본문 바로가기 주메뉴 바로가기
국회도서관 홈으로 정보검색 소장정보 검색

결과 내 검색

동의어 포함

초록보기

In this paper, experimental studies of the regrinding of tungsten carbide (WC-Co) tools for high-speed machining were conducted. Regrinding and a subsequent evaluation test were carried out for a flat endmill tool with diameters of 10mm and 3mm using a CNC five-axis tool grinder and a CNC three-axis machining center. Tool wear on the two types of endmill tools increased as the cutting length increased, and the tool wear was not influenced by the regrinding state. In case of the micro endmill with a tool diameter of 3mm, the effective regrinding time was determined for a flank wear threshold of 0.3mm considering the tool life according to cutting length. The tool lives of the 10mm and 3mm endmill tools were increased by 80% and 72%, respectively. This conclusion proves the Feasibility of the recycling of tungsten carbide materials in the high-speed machining of high-hardened materials for industrial applications.

권호기사

권호기사 목록 테이블로 기사명, 저자명, 페이지, 원문, 기사목차 순으로 되어있습니다.
기사명 저자명 페이지 원문 목차
초경소재 재활용을 위한 플랫 엔드밀공구의 재연삭 효과 강명창 ;김민욱 ;권동희 ;박인덕 ;정영근 pp.635-639

Enhanced UV-light emission in ZnO/ZnS quantum dot nanocrystals Ki-Eun Kim ;Woong Kim ;Yun-Mo Sung pp.640-644

원자로급 흑연 IG-11 산화율에 따른 기공도와 열방사율과의 관계 서승국 ;노재승 ;김경화 ;지세환 ;김응선 pp.645-649

가스 하이드레이트 형성 원리를 이용한 연소전 탈탄소화 연구 이현주 ;이주동 ;김양도 pp.650-654

산화아연-탄소나노튜브 복합체의 일산화질소 가스 감지 특성 박성용 ;정훈철 ;안은성 ;웬래훙 ;강영진 ;김효진 ;김도진 pp.655-659

하이드라진을 이용한 용액환원법에 의한 Ni-GDC 미분말 합성과 전기적 특성 김선중 ;김강민 ;조평석 ;조윤호 ;이충용 ;박승영 ;강윤찬 ;이종흔 pp.660-663

Oxide 표면에 Self-Assemble Monolayers를 이용한 전도성 고분자 Poly(3-hexylthiophene)(P3HT) 증착 및 Patterning 연구 팽일선 ;김현호 ;김성수 ;이재갑 pp.664-668

Glucose oxidase-coated ZnO nanowires for glucose sensor applications Kyung-Min Noh ;Yun-Mo Sung pp.669-672

Density Functional Theory를 이용한 CaO 안정화 Cubic-HfO₂의 산소 공공 구조 연구 김종훈 ;김대희 ;이병언 ;황진하 ;김영철 pp.673-677

Bi₂O₃-B₂O₃-BaO-ZnO계 투명유전체와 Ag 전극의 반응 안용태 ;최병현 ;김형순 pp.678-682

카본블랙을 이용한 인체감전용 전도성 도료의 개발 강계명 pp.683-688

참고문헌 (13건) : 자료제공( 네이버학술정보 )

참고문헌 목록에 대한 테이블로 번호, 참고문헌, 국회도서관 소장유무로 구성되어 있습니다.
번호 참고문헌 국회도서관 소장유무
1 D. H. Kwon, M. C. Kang, J. S. Kim, J. T. Ok and K. H. Kim, Surf. Coat. Technol., 200, 1933 (2005). 미소장
2 J. Tlusty and S. Smith, J. of Manuf. S. Eng. ASME, 119, 664 (1997). 미소장
3 W. Y. Bao and I. N. Tansel, Int. J. Mach. Tools Manuf., 40, 2155 (2002). 미소장
4 J. S. Kim, G. J. Kim, M. C. Kang, J. W. Kim and K. H. Kim , Surf. Coat. Technol., 193, 249 (2005). 미소장
5 M. C. Kang, J. S. Kim and K. H. Kim, Surf. Coat. Technol., 200, 1939 (2005). 미소장
6 N. Cook, J. of Eng. Ind. Trans. ASME, 95, 931(1995). 미소장
7 G. H. Ha, S. H. Hong and B. K. Kim, J. Korea Powder Metall. Inst., 6, 365-373 (2003). 미소장
8 M. Nouari and A. Ginting, Surf. Coat. Technol., 200, 5663 (2006). 미소장
9 S. PalDey and S. C. Dee vi, Mater. Sci. Eng., A, 342, 58 (2003). 미소장
10 D. K. Ahn, H. C. Kim and S. H. Lee, J. Mech. Sci. Technol., 19, 144 (2005). 미소장
11 V. Belido-Gonzalez, N. Stefanopoulos and F. Deguilhen, Surf. Coat. Technol., 74-75, 884(1995). 미소장
12 G. E. D’Errico, E. Guglielmi and G. Rutelli, J. Vac. Sci. Technol, A21(4), 251 (1999). 미소장
13 T. Moriwaki, CIRP, 41, 637 (1992). 미소장