암석의 물리적 특성 변화에 대해 온도의 영향을 연구하기 위해 2종의 화강암류와 대리암, 사암을 전기로에서 400℃와 600℃로 가열하였다. 모든 시료에서 가열 후 물리적 특성(비중, 공극률, 흡수율, 초음파속도)과 색상 변화는 보이나, 편광현미경을 이용한 광물학적 변화는 뚜렷하지 않다. 특히 물리적 특성 변화에서 공극률과 흡수율은 증가하고, 비중과 초음파 속도는 감소하는 경향을 보이며, 온도가 증가할수록 변화폭은 크게 나타난다. 여기서 측정한 공극률은 암석의 전체 공극률을 반영하지 못하고 있으나 온도에 의한 암석의 표면 상태 변화를 반영한다. 반면 초음파 속도는 암석의 전체적인 손상 정도를 파악하는데 유용하다. 그러므로 온도에 의한 암석의 물리적 특성 변화를 설명하기 위해 공극률과 초음파 속도는 상호 비교해야 한다.Samples (two granites, marble, sandstone) were heated in an electric furnace at temperature 400℃ and 600℃ in order to investigate the change of physical properties of rocks depending on the heating temperature. Changes of Color and physical properties such as specify gravity, porosity, absorption,
p-wave velocity are visible while mineralogical changes by using polarizing microscope are not pronounced. In addition, porosity and absorption increased while specific gravity and p-wave velocity decreased at a more higher temperature (600℃). Although the open porosity does not indicate total
porosity of the rock. but p-wave velocity can be used to evaluate the degree of damage Thefefore, porosity and p-wave velocity should be compared in order to investigate the change of physical properties of rocks depending on the heating temperature.