표제지
Abstract
요약
목차
제1장 서론 12
1.1. 연구의 배경 및 목적 12
1.2. 연구의 범위 및 방법 15
제2장 고강도 콘크리트와 재료에 대한 이론고찰 16
2.1. 콘크리트의 정의 16
2.1.1. 고강도 콘크리트의 개발과 정의 16
2.2. 고강도 콘크리트의 재료 18
1) 보통 포틀랜드 시멘트(Ordinary Portland Cement) 18
2) 골재의 종류 18
3) 혼화 재료 19
제3장 관련 연구고찰 23
3.1. 고강도 콘크리트의 배합 관련 연구고찰 23
3.2. 탄소배출량 관련 연구 고찰 33
3.3. 탄소배출량과 콘크리트 배합의 관계에 대한 연구고찰 36
제4장 콘크리트 배합비와 탄소배출량 60
4.1. 콘크리트 배합비와 탄소배출량 합계 60
4.1.1. 콘크리트 탄소배출량 계산 60
4.1.2. 고강도 콘크리트의 경제성과 환경성 63
제5장 결론 66
참고문헌 67
[표 1.1] 국내외 콘크리트 시장 전망 12
[표 2.1] Concrete Strength Comparison 18
[표 3.1] Ultra High Strength Concrete Experimentation Plans 23
[표 3.2] Chemical Properties of Premix Cement Composites 24
[표 3.3] Pre-Mix Cement Composition Ratio Table 24
[표 3.4] the physical properties of aggregates 25
[표 3.5] 고성능 감수제의 물리적 성질 25
[표 3.6] 변수별 배합표 및 실험결과 26
[표 3.7] Physical properties of cement 30
[표 3.8] Physical properties of aggregates 30
[표 3.9] Properties of admixtures 31
[표 3.10] Mix proportions and test results 31
[표 3.11] 배합비 35
[표 3.12] 실험계획 37
[표 3.13] 콘크리트 배합 37
[표 3.14] 실험계획 40
[표 3.15] Mix proportions of HVMA binder 41
[표 3.16] The Mix Proportions of HVMAC 42
[표 3.17] Compressive strength of HVMA mortar 42
[표 3.18] 콘크리트 생산에 대한 LCI DB 요약 49
[표 3.19] Example for CO₂ assessment of concrete(fck=24MPa) under the system boundary (cradle-to-production)[이미지참조] 50
[표 4.1] 콘크리트 중량배합표 60
[표 4.2] 각 배합재료의 kg단위당 탄소배출량 61
[표 4.3] 고강도 콘크리트 배합 탄소배출량 합계 62
[표 4.4] 모래 종류별 탄소배출량의 합계 63
[표 4.5] 초고강도 콘크리트의 1m³ 당 단가 64
[그림 1.1] 전 세계 CO2 배출량 (1900-현재) 14
[그림 1.2] 부문별 이산화탄소 배출 비중(2019년) 14
[그림 3.1] 물결합재비와 압축강도 발현특성 28
[그림 3.2] 슬럼프 플로값에 따른 압축강도 발현특성 28
[그림 3.3] 단위시멘트량에 따른 압축강도 29
[그림 3.4] 단위시멘트량과 압축강도의 상관관계 32
[그림 3.5] 강도증가에 따른 환경부하 평가결과 33
[그림 3.6] 혼화재료 혼입율별 환경부하 평가결과 34
[그림 3.7] 콘크리트의 CO₂ 배출인자 35
[그림 3.8] 바인더별 강도 및 CO₂ 배출량 36
[그림 3.9] 결합재 배합비에 따른 시멘트 강도 38
[그림 3.10] 초고강도 콘크리트의 유동성 39
[그림 3.11] 초고강도 콘크리트의 압축강도 39
[그림 3.12] Strength development ratio of HVMA mortar 43
[그림 3.13] Compressive strength of HVMAC 44
[그림 3.14] Strength development ratio compared with 50MPa 44
[그림 3.15] Modulus of elasticity and compressive strength 45
[그림 3.16] Compressive Strength of Concrete in 10℃ 46
[그림 3.17] Compressive Strength of Concrete in 30℃ 47
[그림 3.18] 콘크리트 생산 시스템 48
[그림 3.19] fck levels in the database for concrete mixtures[이미지참조] 51
[그림 3.20] SCM dosage levels in the database for concrete mixtures 51
[그림 3.21] Binder intensity (Bi) of different concrete types according to concrete compressive strength 53
[그림 3.22] CO₂ intensity (Ci) of different concrete types according to concrete compressive strength[이미지참조] 54
[그림 3.23] Regression analysis for relationship between Ci and Bi[이미지참조] 56
[그림 3.24] Regression analysis to predict compressive strength of concrete 57
[그림 3.25] Schematic procedure for low-CO2 concrete mixture using different SCMs 59
수식 1. [제목없음] 49
수식 2. [제목없음] 49
수식 3. [제목없음] 49
수식 4. [제목없음] 52
수식 5. [제목없음] 52
수식 6. [제목없음] 55
수식 7. [제목없음] 55
수식 8. [제목없음] 55
수식 9. [제목없음] 56
수식 10. [제목없음] 56
수식 11. [제목없음] 57
수식 12. [제목없음] 57
수식 13. [제목없음] 58