본 연구의 목적은 비선형 불연속 시스템인 공간 트러스에 멀티스텝 테일러 해법을 적용하는 것과 비선형 동적 응답 및 불안정특성을 분석하는 것이다. 해석적 접근에 기초한 보다 정밀한 해는 공간 구조물의 역 문제나 또는 불안정 문제를 다루는데 매우 필요하며, 이는 지배방정식의 비선형성에 기인한다. 따라서 기하학적 비선형을 고려하여 지배 운동 방정식을 유도하였으며, 테일러 해법을 이용하여 정밀한 해석적 해를 구하였다. 해석 방법의 정밀도 검증을 위해서 단일자유도 모델을 채택하였으며, 테일러 해법을 이용한 결과를 4차 룬게-쿠타 법과 비교하였다. 또한, 스텝 하중을 받는 모델의 동적 불안정과 좌굴 특성을 고찰하였다. 두 해석 방법의 비교 결과는 매우 잘 일치하였고, 동적응답과 위상공간에서의 끌개는 스텝하중 아래에서의 동적 좌굴 현상과, 모델에 감쇠가 미치는 영향을 잘 설명할 수 있음을 보여주었다. 해석결과에서 비감쇠 시스템과 감쇠 시스템의 동적 좌굴 하중 레벨은 각각 정적 좌굴 하중 레벨의 약 77%와 83%의 범위로 나타났다.The goal of this paper is to apply the multi-step Taylor method to a space truss, a non-linear discrete dynamic system, and analyze the non-linear dynamic response and unstable behavior of the structures. The accurate solution based on an analytical approach is needed to deal with the inverse problem, or the dynamic instability of a space truss, because the governing equation has geometrical non-linearity. Therefore, the governing motion equations of the space truss were formulated by considering non-linearity, where an accurate analytical solution could be obtained using the Taylor method. To verify the accuracy of the applied method, an SDOF model was adopted, and the analysis using the Taylor method was compared with the result of the 4th order Runge-Kutta method. Moreover, the dynamic instability and buckling characteristics of the adopted model under step excitation was investigated. The result of the comparison between the two methods of analysis was well matched, and the investigation shows that the dynamic response and the attractors in the phase space can also delineate dynamic snapping under step excitation, and damping affects the displacement of the truss. The analysis shows that dynamic buckling occurs at approximately 77% and 83% of the static buckling in the undamped and damped systems, respectively.