[표제지 등]
제출문
요약문
Summary
표목차
그림목차
List of Figure
목차
제1장 서론 15
제2장 이론적 고찰 17
제1절 특정폐기물 발생현황 및 처리현황 17
1. 특정폐기물 발생현황 17
2. 특정폐기물 처리현황 19
제2절 유동층 소각로 21
1. 유동층의 원리 21
2. 입자의 유동특성 24
3. 보조연료 27
4. 로내 공기공급 기구 29
5. 연소특성 30
제3절 국외 유동층 소각기술 동향 32
제4절 슬러지 소각 44
1. 슬러지 소각시 적정기종 44
2. 슬러지 소각기술의 국외 현황 46
3. 하수처리장의 슬러지 소각 48
제3장 연구내용 및 결과 52
제1절 원단위 조사 52
1. 대상폐기물 발생량 52
2. 대상폐기물 분석 53
제2절 경제성 검토 59
제3절 시작품 설비의 개요 62
1. 유동층 소각로 62
2. 폐기물 공급설비 64
3. 폐열회수시설 65
4. 공해방지시설 66
5. 연돌장치 68
6. 폐수처리장치 68
제4절 시작품 설계 계산 69
1. 폐기물 조성 및 연소계산 69
2. 소각로 설계 79
3. 배출오염물질 예상농도 80
4. 폐열 보일러 (W·H·B) 82
5. 방지시설 설계사양 84
6. 세정폐수 순환 SYSTEM 95
7. 각기기별 압력강하 96
8. 닥트의 압력강하 (DUCT △P(이미지참조)) 97
9. F/D FAN 용량 산정 103
제5절 별첨 : 시작품 제작 도면 105
제4장 결론 132
참고문헌 134
위탁 연구 결과 : 유동층 소각로에서 중금속의 거동과 Agglomeration에 대한 연구 137
제출문 138
목차 140
제1장 연구목적 및 연구범위 142
제2장 폐기물별 연료특성분석 144
제1절 연구목적 144
제2절 폐기물 특성 분석항목 및 방법 144
제3절 폐기물별 연료특성 결과 146
제3장 유동층 소각공정에서 폐기물중에 함유된 중금속의 거동특성 148
제1절 연구목적 148
제2절 소각공정중 중금속의 거동특성 149
제3절 중금속 거동예측을 위한 Program package 개발 152
제4장 유동층 소각로에서의 폐기물별 소각특성 159
제1절 폐유 및 폐유 슬러지의 소각특성 159
1. 연구목적 159
2. 실험장치 및 방법 159
3. 결과 및 고찰 163
제2절 하수슬러지와 폐유의 혼합소각 특성 169
1. 연구목적 169
2. 실험장치 및 방법 169
3. 결과 및 고찰 170
제3절 염색폐수슬러지와 유연탄의 혼합소각특성 173
1. 연구목적 173
2. 실험장치 및 방법 173
3. 결과 및 고찰 173
제5장 결론 190
Nomenclature 192
참고문헌 193
위탁 연구 결과 : 유동층 소각에 의한 특정 유해폐기물 소각설비에 관한 기초연구(I) 196
제출문 197
목차 199
1. 서론 203
1-1. 연구의 필요성 203
2-2. 연구목적 및 내용 204
2. 문헌 고찰 206
3. 이론 209
4. 실험방법 217
4-1. 시료특성 217
4-2. 실험장치 217
4-3. 실험 방법 및 범위 219
5. 결과 및 고찰 222
5-1. 열중량 분석 222
1. TGA 분석(제목없음) 222
1) 슬러지 222
2) 폐오일 226
5-2. 열천칭에서 슬러지 촤의 연소 특성 229
(1) 연소속도 229
(2) 온도의 영향 232
(3) 산소 분압의 영향 236
(4) 연소 모델의 비교 239
(5) 연소반응에 대한 활성화 에너지 239
(6) 염료슬러지의 연소특성 243
6. 결론 249
REFERENCES 250
위탁 연구 결과 : 상온 유동층에서 층 물질의 운동특성에 관한 연구 252
제출문 253
목차 255
제1장 서론 261
제1절 연구개발의 필요성 261
제2절 연구개발목표 및 내용 261
제3절 당해년도 연구범위 262
제2장 문헌고찰 263
제3장 실험 273
제1절 실험장치 273
제2절 실험재료 275
제3절 실험방법 275
제4절 실험의 측정 277
제4장 결과 및 고찰 278
제1절 최소유동화속도 278
제2절 축방향 고체체유량 분포 280
제3절 Transport Disengagement Height(TDH) 285
제4절 총괄 입자비산속도 285
제5절 비산입자의 입도분포 288
제6절 입도별 비산유출속도 293
제7절 문헌의 상관식과 비교 298
제8절 상관식 301
제5장 결론 302
기호설명 303
참고 문헌 306
유동층 소각에 의한 특정유해폐기물 소각설비 및 폐열회수 기술개발 13
Table 2-1. The generation status of specified wastes in Korea ('91) 18
Table 2-2. The treatment status of specified wastes in Korea ('91) 19
Table 2-3. The Treatment status of specified wastes by disposal method in Korea ('91) 19
Table 2-4. Summary of group properties 26
Table 2-5. Summary of literature survey 33
Table 2-6. Comparision of incinerators for sludge treatment 44
Table 2-7. Heat release rate (kg/m²·H) 45
Table 2-8. The installation history of sludge incinerators in Japan 46
Table 3-1. The specified waste generation from 12 companies 52
Table 3-2. Proximate and ultimate analysis for specified wastes 55
위탁 연구 결과 : 상온 유동층에서 층 물질의 운동특성에 관한 연구 259
Table 1.1. Annual objectives and contents of research 262
Table 2.1. Correlations for entrainment rate constant K*dpoo(이미지참조) (Geldart, 1985) [in SI unit]. 265
Table 2.2. Correlations for the initial entrainment rate and the initial rising velocity of entrained particles at the bed surface [in SI unit] 268
Table 3.1. Size distribution of sand 275
유동층 소각에 의한 특정유해폐기물 소각설비 및 폐열회수 기술개발 14
Fig.2-1. Regimes of fluidized bed system 23
Fig.2-2. Powder classification diagram for fluidization with ambient air 26
