권호기사보기
기사명 | 저자명 | 페이지 | 원문 | 기사목차 |
---|
대표형(전거형, Authority) | 생물정보 | 이형(異形, Variant) | 소속 | 직위 | 직업 | 활동분야 | 주기 | 서지 | |
---|---|---|---|---|---|---|---|---|---|
연구/단체명을 입력해주세요. |
|
|
|
|
|
* 주제를 선택하시면 검색 상세로 이동합니다.
In this study, we prepared polyurethane rigid foams through a one-shot process, using 100 parts of polyols (PEG:glycerol:starch=9:1:10 in the weight ratio), 60 to 100 parts of 2,4-TDI as an isocyanate, and 1 to 20 parts of water as a blowing agent. The foams had open-cell structure, whose cell size was approximately 0.5-1 mm and the thickness of the cell wall decreased with increasing water content. The apparent densities also decreased with increasing water content, 0.232-0.141 g/cm3 in TS5-60, 0.233-0.074 g/cm3 in TS5-80, and 0.265-0.085 g/cm3 in TS5-100, respectively. To confirm the reactions between isocyanate groups of 2,4-TDI and hydroxyl groups of polyols (PEG, glycerol, and starch) or water, FT-IR spectroscopic analysis and a solubility test in DMF were performed. The thermal property of the foams was investigated using DSC. From the results of the impact test, the impact resistance of the foams showed a maximum of 48.092 J/m at TS5-60-6, 70.951 J/m at TS5-80-8, and 88.062 J/m at TS5-100-8, respectively. From the compression test, the compressive stress showed a maximum of 402.5 KPa at TS5-60-6, 621.3 KPa at TS5-80-6, and 604.9 KPa at TS5-100-8. And the compressive elastic modulus showed a maximum of 14.94 MPa at TS5-60-6, 15.72 MPa at TS5-80-7, 16.52 MPa at TS5-100-8, respectively.
기사명 | 저자명 | 페이지 | 원문 | 목차 |
---|---|---|---|---|
폴리프로필렌 스플리트사의 제조와 이를 이용해 제조한 제직포의 인장특성에 관한 연구 | 박태영 ;정용식 | pp.305-311 |
|
|
Quad 분석법을 이용한 스포츠웨어 소재의 촉감 평가법 개발 | 김주용 | pp.312-316 |
|
|
정신물리학적 방법을 이용한 스포츠 웨어용 직물의 흡한 속건성 평가 | 김주용 ;구지은 | pp.317-321 |
|
|
양모의 헤나 염색에 관한 연구 | 박정은 ;오경화 | pp.322-327 |
|
|
지용성 오염과 반복세탁에 따른 극세섬유 직물의 역학적 특성 변화와 흡수성에 관한 연구 | 오경화 ;윤재희 | pp.328-334 |
|
|
BTCA에 의한 실크/라미 교직물의 DP 가공 :FT-IR 및 HPLC에 의한 에스테르 가교 평가 | 조석현 ;김 용 ;박종준 ;이문철 | pp.335-341 |
|
|
키토산 고분자의 용액 물성 ,Ⅰ :초산수용액에서 온도와 경과시간에 따른 점도 변화 | 김홍성 ;이순장 | pp.342-346 |
|
|
성형 전 용액상태에서 요드화된 폴리비닐알코올 필름의 연신 및 요드 제거에 관한 연구 | 손현식 ;신은주 ;이양헌 | pp.347-357 |
|
|
플러렌 변성 폴리스티렌의 물성에 관한 연구 | 이 석 ;김환기 ;김건형 ;김정안 ;강호종 | pp.358-364 |
|
|
폴리올의 주성분으로 전분을 이용하여 제조된 폴리우레탄 경질 발포체의 구조 및 기계적 특성에 대한 연구 | 김대현 ;양성률 ;권오진 ;박종신 | pp.365-377 |
|
|
플라스틱 보드 드레인의 배수성능 변화 | 서문호 ;김형섭 ;김동환 | pp.378-385 |
|
번호 | 참고문헌 | 국회도서관 소장유무 |
---|---|---|
1 | (1996) Blocked Isocyanate: Reaction and Thermal Behavior of the Toluene 2,4-Diisocyanate Dimer, | 미소장 |
2 | (2000) Waterborne Anionic Polyurethanes and Poly(urethane-urea)s: Influence of the Chain Extender on Mechanical and Adhesive Properties, | 미소장 |
