표제지
Abstract
목차
제1장 서론 12
제2장 이론적 배경 13
2.1. 고무 이론 13
2.1.1. 고무의 구조와 특성 13
2.1.2. 고무 탄성 16
2.1.3. 에너지 탄성과 엔트로피 탄성 17
2.1.4. 열역학 제 2법칙과 엔트로피 20
2.1.5. 열 변화 21
2.1.6. NBR 21
2.1.7. 카본블랙 22
2.1.8. 실리카 23
2.2. 접착 이론 24
2.2.1. 기계적 맞물림 24
2.2.2. 확산이론 25
2.2.3. 정전기 이론 26
2.2.4. 흡착 이론 26
2.2.5. 화학 결합 29
2.2.6. 약한 계면층 29
2.3. 접착강도 측정 30
2.4. 고무층 접착 32
2.5. 접착층의 두께가 접착강도에 미치는 영향 33
제3장 실험 방법 34
3.1. 실험재료 34
3.2. 모재의 기계적 성질 34
3.3. 모재의 화학적 성질 38
3.4. 접착력 평가 42
3.4.1. 접착 시편 제작 42
3.4.2. 시험 방법 및 파단면 촬영 44
제4장 실험결과 및 고찰 47
4.1. 표면 거칠기가 접착 성능에 미치는 영향 47
4.2. 실험온도가 접착성능에 미치는 영향 47
4.3. 접착 파단면의 관찰 56
제5장 결론 65
참고문헌 66
[표 1.1] Tension test result 37
[표 2.1] Test outcomes per testing temperature and surface roughness 54
[표 3.1] Number of dimples per splice surface 63
[그림 2.1] Material design for rubber compounding 15
[그림 2.2] Model of end-pulling mechanism; (a)relaxed, (b)stretched 19
[그림 2.3] Contact angle of a sessile drop on solid surface 28
[그림 2.4] Sketch of peel pieces. (a)90˚Peel test, (b)180˚Peel test, (c)T-Peel test 31
[그림 3.1] Tensile strength measuring sample dumbbell No.3 35
[그림 3.2] Tensile strength measuring equipment 36
[그림 3.3] Pyrolysis GC/MS analyzing equipment 39
[그림 3.4] Pyrolysis fuselage disassembly pattern of preform 40
[그림 3.5] Analysis of main peak volume spectrum 41
[그림 3.6] Splice sample 43
[그림 3.7] Splice sample disconnection test 45
[그림 3.8] Confocal Laser Scanning Microscope 46
[그림 4.1] Strength-tension curve by surface roughness in room temperature(15~32℃), (A) 220, (B) 400 48
[그림 4.2] Strength-tension curve by surface roughness in room temperature(15~32℃), (C) 600, (D) 800 49
[그림 4.3] Strength-tension curve by surface roughness in room temperature(15~32℃), (E) 1000 50
[그림 4.4] Strength-tension curve by surface roughness in high temperature(137~142℃), (A) 220, (B) 400 51
[그림 4.5] Strength-tension curve by surface roughness in high temperature(137~142℃), (C) 600, (D) 800 52
[그림 4.6] Strength-tension curve by surface roughness in high temperature(137~142℃), (E) 1000 53
[그림 4.7] Correlation curve between testing temperature and surface roughness 55
[그림 4.8] Cross section structure of preform (X100 magnified) 57
[그림 4.9] Surface roughness (220) disconnected surface in room temperature(A), high temperature(B) 58
[그림 4.10] Surface roughness (400) disconnected surface in room temperature(A), high temperature(B) 59
[그림 4.11] Surface roughness (600) disconnected surface in room temperature(A), high temperature(B) 60
[그림 4.12] Surface roughness (800) disconnected surface in room temperature(A), high temperature(B) 61
[그림 4.13] Surface roughness (1000) disconnected surface in room temperature(A), high temperature(B) 62
[그림 4.14] Correlation curve between testing temperature and number of dimples by splice surface 64
수식 1. (제목없음) 20
수식 2. (제목없음) 24
수식 3. (제목없음) 26
수식 4. (제목없음) 26
수식 5. (제목없음) 26
수식 6. (제목없음) 27
수식 7. (제목없음) 30
수식 8. (제목없음) 33
수식 9. (제목없음) 34
수식 10. (제목없음) 34