Fig.2-3. Auxiliary heat required for incineration 28
Fig.2-4. The air supply system for fluidized bed incinerator 30
Fig.2-5. The combustion efficiency in fluidized bed incinerator 31
Fig.2-6. The installation history of sludge incinerators in Japan 47
위탁 연구 결과 : 상온 유동층에서 층 물질의 운동특성에 관한 연구 257
Fig.3-1. The distribution of pressure in fluidized bed incinerator 63
Fig.2-1. Concentration profiles for the shrinking core model 211
Fig.2-2. Concentration profiles for the volume reaction model 216
Fig.5-1. Thermogravimetric result of sludge type-A in N₂ atmosphere 223
Fig.5-2. Thermogravimetric result of sludge type-B in N₂ atmosphere 224
Fig.5-3. Thermogravimetric result of sludge type-A in N₂ atmosphere 225
Fig.5-4. Thermogravimetric result of oil type-A in N₂ atmosphere 227
Fig.5-5. Thermogravimetric result of oil type-B in N₂ atmosphere 228
Fig.5-6. Effect of particle size on combustion reactivity 230
Fig.5-7. Effect of gas flow rate on combustion reactivity 231
Fig.5-8. Conversion vs. time for sludge type-C (○: 450 ℃ ●: 475 ℃ ▽: 500 ℃ ▼: 550 ℃ □: 600 ℃ ■: 650 ℃ △:7 00 ℃) 233
Fig.5-9. Initial reaction rate vs. 1/T for sludge type-C 235
Fig.5-10. Conversion vs. time plot for oxygen concentration at 500 ℃ 237
Fig.5-11. The effect of oxygen concentration on the rate for sludge type-C 238
Fig.5-12. Fitting of combustiion data for sludge type-C using shrinking core model 240
Fig.5-13. Fitting of combustion data for sludge type-C using volumetric reation model 241
Fig.5-14. Rate constant vs. 1/T for sludge type-C 242
Fig.5-15. Weight loss vs. time for sludge type-A 244
Fig.5-16. EDAX analysis for sludge type-A 245
Fig.5-17. EDAX analysis for sludge type-B 246
Fig.5-18. EDAX analysis for sludge type-C 247
위탁 연구 결과 : 유동층 소각에 의한 특정 유해폐기물 소각설비에 관한 기초연구(I) 201
Figure 3.1. Schematic diagram of experimental apparatus 274
Figure 4.1. Fluidizing velocity versus bed pressure drop. 279
Figure 4.2. Static bed height versus bed weight 279
Figure 4.3. Pressure gradient along the height above the distributor plate with a primary gas input only. 281
Figure 4.4. Pressure gradient along the height above the distributor plate with second gas input 282
Figure 4.5. Axial solid holdup profiles in the fluidized bed with primary gas input only. 283
Figure 4.6. Axial solid holdup profiles in the fluidized bed with second gas input. 284
Figure 4.7. Fluidizing velocity versus TDH within the experimental range. 286
Figure 4.8. Total entrainment rate versus fluidizing velocity with a primary gas input only. 287
Figure 4.9. Total entrainment rate versus fraction of second gas input. 289
Figure 4.10. Size distribution of entrained particles with a primary gas input only. 290
Figure 4.11. Size distribution of entrained particles with second gas input. 292
Figure 4.12. Entrainment rate constant versus fluidizing velocity with a primary gas input only. 294
Figure 4.13. Entrainment rate constant versus fluidizing velocity with a primary gas input only. 295
Figure 4.14. Entrainment rate constant versus fraction of second gas input. 296
Figure 4.15. Entrainment rate constant versus fraction of second gas input. 297
Figure 4.16. Comparison between measured entrainment rate constants and calculated values by various correlations. 299
Figure 4.17. Comparison between measured entrainment rate constants and calculated values by various correlations. 300