3 | (2002) On the Study of Polyurethane Ionomer- Part I, | 미소장 |
4 | (1995) Mechanical Properties of Polyurethane-Unsaturated Polyester Interpenetrating Polymer Networks, | 미소장 |
5 | (1996) Urethane/Acrylic Composite Polymer Emulsions, | 미소장 |
6 | (1999) Synthesis and Characterization of Polymers from Cashewnut Shell Liquid(CNSL), a Renewable Resource II. Synthesis of Polyurethanes, | 미소장 |
7 | (2002) Synthesis of Polyols by Anionic Polymerization Determination of Kinetic Parameters of Propylene Oxide Polymerization Using Calcium and Potassium Alcoholates, | 미소장 |
8 | (2001) Preparation of Polyether Triol and Three-Armed Polyether Triol by Tetrahydrofuran Polymerization Initiated with Heteropolyacid, | 미소장 |
9 | (1999) Effects of Molecular Weight of Nitrocellulose on Structure and Properties of Polyurethane/Nitrocellulose IPNs, | 미소장 |
10 | (2001) Semi-interpenetrating Polymer Networks from Castor Oil-based Polyurethane and Nitrokonjac Glucomannan, | 미소장 |
11 | (2003) Effect of Different Isocyanates on the Properties of Soy-Based Polyurethanes, | 미소장 |
12 | (1997) Thermal and Mechanical Properties of Polyurethanes Derived from Mono- and Disaccharides, | 미소장 |
13 | (1998) Synthesis of a Novel Starch-Derived AB-type Polyurethane, | 미소장 |
14 | (2001) Preparation of Polymer Composites on the Base of Polyurethanes and Natural Polysaccharides, | 미소장 |
15 | (1998) Properties and Interfacial Bonding of Regenerated Cellulose Films Coated with Polyurethane-Chitosan IPN Coating, | 미소장 |
16 | (1996) Water-Absorbing Polyurethane Foams from Liquefied Starch, | 미소장 |
17 | (2001) New Segmented Poly(ester-urethane)s from Renewable Resources, | 미소장 |
18 | (2002) Characteristics of Polyurethanes Incorporating Starch Granules, | 미소장 |
19 | (1969-19751991) Copolymerization of Turkish Tall Oil Specimens with Indene-Coumarone - Production and Properties of Indene-Coumarone Modified Tall Oil Varnishes, | 미소장 |
20 | (1998) Edible Films Made from Hydroxypropyl Starch and Gelatin and Plasticized by Polyols and Water, | 미소장 |
21 | (1998) Biodegradable Films Made from Low-density Polyethylene Rice Starch and Potato Starch for Food Packaging Applications, | 미소장 |
22 | (1994) Influence of Extrusion Conditions on Extrusion Speed and Pressure in the Extruder and on Paste Quality, | 미소장 |
23 | (1992) Hydrothermal Modification of Starches The Difference between Annealing and Heat/Moisture-Treatment, | 미소장 |
*표시는 필수 입력사항입니다.
*전화번호 | ※ '-' 없이 휴대폰번호를 입력하세요 |
---|
기사명 | 저자명 | 페이지 | 원문 | 기사목차 |
---|
번호 | 발행일자 | 권호명 | 제본정보 | 자료실 | 원문 | 신청 페이지 |
---|
도서위치안내: 정기간행물실(524호) / 서가번호: 국내13
2021년 이전 정기간행물은 온라인 신청(원문 구축 자료는 원문 이용)
우편복사 목록담기를 완료하였습니다.
*표시는 필수 입력사항입니다.
저장 되었습니다.