본문 바로가기 주메뉴 바로가기
국회도서관 홈으로 정보검색 소장정보 검색

결과 내 검색

동의어 포함

초록보기



Light Oil Flow Standard System(LOFSS), as a national oil flow standard system, in Korea Research Institute of Standards and Science(KRISS) was developed for oil flowmeter calibration, and the expanded uncertainty of flow quantity determination was estimated within 0.04 % . In order to improve the reliability of the LOFSS measurement, a proficiency test was carried out in the flow range of 20 and 240 (Reynolds number 20,000~900,000). A turbine flowmeter was used as a transfer package in round robin test. The water flow standard system of KRISS, the pipe prover of the national calibration and test organization and the master meter calibrator of the turbine flowmeter supplier, which used the different working fluid respectively, were compared with the turbine flowmeter measurement. The maximum difference of measurement was 0.15 % between the LOFSS and the pipe prover. The En numbers of the each system measurement were evaluated at the same Reynolds number. It was found that the En numbers were less than 1 in the comparison, which means the procedures of the uncertainty estimation of the each calibrators were reasonable and reliable.

권호기사

권호기사 목록 테이블로 기사명, 저자명, 페이지, 원문, 기사목차 순으로 되어있습니다.
기사명 저자명 페이지 원문 목차
플랩이 있는 공동 부근에서의 유동특성 해석 송호성 ; 박준홍 ; 송시몬 pp.645-651

소형 가압형 연료전지/가스터빈 하이브리드 시스템의 성능 비교해석 박성구 ; 유병준 ; 김동섭 ; 손정락 ; 안국영 pp.652-658

둔체를 갖는 연소기에서 자려 연소 진동에 관한 수치해석 김현준 ; 홍정구 ; 김대희 ; 신현동 pp.659-668

이성분 나노유체(NH₃/H₂O + 나노입자)의 열전달 및 흡수성능 촉진실험 이진기 ; 정정우 ; 강용태 pp.669-675

용접형 판형열교환기의 열전달 및 압력강하특성에 관한 수치해석 정종윤 ; 남상철 ; 강용태 pp.676-682

고분자전해질형연료전지의 가스 채널 최적화를 위한 수치적연구. 1 : 가스 채널 치수가 전류밀도와 HFR 분포에 미치는 영향성 주현철 pp.683-694

종횡비에 따른 납작관-평판휜 형상의 밀집형 열교환기 내 공기 측 대류열전달특성에 대한 수치해석 모정하 pp.695-703

플랜트의 구성을 고려한 IGCC용 가스터빈의 성능해석 김영식 ; 이종준 ; 김동섭 ; 손정락 ; 주용진 pp.704-711

경질유 유량표준장치의 신뢰도 검증을 위한 측정정확도 비교 임기원 pp.712-719

관 내 과도 난류유동에 대한 대형와 모사 정서윤 ; 정용만 pp.720-727

참고문헌 (14건) : 자료제공( 네이버학술정보 )

참고문헌 목록에 대한 테이블로 번호, 참고문헌, 국회도서관 소장유무로 구성되어 있습니다.
번호 참고문헌 국회도서관 소장유무
1 Ki Won Lim, (2003) A Study on the Development and the Uncertainty Analysis of Oil Flow Standard System, J. of KSME (B) 미소장
2 ISO, (1993) Guide to The Expression of Uncertainty in Measurement(1st edition), ISO 미소장
3 Ki Won Lim, (2006) Flow Range Extension of Light Oil Flowmeter Standard System with Build-Up Technique, J. of KSME (B) 미소장
4 Furuichi N, (2007) A Specification and Uncertainty Evaluation of a High Reynolds Number Calibration Facility, FLOMEKO 2007 미소장
5 Shimada T, (2003) New Primary Standard for Hydrocarbon Flowmeters at NMIJ – International Comparison between NMIJ and SP, FLOMEKO 2003 미소장
6 Sam Yong Woo, (2006) Maintenance and Improvement of Mechanical Measurement Standards, KRISS 미소장
7 ISO, (1980) Measurement of Liquid Flow in Closed Conduits-Weighing Methods, 미소장
8 Engel R, (2007) Model-based Fluid Diverter Analysis for Improved Uncertainty Determination in Liquid Flow Calibration Facilities, Exemplified with PTB`s Hydrodynamic Test Field, FLOMEKO 2007 미소장
9 Kwang-Bock Lee, (2002) Calibration Procedure of Water Flow Standard System, KRISS 미소장
10 Ruis V, (2000) Uncertainty Analysis in Piston Prover Calibration, FLOMEKO 2000 미소장
11 API, (1978) Manual of Petroleum Measurement Standards, Chapter 4. Proving System(1st edition), API 미소장
12 JFI standard 1001, (1975) Meter Accuracy Tests for Liquid Flowmeter-Positive Displacement Flowmeters, Japan Flow Meter Industry Association 미소장
13 Miller R. W, (1996) Flow Measurement Engineer -ing Handbook(Third edition), McGraw-Hill 미소장
14 Kaykisizli H, (2003) Principle of Converting the Mechanical Movement to Electrical Signal by Turbine Meters, FLOMEKO 2003 미소장