권호기사보기
| 기사명 | 저자명 | 페이지 | 원문 | 기사목차 |
|---|
결과 내 검색
동의어 포함
나노실리카볼 입자를 합성하고 표면에 비닐기를 부여하는 합성 연구를 통해 다양한 크기로 조절이 된 유-무기하이브
리드 입자인 비닐-나노실리카볼이 합성되었다. 다양한 크기의 비닐-나노실리카볼 입자를 상업적으로 적용되고 있는
아크릴-멜라민 클리어코트에 후첨시키고 경화시켰을 때, 클리어코트의 광택도 증가 및 유지 특성에 대해 연구하였다.
실리카볼 입자가 250 nm 정도인 경우 Matting effect에 의한 광택도 감소가 관측되었으나 20∼30 nm로 작아지면 광택
도 유지 효과가 약 7%까지 증가하였다. 나노실리카볼 대신 상업용 친수 실리카 Aerosil 200 (Hydrophilic fumed silica,
평균입도 12 nm, Degussa)을 사용하여 비닐- fumed 실리카 화합물을 합성하여 클리어코트에 적용하면 광택도 유지
효과가 약 2% 정도만 증가하였다.
Inorganic-organic hybrid material such as vinyl-nano sized silica ball was synthesized by acrylo-alkoxysilane and nano silica
ball with different particle size. And then they were formulated into acrylic-melamine clearcoat. This material is fully characterized
with various analytical methods and applied for strength measurement. The glossy effect, matting effect and anti-
scratching properties of materials were investigated for further growth and maintenance. When the particle size of nano
silica ball is 20∼30 nm, the glossy retain effect was increased by 7% compared to bare acrylic-melamine clearcoat. When
a commercially available silica Aerosil 200 (Hydrophilic fumed silica, average particle size 12 nm, Degussa) react with vinyl
alkoxysilane vinyl-fumed silica complex form. The vinyl-fumed silica along with clearcoat increases only 2% increase at glossy
retain. Nano-scratch test results also support the glossy retain effect of vinyl nano-sized silica ball in clearcoat.*표시는 필수 입력사항입니다.
| 전화번호 |
|---|
| 기사명 | 저자명 | 페이지 | 원문 | 기사목차 |
|---|
| 번호 | 발행일자 | 권호명 | 제본정보 | 자료실 | 원문 | 신청 페이지 |
|---|
도서위치안내: 정기간행물실(524호) / 서가번호: 국내02
2021년 이전 정기간행물은 온라인 신청(원문 구축 자료는 원문 이용)
우편복사 목록담기를 완료하였습니다.
*표시는 필수 입력사항입니다.
저장 되었습니다.