본문 바로가기 주메뉴 바로가기
국회도서관 홈으로 정보검색 소장정보 검색

결과 내 검색

동의어 포함

초록보기

Reaction bonded silicon carbide(RBSC) composite for heat-exchanger was fabricated by molten Si infiltration method. The raw

materials with variable particle sizes were used in this experience. The finer the particle size in sintered silicon carbide was the more

increasing 3-point bending strength and fracture toughness. As the adaptable particle sizes had been occupied interstice arising from

packing sample, the mechanical properties were increased. In the PCS1-1 sample, the 3-point bending strength and fracture toughness

were 323MPa and 4.9MPa톗1/2, respectively.

권호기사

권호기사 목록 테이블로 기사명, 저자명, 페이지, 원문, 기사목차 순으로 되어있습니다.
기사명 저자명 페이지 원문 목차
Optimizing electrical and mechanical properties of reaction-sintered SiC by using different-sized SiC particles in preform Young-Sam Jeon ;Hyunho Shin ;Jin-Soo Park ;Sang-Won Kang pp.439-442

해포석이 시멘트 경화체의 특성에 미치는 영향 강현주 ;송명신 ;김영식 pp.443-452

Cr-doped Y₂O₃-Al₂O₃계 붉은 안료의 합성과 적용 신경현 ;이병하 pp.453-458

P₂O₅SnO₂계 유리에서 P₂O₅를 B₂O₃로 치환첨가 시 구조와 물성에 미치는 영향 최병현 ;지미정 ;안용태 ;고영수 ;이영훈 pp.459-463

열전지용 용융염 전해질의 유리필터분리판의 담지특성 조광연 ;류도형 ;허승헌 ;신동근 ;김현이 ;정해원 ;조성백 pp.464-471

고분자전해질 연료전지용 바이폴라 플레이트의 다층 코팅의 증착 윤영훈 ;정훈택 ;차인수 ;최정식 ;김동묵 ;정진호 pp.472-476

SrAl₂O₄계 축광재료의 습식공정에 의한 나노분말 합성 및 발광특성 김정식 pp.477-481

탄소나노섬유/코발트산화물 복합전극의 케폐시턴스 특성 윤여일 ;고장면 pp.482-485

용융 Si 침윤법에 의해 제조된 반응소결 탄화규소 복합체에서 SiC 입자 크기의 영향 윤성호 ;조경선 ;Phung Nhut Tan ;정 훈 ;김영도 ;박상환 pp.486-492

코발트망간 산화물/탄소나노섬유 복합전극의 수퍼케폐시터 특성 김용일 ;윤여일 ;고장면 pp.493-496

참고문헌 (14건) : 자료제공( 네이버학술정보 )

참고문헌 목록에 대한 테이블로 번호, 참고문헌, 국회도서관 소장유무로 구성되어 있습니다.
번호 참고문헌 국회도서관 소장유무
1 P. Popper, (1960) The Preparation of Dense Self-bonded Silicon Carbide, Speci. Ceram. 미소장
2 C. W. Forrest, (1972) The Fabrication and Properties of Self-Bonded Silicon Carbide Bodies, Speci. Ceram. British Ceram. Res. Asso 미소장
3 J. B. Wachtman Jr., (1972) Structural Ceramics, Academic Press Inc. 미소장
4 J. N. Ness , (1986) Microstructural Characterization of Reaction-Bonded Silicon Carbide, J. Mater. Sci 미소장
5 R. Naslain , (1990) Fundamental and Practical Aspects of the Chemical Vapor Infiltration of Porous Substrates, Carbon 미소장
6 Vapor-Phase Fabrication and Properties of Continuous-Filament Ceramic Composites 네이버 미소장
7 R. Naslain, (1999) Micro/minicomposites a Useful Approach to the Design and Development of Nonoxide CMCs, Composites 미소장
8 Fabrication and pressure testing of a gas-turbine component manufactured by a preceramic-polymer-impregnation method 네이버 미소장
9 S. M. Dong, (2002) Microstructural Evolution and Mechanical Performances of SiC/SiC Composites by Polymer Impregnation/ Microwave Pyrolysis (PIMP) Process, Ceram. Int 미소장
10 Development of a reaction-sintered silicon carbide matrix composite 네이버 미소장
11 Microstructure and Bending Properties of SiC/SiC Composites Fabricated by Reaction Sintering Process 네이버 미소장
12 Processing optimization and mechanical evaluation of hot pressed 2D Tyranno-SA/SiC composites 네이버 미소장
13 Preparation of SiC/SiC Composites by Hot Pressing, Using Tyranno‐SA Fiber as Reinforcement 네이버 미소장
14 S.P. Lee, (2003) Fabrication and Mechanical Properties of Oriented SiC Short-Fiber-Reinforced SiC Composites by Tape Casting, Mater. Sci. Eng 미소장