표제지
목차
국문초록 10
I. 서론 12
II. 이론적 배경 16
II.1. Fe-Cu 합금 16
II.2. Selective Laser Melting 19
II.3. SLM의 후처리 공정 22
II.3.1. SLM 일반적인 열처리 공정 22
II.3.2. Hot Isostatic Press (HIP) 열/기계적 후처리 공정 24
III. 실험 방법 26
III.1. 고밀도 에너지 밀도 및 HIP 공정조건 설계 26
III.1.1. Fe-10Cu 합금 분말 제조 및 분석 26
III.1.2. Fe-10Cu합금 고밀도 공정조건 27
III.1.3. Fe-10Cu합금 HIP 후처리 공정조건 29
III.2. 공정 조건 별 특성 평가 방법 32
III.2.1. 미세구조 평가 32
III.2.2. 기계적 강도 및 열전도 특성 33
IV. 결과 및 고찰 34
IV.1. 미세구조 분석 및 평가 34
IV.1.1. Fe-10Cu 분말 34
IV.1.2. 면밀도 평가 36
IV.1.3. XRD 상 분석 38
IV.1.4. FE-SEM-EDS 40
IV.1.5. SEM-EBSD IPF 42
IV.2. 기계적 특성 및 열전도 특성 평가 44
IV.2.1. Vickers Hardness 44
IV.2.2. Tensile Strength 46
IV.2.3. Thermal Conductivity 48
V. 결론 50
참고문헌 52
ABSTRACT 67
〈Table 1〉 High density process condition of Fe-10Cu alloy 29
〈Table 2〉 Process condition of Hot Isostatic Press 31
〈Table 3〉 Size distribution of Fe-10Cu powder 35
〈Table 4〉 Relative density of Fe-10Cu by HIP Process 37
〈Table 5〉 XRD Rietveld phase fraction result for HIP process condition. 39
〈Table 6〉 Cu crystallite size result of HIP process condition 41
〈Table 7〉 Grain size of Fe matrix 43
〈Figure 1〉 Fe-Cu Phase diagram. 17
〈Figure 2〉 Spinodal and Binodal decomposition behavior in immiscible alloy 18
〈Figure 3〉 3D Schematic of Additive Manufactured Process Schematic of Selective Laser Melting 20
〈Figure 4〉 Schematic of Selective Laser Melting process 21
〈Figure 5〉 (a) Principle of residual stress during SLM process (b) Fracture due to residual stress 23
〈Figure 6〉 Schematic of Hot Isostatic Press 25
〈Figure 7〉 Process condition of specimen fabricated 29
〈Figure 8〉 Hot Isostatic Process Equipment 31
〈Figure 9〉 Morphology of the Fe-10Cu alloy powder for SLM (a) FE-SEM Image (b) Size Distribution. 35
〈Figure 10〉 Fe-10Cu alloy non-etching OM image (a) As-Built (b) HIP 570, (c) HIP 770, (d) HIP 970, (e) HIP 1170 37
〈Figure 11〉 XRD patterns of Fe-10Cu alloy's As-built and HIP process condition and Fe (110) plane peak analysis 39
〈Figure 12〉 Observation of Cu precipitation behavior by Fe-10Cu alloy through FE-SEM and EDS map according to the HIP process. (a)... 41
〈Figure 13〉 EBSD-IPF maps of the Fe-10Cu alloy by HIP with different process : (a) As-Built, (b) HIP 570, (c) HIP 770, (d) HIP... 43
〈Figure 14〉 Vickers Hardness of the Fe-10Cu alloy by HIP with different process 45
〈Figure 15〉 Vickers Hardness of the Fe-10Cu alloy by HIP with different process 47
〈Figure 16〉 Thermal conductivity of the Fe-10Cu alloy by HIP Proces 49