권호기사보기
| 기사명 | 저자명 | 페이지 | 원문 | 기사목차 |
|---|
결과 내 검색
동의어 포함
The unique features of spark plasma sintering process are the possibilities of a very fast heating
rate and a short holding time to obtain fully dense materials. β-SiC powder with 0, 2, 6, 10 wt% of α-SiC
particles (seeds) and 4 wt% of Al-B-C (sintering aids) were spark plasma sintered at 1700-1850oC for 10
min. The heating rate, applied pressure and sintering atmosphere were kept at 100oC/min, 40 MPa and a
flowing Ar gas (500 CC/min). Microstructural development of SiC as function of seed content and temperature
during spark plasma sintering was investigated quantitatively and statistically using image analysis.
Quantitative image analyses on the sintered SiC ceramics were conducted on the grain size, aspect ratio and
grain size distribution of SiC. The microstructure of SiC sintered up to 1700oC consisted of equiaxed grains.
In contrast, the growth of large elongated SiC grains in small matrix grains was shown in sintered bodies at
1750oC and the plate-like grains interlocking microstructure had been developed by increasing sintering temperature.
The introduction of α-SiC seeds into β-SiC accelerated the grain growth of elongated grains during
sintering, resulting in the plate-like grains interlocking microstructure. In the α-SiC seeds added in β-SiC,
the rate of grain growth decreased with α-SiC seed content, however, bulk density and aspect ratio of grains
in sintered body increased.| 번호 | 참고문헌 | 국회도서관 소장유무 |
|---|---|---|
| 1 | L. J. Schioler: Am. Ceram. Soc. Bull., 64 (l986) 268. | 미소장 |
| 2 | K. Yamada and M. Mohri: Silicon-Carbide Ceramics,S. Somiya and Y. Inomata (Ed.), Uchida Rokakuho Publishing Ltd., (1988) 9. | 미소장 |
| 3 | M. Srinivasam: Structural Ceramics, J. B. Wachtmann.Jr (Ed.), Academic Press, (1989). | 미소장 |
| 4 | W. L. Vaushn and H. G. Maahs: J. Am. Ceram. Soc.,73 (l990) 1540. | 미소장 |
| 5 | S. Prochazka: Ceramics for High Performance Applications,Burke, Gorum and Katz (Ed.), Brook Hill(1974) 239. | 미소장 |
| 6 | W. Bocker and H. Hausner: Powder Metal. Inter., 10(1976) 87. | 미소장 |
| 7 | D. H. Stutz, S. Prochazka and J. Lorenz: J. Am. Ceram.Soc., 68 (1985) 479. | 미소장 |
| 8 | A. H. Heuer, G. A. Fryburg, L. U. Ogbuji and T. E.Mitchell: J. Am. Ceram. Soc., 61 (1978) 406. | 미소장 |
| 9 | L. U. Ogbuji, T. E. Mitchell and A. H. Heuer: J. Am.Ceram. Soc., 64 (1981) 91. | 미소장 |
| 10 | M. Omori and H. Takei: J. Am. Ceram. Soc., 65(1982) C92. | 미소장 |
| 11 | M. A. Mulla and V. D. Kristic: Acta Metall. Mater., 42(1994) 303. | 미소장 |
| 12 | M. A. Mulla and V. D. Kristic: Am. Ceram. Soc. Bull.,70 (1991) 439. | 미소장 |
| 13 | N. P. Padture: J. Am. Ceram. Soc., 77 (1994) 519. | 미소장 |
| 14 | S. H. Kim, Y.-W. Kim and M. Mitomo: J. Mater. Sci.,38 (2003) 1117. | 미소장 |
| 15 | N. P. Padture and B. R. Lawn: J. Am. Ceram. Soc., 77(1994) 2518. | 미소장 |
| 16 | Y. W. Kim, K. S. Cho and J. G. Lee: Kor. J. Ceram., 2(1996) 39. | 미소장 |
| 17 | Y. W. Kim, M. Mitomo and H. Hirotsuru: J. Am.Ceram. Soc., 80 (1997) 99. | 미소장 |
