDK 1.2) 33
Fig. 12. The minicom setting 34
Fig. 13. The setting of TFTP server 35
Fig. 14. The setting of NFS server 36
Fig. 15. Settings of parameters 38
Fig. 16. The error occurrence during kernel booting 39
Fig. 17. Before and after of modification 40
Fig. 18. Settings for NFS kernel booting 41
Fig. 19. The make of kernel image 42
Fig. 20. The kernel booting 43
Fig. 21. Activated node checking 44
Fig. 22. Sensing data received from Node-1 at the 1st test 46
Fig. 23. Sensing data received from Node-2 at the 1st test 47
Fig. 24. Sensing data received from Node-1 at the 2nd test 48
Fig. 25. Sensing data received from Node-2 at the 2nd test 48
Fig. 26. Sensing data received from Node-1 at the 3rd test 49
Fig. 27. Sensing data received from Node-2 at the 3rd test 50