[표제지 등]
제출문
칼라
목차
제1장 탄화규소 세라믹의 사출 성형 6
목차 7
제1절 개요 9
제2절 이론적 배경 11
1. 결합제의 선정 11
2. 혼합 12
3. 사출 13
4. 탈지공정 15
제3절 실험 방법 18
1. 출발원료특성 및 혼합물의 조성 18
2. 사출체의 제조 18
3. 탈지공정 19
제4절 결과 및 고찰 20
1. 혼합조건 20
2. 사출조건 21
3. 탈지조건 23
제5절 결론 26
연구실적 51
참고문헌 53
제2장 탄화규소 소결에 관한 연구 55
목차 56
제1절 개요 58
제2절 이론적 배경 60
1. 탄화규소에 관한 연구 60
2. 파괴 인성 증진기구 66
제3절 실험 방법 67
1. 사용분말의 특성 및 혼합과 성형 67
2. 소결 68
3. 소결체의 밀도 측정 68
4. 미세구조의 관찰 및 상분석 69
5. 기계적 성질 측정 69
제4절 실험결과 및 고찰 72
1. 소결밀도와 무게감량 72
2. 액상의 동정 73
3. 성형 방법에 따른 소결 거동 74
4. 기계적 성질 77
제5절 결론 80
연구실적 107
참고문헌 109
제3장 세라믹/금속 복합체의 설계 117
목차 118
제1절 개요 120
제2절 이론적 배경 123
1. 세라믹-금속 접합 123
2. 세라믹의 연삭 가공 124
3. 세라믹 총렬 라이너 구조 129
제3절 실험 방법 131
1. 세라믹-금속 브레이징 조인트의 고온 굽힘 강도 평가 131
2. 세라믹 총렬 라이너 구조의 설계 133
제4절 결과 및 고찰 139
1. 세라믹-금속 브레이징 조인트의 고온 접합 강도 평가 139
2. 세라믹 총렬 라이너 구조의 설계 141
제5절 결론 146
연구실적 170
참고문헌 172
초록(국문) 176
[title page etc.]
[Contents]
제1장 탄화규소 세라믹의 사출 성형(제목없음)
Section 1. Introduction 9
Section 2. Literature survey 11
1. Selection of binder system 11
2. Mixing 12
3. Injection molding 13
4. Debinding process 15
Section 3. Experimental procedure 18
1. Characteristics of starting materials and Composition of mixture 18
2. Preparing of injected body 18
3. Debinding process 19
Section 4. Results and discussion 20
1. Determination of mixing condition 20
2. Determination of infection molding condition 21
3. Determination of debinding condition 23
Section 5. Conclusion 26
Research(Reserch) activities 51
Reference 53
제2장 탄화규소 소결에 관한 연구(제목없음) 55
Section 1. Introduction 58
Section 2. Literature survey 60
1. Research on SiC 60
2. Toughening mechanism 66
Section 3. Experimental procedure 67
1. Characteristics, mixing, and compaction of starting powder 67
2. Sintering 68
3. Measurement of the density of sintered SiC 68
4. Microstructure and phase analysis of sintered SiC 69
5. Measurement of mechanical properties 69
Section 4. Results and discussion 72
1. Relative density and weight loss of sintered SiC 72
2. Analysis of liquid phase 73
3. Sintering behavior with forming methods 74
4. Mechanical properties 77
Section 5. Conclusion 80
Research(Reserch) activities 107
Reference 109
제3장 세라믹/금속 복합체의 설계(제목없음) 117
Section 1. Introduction 120
Section 2. Literature survey 123
1. Ceramic-metal joining 123
2. Grinding machining of ceramic 124
3. Structure for ceramic liner of gun barrel 129
Section 3. Experimental procedure 131
1. High temperature flexural strength of ceramic-metal brazing joints 131
2. Analysis and design of structure for ceramic liner of gun barrel 133
Section 4. Results and discussion 139
1. High temperature flexural strength of ceramic-metal brazing joints 139
2. Analysis and design of structure for ceramic liner of gun barrel 141
Section 5. Conclusion 146
Research(Reserch) activities 170
Reference 172