표제지
감사의 글
목차
Abstract 7
연구사 8
Ⅰ. 서론 9
1. 연구 배경 9
2. 연구 동향 9
3. 연구 내용 10
Ⅱ. 이론적 배경 11
1. 압밀이론 11
2. Terzaghi의 일차원 압밀이론 11
3. 연직배수 공법의 이론 14
(1) 연직배수 공법 14
(2) Barron의 제안식 15
(3) Hansbo의 제안식 16
(4) Onoue의 제안식 19
4. 장래침하량 예측기법 20
(1) 쌍곡선법 20
(2) Hoshino법 22
(3) Asaoka법 24
5. 수치해석 기본이론 26
(1) 수치해석 개요 26
(2) 압밀해석 구성모델 26
6. 구성모델에 의한 해석 30
(1) Geometry작성 30
(2) 물성치 입력 31
(3) Mesh생성 31
(4) 경계조건 설정 32
(5) 시공단계 설정 32
(6) 해석 33
7. PCD(Plastic Cylindrical Drain)공법 34
Ⅲ. 현장개요 및 계측결과 36
1. 지형 및 지질 36
2. 지층분포 37
3. 계측 Data 38
(1) 현장 계측 38
(2) 계측 Data결과 39
Ⅳ. 침하량 비교분석 40
1. 쌍곡선법에 의한 장래침하량 예측 40
2. 수치해석에 의한 장래침하량 예측 46
(1) 해석에 사용된 물성치 46
(2) 해석순서 47
(3) 해석결과 48
Ⅴ. 결론 52
Notation 55
Reference 56
Table1. Compare PCD with PBD 35
Table2. Total settlement at time 39
Table3. An erro rby degree of consolidation at SP1 44
Table4. An error by degree of consolidation at SP2 45
Table5. Ground properties 46
Table6. Cam-Clay mode 47
Table7. Construction stage 47
Table8. An error between measure and MIDAS at SP1 50
Table9. An error between measure and MIDAS at SP2 51
Fig.1. Cross section of PVD in soft ground 14
Fig.2. Time dependence of measured settlement 20
Fig.3. Relation between t/(St-S0) and t(이미지참조) 22
Fig.4. Relation between t/(St-Si)2 and t(이미지참조) 24
Fig.5. Method of determining the final settlement(Asaoka) 25
Fig.6. Drawing up Geometry 30
Fig.7. Input the ground properties 31
Fig 8. Create Mesh 31
Fig.9. Boundary condition set 32
Fig.10. Define construction stage 32
Fig.11. Analysis result 33
Fig.12. PCD Deformation during settlement 35
Fig.13. Location map of subject project 36
Fig.14. Distribution chart of ground 37
Fig.15. The plan of study area 38
Fig.16. Regression analysis of α,β 41
Fig.17. Relation between load and α,β 42
Fig.18. Analysis result of settlement at SP 1 43
Fig.19. Analysis result of settlement at SP 2 43
Fig.20. Analysis result at SP1 48
Fig.21. Analysis result at SP2 48
Fig.22. Analysis result of settlement at SP1 49
Fig.23. Analysis result of settlement at SP2 49