표제지
목차
Abstract 5
Ⅰ. 서론 6
Ⅱ. 연구내용 및 방법 8
1. 질소산화물(NOx) 저감 문헌조사 8
2. 약액세정 폐수 발생 공정 및 특성 조사 8
가. 약액세정 폐수 발생공정 8
나. 약액세정 폐수 특성 분석 10
3. 생활폐기물 소각시설을 이용한 소각처리 실증실험 10
가. 실증실험 대상시설 주요공정 10
나. 실증실험 조건 설정 12
다. 약액세정 폐수 분사 처리 시 환경성평가 14
4. 약액세정 폐수의 투입에 따른 소각시설의 영향검토 15
Ⅲ. 연구 결과 및 고찰 16
1. 문헌조사 결과 16
가. 질소산화물(NOx)의 종류 및 생성 메카니즘 16
나. 질소산화물(NOx) 저감기술 17
다. SNCR 공정에서의 질소산화물(NOx) 저감 메카니즘 18
라. SNCR 공정에서의 질소산화물 제거 영향인자 20
마. 약액세정 공정에서의 악취물질 반응 22
2. 약액세정 폐수의 특성 분석결과 22
3. 생활폐기물 소각시설 실증실험 결과 27
가. 연소가스 및 일반대기오염물질 분석결과 27
4. 약액세정 폐수의 투입에 따른 영향검토 결과 30
가. 연소실 내 온도변화 30
나. 약액세정 투입에 따른 질소산화물(NOx) 농도변화 31
5. 약액세정폐수의 투입에 따른 재활용 인정에 대한 법적 근거 검토 32
Ⅳ. 결론 34
참고문헌 35
〈Table 1〉 Major suppliers of chemical cleaning wastewater treatment process 8
〈Table 2〉 Chemical cleaning wastewater neutralization experimental conditions 10
〈Table 3〉 Detailed information about major equipment 11
〈Table 4〉 Input condition of chemical cleaning wastewater and urea 12
〈Table 5〉 Spray nozzle specifications 13
〈Table 6〉 Nitrogen oxide type and characteristics 16
〈Table 7〉 Commercialization of technologies for NOx reduction 17
〈Table 8〉 Analysis results of the chemical cleaning wastewater neutralization 23
〈Table 9〉 Turbidity analysis results of neutralization treatment 24
〈Table 10〉 Analysis results of the chemical cleaning wastewater(combustion test) 25
〈Table 11〉 Measurement results of air pollutants in flue gas 27
〈Table 12〉 Measurement results of Dioxin 28
〈Table 13〉 Loss on lgnition analysis results of residues 29
〈Table 14〉 Analysis of temperature distribution according to the various injection conditions 30
〈Table 15〉 Characteristics analysis of NOx emission quantity and reduced efficiency 31
〈Figure 1〉 Solidification process(1step) and Waste generation process 9
〈Figure 2〉 Fuel drying process(2step) and Waste generation process 9
〈Figure 3〉 Domestic waste incineration facilities process 11
〈Figure 4〉 Sampling point of plant A 12
〈Figure 5〉 Chemical cleaning wastewater injection point 13
〈Figure 6〉 Field supply picture of chemical cleaning wastewater 13
〈Figure 7〉 Measuring photo of air pollution and dust, combustion gas 14
〈Figure 8〉 Formation mechanism of thermal NOx, prompt NOx, fuel NOx 16
〈Figure 9〉 Reaction mechanism of Thermal De-NOx 19
〈Figure 10〉 Urea solution mechanisms in high-temperature exhaust gas 20
〈Figure 11〉 Loss on lgnition content of residues 29
〈Figure 12〉 The secondary combustion chamber temperature distribution according to the various injection conditions 30
〈Figure 13〉 NOx reduction efficiency according to NH₃/NOx molar ratio(Gas flow rate : (a) urea 30,240㎥/hr, (b) chemical cleaning wastewater 30,595㎥/hr) 32