가상기준점측위는 상시관측망으로부터 수신된 데이터를 이용하여 특정 지점에서 계통오차를 계산한 후 이에 대한 보정값을 이동점에 제공함으로써 이동점의 고정밀 3차원 측위가 가능한 측량 방법이다. 그동안 지적 분야에서는 2차원 평면에서 토지에 관련된 정보를 측량하여 지적공부에 등록·관리하고 제공하여 왔기 때문에 표고에 대한 관심이 없었으나, 최근 3차원 지적정보 구축 필요성 제기 및 지적기준점 표지를 설치한 때에는 표고를 산출하도록 관계법령에 규정됨에 따라 표고를 효율적으로 취득할 수 있는 방법에 대한 연구가 필요하게 되었다. 본 연구는 지적기준점 표고를 산출할 때 레벨측량이나 GNSS 정지측위 방법은 큰 비용과 시간이 소요되므로 실시간 이동측위 기술인 가상기준점측위를 적용하는 것이 경제적이면서도 고정확한 표고를 취득할 수 있는 방법임을 증명하는 데 그 목적이 있다.The VRS (Virtual Reference System) is a high precision surveying method that computes systematic error at the user's position using data received from GPS CORS Network and transfers the correction message to the rover. In the past cadastral section, the acquired land information by surveying at 2D plane were registered and maintained on the Cadastral Archives; therefore, the elevation height was not valuable data. However, as the need of 3D cadastral information is raised, the relevant laws and regulations now states the calculation of elevation height when installing control point mark for cadastral information is mandatory, efficient methods of acquiring elevation height have become an attractive issue. This study proves that VRS, a RTK surveying technique, is more economical and precise method of acquiring control point elevation height for cadastral surveying than leveling or GPS Static surveying, which requires significant cost and time.