| 18 | R. M. Williams, B. N. Juterbock, S. S. Shinozaki, C.R. Peters and T.J. Whalen: Am. Ceram. Soc. Bull., 64(1985) 1385. | 미소장 |
| 19 | B.-W. Lin, M. Imai, T. Yano and T. Iseki: J. Am.Ceram. Soc., 69 (1986) C67. | 미소장 |
| 20 | S. Shinozaki, R. M. Williams, B. N. Juterbock, W. T.Donlon, J. Hangas and C. R. Peters: J. Am. Ceram.Soc., 64 (l985) l389. | 미소장 |
| 21 | J. J. Cao, W. J. Moherlychan, L. C. De Jonghe, C. J.Gilbert and R. O. Ritchie: J. Am. Ceram. Soc., 79(1996) 461. | 미소장 |
| 22 | W. J. Moberlychan, J. J. Cao and L. C. De Jonghe:Acta Mater., 46 (1998) 1625. | 미소장 |
| 23 | W. J. Moberlychan and L. C. De Jonghe: Acta Mater.,46 (1998) 2471. | 미소장 |
| 24 | D. Chen, M. E. Sixta, X. F. Zhang, L. C. De Jonghe and R. O. Ritchie: Acta Mater., 48 (2000) 4599. | 미소장 |
| 25 | X. F. Zhang, Q. Yang and L. C. De Jonghe: Acta Mater., 51 (2003) 3849. | 미소장 |
| 26 | X. F. Zhang, G. Y. Lee, D. Chen, R. O. Ritchie and L.C. De Jonghe: J. Am. Ceram. Soc., 86 (2003) 1370. | 미소장 |
| 27 | M. Tokita: J. Soc. Powder Technol. Jpn., 30 (1993)790. | 미소장 |
| 28 | N. Tamari, T. Tanaka, K. Tanaka, I. Kondoh, M. Kawahara and M. Tokita: J. Ceram. Soc. Jpn., 103 (1995)740. | 미소장 |
| 29 | T. Nishimura, M. Mitomo, H. Hirotsuru and M.Kawakara: J. Mater. Sci. Lett., 14 (1995) 1046. | 미소장 |
| 30 | D. S. Perera, M. Tokita and S. Moricca: J. Euro.Ceram. Soc., 18 (1998) 401. | 미소장 |
| 31 | Y. Zhou, K. Hirao, M. Toriyama and H. Tanaka: J.Mater. Res., 14 (1999) 3363. | 미소장 |
| 32 | S. W. Wang, L. D. Chen and T. Hirai: J. Mater. Res.,15 (2000) 982. | 미소장 |
| 33 | Y. Zhou, K. Hirao, M. Toriyama and H. Tanaka: J.Am. Ceram. Soc., 83 (2000) 654. | 미소장 |
| 34 | K.-S. Cho, S. Kim, H.-J. Choi, J.-G. Lee and Y.-W.Kim: J. Kor. Ceram. Soc., 38 (2001) 687. | 미소장 |
| 35 | L. Gao, H. Wang, H. Kawaoka, T. Sekino and K. Niihara:J. Euro. Ceram. Soc., 22 (2002) 785. | 미소장 |
| 36 | K.-S. Cho, K.-S. Lee, J.-H. Song, J.-Y. Kim and K.-H.Song: J. Kor. Ceram. Soc., 40 (2003) 751. | 미소장 |
| 37 | W. Chen, U. Anselmi-Tamburini, J. E. Garay, J. R.Graza and Z. A. Munir: Mater. Sci. & Engineer., A394(2005) 132. | 미소장 |
| 38 | U. Anselmi-Tamburini, S. Gennari and Z. A. Munir:Mater. Sci. & Eng., A394 (2005) 139. | 미소장 |
| 39 | K.-S. Cho and K.-S. Lee: Key Eng. Mater., 287 (2005)335. | 미소장 |
| 40 | K.-S. Cho, K.-S. Lee, H.-K. Lee, S. J. Lee and H.-J.Choi: J. Kor. Ceram. Soc., 42 (2005) 567. | 미소장 |
| 41 | K.-S. Cho, Z. A. Munir and H.-K. Lee: J. Ceram. Pro.Res., 9 (2008) 500. | 미소장 |
| 42 | Y.-W. Kim, M. Mitomo and G.-D. Zhan: J. Mater.Res., 14 (1999) 4291. | 미소장 |
| 43 | K. Vanmeensel, A. Laptev, J. Hennicke, J. Vleugels,O. Van der Biest: Acta Mater., 53 (2005) 4379. | 미소장 |
| 44 | Y.-W. Kim, S.-G. Lee and M. Mitomo: J. Euro. Ceram.Soc., 22 (2002) 1031. | 미소장 |
*표시는 필수 입력사항입니다.
| 전화번호 |
|---|
| 기사명 | 저자명 | 페이지 | 원문 | 기사목차 |
|---|
| 번호 | 발행일자 | 권호명 | 제본정보 | 자료실 | 원문 | 신청 페이지 |
|---|
도서위치안내: 정기간행물실(524호) / 서가번호: 국내12
2021년 이전 정기간행물은 온라인 신청(원문 구축 자료는 원문 이용)
우편복사 목록담기를 완료하였습니다.
*표시는 필수 입력사항입니다.
저장 되었습니다.