본문 바로가기 주메뉴 바로가기
국회도서관 홈으로 정보검색 소장정보 검색

결과 내 검색

동의어 포함

초록보기

차량 제동시 디스크와 패드사이의 미끄럼 접촉에 의해 발생하는 마찰열은 재질의 열 탄성 변형을 일으키고, 이는 접촉면의 압력 분포에 영향을 끼친다. 이러한 열탄성 불안정성 (Thermo-Elastic Instability,TEI)은 디스크의 고유 진동모드와 결합되어 열섬 현상 및 열간 저더 진동을 발생시킨다. 본 연구에서는 상용 유한 요소 해석 프로그램인 SAMCEF 를 이용하여 자동차용 통풍식 디스크에 대한 3 차원 열간

저더 해석을 수행하였다. Staggered approach 에 의거한 중간 처리기를 이용하여 구조-동역학 해석 결과와 열 전달 해석 결과를 교환하였다. 디스크 표면에 열섬이 발생하는 것을 확인하였고, 이를 디스크 고유진동 모드와 비교함으로써 모드 형상과 열섬 분포의 관계를 분석하였다.

Thermal energy generated because of the friction between the disc and pad is transferred to both sides and causes thermal expansion of the material, which affects the contact pressure distribution. This phenomenon, which is

called thermoelastic instability (TEI), is affected by the natural mode of a disc. TEI results in the formation of a hot spot and causes hot judder vibrations. In this study, three-dimensional analysis of the hot judder of a ventilated disc for

automotives was performed by using the commercial finite element analysis program, SAMCEF. The intermediate processor based on a staggered approach was used to exchange the result data of the mechanical and thermal model. The hot spot was formed on the surface of the disc, and the number of hot spots was compared with the natural mode of the disc.

권호기사

권호기사 목록 테이블로 기사명, 저자명, 페이지, 원문, 기사목차 순으로 되어있습니다.
기사명 저자명 페이지 원문 목차
차체의 유연성을 고려한 고속철도 차량 승차감 해석 신범식, 최연선, 구자춘, 이상원, 이승일 pp.341-346

6축 머니퓰레이터를 이용한 임피던스 제어 기반의 원형 펙 조립 김병상, 김영렬, 송재복, 손승우 pp.347-351

영구자석형 스러스트 베어링의 최적 설계 유승열, 김우연, 김승종, 이욱륜, 배용채, 노명규 pp.353-358

기동형 경계로봇 안정화 시스템의 실험적 검증 김성수, 이동염, 권정주, 박성호 pp.359-365

마찰 스프링을 이용한 주퇴복좌기 설계 연구 김영선, 김성수, 차기업, 노명규 pp.367-374

Mg-Al-Zn 합금의 Paris-Erdogan 법칙에 따른 피로거동 파라미터의 확률론적 특성 최선순 pp.375-381

핫스탬핑용 보론 강판의 열처리 조건에 따른 재질분석 및 점용접 특성 연구 제환일, 손창석, 남기우 pp.383-391

베이지안 접근법을 이용한 스프링 피로 수명 파라미터의 역 추정 허찬영, 안다운, 원준호, 최주호 pp.393-400

마그네슘 합금강의 제2세대 자기연마에서 표면거칠기 예측모델 개발 김상오, 이성호, 곽재섭 pp.401-407

감시 정찰 카메라부를 포함한 짐발 구조 시스템의 진동 특성 해석 이상은, 이태원 pp.409-415

이중냉각 핵연료 상단고정체의 기계적 성능평가 김재용, 윤경호, 김형규, 최우석 pp.417-424

유한 요소법을 이용한 자동차용 디스크 브레이크의 열간 저더 해석 정성필, 박태원, 정원선 pp.425-431

종이컵 성형기용 배럴 캠 설계 프로그램 개발 김욱현, 박태원 pp.433-438

CNG 차량 폭발의 용기 손상 평가에 관한 법공학적 연구 김의수 pp.439-445

1Cr1Mo1/4V 터빈 로터강의 크리프 손상 모델에 관한 연구 최우성, 에릭플러리, 송기욱, 김범신, 장성호 pp.447-452

참고문헌 (17건) : 자료제공( 네이버학술정보 )

참고문헌 목록에 대한 테이블로 번호, 참고문헌, 국회도서관 소장유무로 구성되어 있습니다.
번호 참고문헌 국회도서관 소장유무
1 Analysis of heat conduction in a disk brake system 네이버 미소장
2 Solution of transient thermoelastic contact problems by the fast speed expansion method 네이버 미소장
3 Finite element analysis of frictionally-excited thermoelastic instability in 3D annular disk 네이버 미소장
4 Jang, Y. H. and Ahn, S. H., 207, "Frictionally-Excited Thermoelastic Instability in Functionally Graded Material,” Wear, Vol. 262, pp. 1102~1112. 미소장
5 A Numerical Study of Thermal Performance in Ventilated Disk Brake 소장
6 Thermal Dissipation Performance of the Ventilated Brake Disc having Helical Grooved Vent 소장
7 Structural Design of a Circumferential Friction Disc-brake, Considering Thermoelastic Instability 소장
8 A Study on Thermal Analysis in Ventilated Disk Brake by FEM 소장
9 Brake disc hot spotting and thermal judder: an experimental and finite element study 네이버 미소장
10 Judder vibration in disc brakes excited by thermoelastic instability 네이버 미소장
11 SAMCEF User’s manual, Ver.13.1, 2009. 미소장
12 Numerical analysis method to estimate thermal deformation of a ventilated disc for automotives 소장
13 Yoon, G. H. and Sigmund, O., 2008, "A Monolithic Approach for Topology Optimization of Electrostatically Actuated Devices,” Computer Methods in Applied Mechanics and Engineering, Vol. 197, pp. 4062~4075. 미소장
14 Jung, S. P., 2010, "Numerical Analysis Method of Hot Judder Phenomenon of a Disc Brake System for Automotives,” Ph.D Dissertation, Ajou Univ.. 미소장
15 Geradin, M. and Cardona, A., 2000, Flexible Multibody Dynamics, John Willey & Sons, Chichester, England. 미소장
16 Thermoelastic instability in a seal-like configuration 네이버 미소장
17 Eigenvalue Solution of Thermoelastic Instability Problems Using Fourier Reduction 네이버 미소장