표제지
요약문
목차
제1장 서론 12
제1절 연구 배경 12
제2절 연구 목적 14
제2장 문헌 고찰 15
제1절 도시 고형 폐기물(MSW) 처리 현황 15
제2절 열적 처리 기술 17
1. 열분해 17
2. 가스화 19
3. 소각 22
제3장 실험 방법 24
제1절 시료 및 촉매 준비 24
제2절 시료 특성 분석 및 열중량 분석 25
1. 시료 공업분석 및 원소분석 25
2. 시료 열중량 분석 26
제3절 촉매 특성 분석 27
1. XRF (X-ray Fluorescence) 27
2. BET (Brunauer-Emmett-Teller) 27
3. XRD (X-ray diffraction) 27
4. H₂-TPR 28
제4절 실험 장치 및 실험 방법 29
1. 가스화 실험 방법 29
2. 가스화 생성물 분석 31
제4장 결과 및 고찰 33
제1절 시료 특성 분석 및 열중량 분석 33
1. 시료 공업분석 및 원소분석 33
2. 시료 열중량 분석 35
제2절 촉매 특성 분석 37
1. XRF 37
2. BET 39
3. XRD 41
4. H₂-TPR 43
제3절 고정층 가스화 45
1. 저가 촉매에 따른 공기 가스화 45
2. 온도에 따른 촉매 공기 가스화 49
3. ER에 따른 촉매 공기 가스화 52
4. 금속 담지에 따른 촉매 공기 가스화 55
제5장 결론 59
참고문헌 61
영문초록 67
Table 1. Various pyrolysis technologies 18
Table 2. Chemical reactions of biomass gasification process 20
Table 3. Advantages of different gasifying agents 21
Table 4. Summary of the existing thermochemical processes of biomass conversion. 23
Table 5. Operating conditions of catalytic air gasification 30
Table 6. Gas analysis method using GC/TCD and GC/FID 32
Table 7. Physico-chemical properties of WPC 34
Table 8. The XRF analysis of the catalyst 38
Table 9. BET surface area, pore diameter of catalysts 40
Figure 1. Domestic waste discharge status 15
Figure 2. Domestic waste disposal process 16
Figure 3. Schematic diagram of lab-scale gasification process 30
Figure 4. TG curve and DTG curve of WPC 36
Figure 5. X-Ray diffraction analysis(XRD) patterns according to (a) Ni loading (b) metal promoters on RM 42
Figure 6. H₂-temperature programmed reduction (H₂-TPR) profiles according to (a) Ni loading (b) metal promoters. 44
Figure 7. Comparison of non-catalytic and catalytic air gasification of WPC (a) Product distribution, (b) Gas composition 48
Figure 8. (a) Product distribution and (b) Gas composition obtained from air gasification of WPC at different temperature 51
Figure 9. (a) Product distribution, and (b) gas composition in WPC air gasification according to ER value 54
Figure 10. Product distribution and gas composition obtained from air gasification, using Cu, Ce and Ca promoted 10% Ni/RM catalysts 58