폰 카메라용 렌즈모듈을 구성하는 각 단렌즈의 방향성을 고려한 자동 조합시스템을 개발하였다. 먼저 유동해석을 통하여 렌즈모듈의 조합성 도출 영향인자인 복굴절과 사출성형 조건의 상관성 및 조립 방향성에 따른 수율의 관계를 조사 하였다. 하나의 조립모듈에서 렌즈와 스페이서의 한 세트를 조립하도록 설계하여 생산성 향상 및 장비크기를 최소화하여 기존 장비의 약 25 %정도로 축소가 가능하였다. 또한, 기구적인 정렬기구인 센터링 기구 및 배럴가이드 적용하여 추가적인 비전시스템 없이 사이클 타임의 단축이 가능하였다. 개발한 시스템은 모듈러 설계를 통하여 픽커 및 가이드 등 일부 부품만의 교체로 생산모듈 변경에 대응 가능하도록 하여 급변하는 시장변화 및 소량생산에도 적용 가능하도록 제작되었다.An automatic combination and assembly system for phone-camera lens modules was developed. The system enables the assembly of the relative orientation of the individual lenses making up the lens module. Conventional assembly systems assemble a lens module from eight assembly units. The developed system reduces this number to half by combining each lens and a spacer into a single assembly unit. Also, the number of transfer stages for sequential assembly is minimized without increasing the assembly time. Therefore, high productivity and a footprint that is only about 25 % of that of a conventional assembly system can be realized. The system features a modular design to allow it to cope with rapid changes in the market. Only a few components, such as the picker and guide, need to be replaced for changing to a new assembly model.