본문 바로가기 주메뉴 바로가기
국회도서관 홈으로 정보검색 소장정보 검색

결과 내 검색

동의어 포함

목차보기

목차

반복하중을 받는 고강도강 기둥을 적용한 WUF-W 접합부의 이력 거동 / 한상환 ; 김종민 ; 문기훈 1

Abstract 1

1. 서론 1

2. WUF-W 접합부 상세 2

3. 시험체 계획 2

4. 인장시험 3

5. WUF-W 접합부의 실험 3

5.1. 시험체의 제작 3

5.2. 실험 계획 및 방법 4

6. 실험 결과 및 평가 5

6.1. 실험 결과 5

6.2. 보 춤의 영향 6

6.3. 소성 회전 분담 6

6.4. 포락선 7

6.5. 소산에너지 7

7. 결론 8

참고문헌 8

초록보기

This study's purpose is to evaluate the seismic performance of Welded Unreinforced Flange-Welded Web connections with the

column composed of high-performance steel. The study involved the inelastic cyclic loading test of 4 full-scale exterior

connection specimens to evaluate the effect of column strength and beam depth. All specimens are designed as strong

column-weak beam and strong panel zone. They are observed at the peak deformation of each cycles with the unaided eye. 3 of

4 specimens including 2 specimens consisted of high-performance steel column are achieved total story drift of 0.04 rad or more

prior to failure. The test results showed that ductility capacity of connections with high-performance steel column is sufficient in

light of current AISC seismic design. Energy dissipation in specimens consisting of high-performance steel column is less than

those of normal strength steel column. Also, K120TG, which is the developed weld metal for 800MPa grade steel, is estimated as

good material in case of welding between normal strength steel and high-performance steel through this study.

권호기사

권호기사 목록 테이블로 기사명, 저자명, 페이지, 원문, 기사목차 순으로 되어있습니다.
기사명 저자명 페이지 원문 목차
이방향 중공슬래브의 최적 중공형성체 형상 도출을 위한 해석적 연구 정주홍 ,최현기 ,이승창 ,최창식 pp.3-10

보기
BIM 기반 Set-based Design 적용 방안에 관한 연구 이승일 ,권남하 ,조영상 pp.11-19

보기
Winkler보에서 온도하중에 대한 Generalized Functions의 응용 곽순섭 ,송길호 pp.21-30

보기
일최대풍속 데이터를 이용한 구조설계용 기본풍속 산정 신성우 ,권구안 ,이종원 pp.31-38

보기
변동풍하중을 받는 고층건물의 시간이력 해석시 입력동하중의 최적간격 장극관 ,윤정환 pp.39-46

보기
오메가형 강판을 삽입한 자중저감형 중공 데크플레이트와 TSC 합성보의 성능평가 김성배 ,박동수 ,서동기 ,이용교 ,이창남 ,김상섭 pp.47-55

보기
반복하중을 받는 고강도강 기둥을 적용한 WUF-W 접합부의 이력 거동 한상환 ,김종민 ,문기훈 pp.57-64

보기
초고층 철골중심가새골조의 내진성능평가 김선웅 pp.65-75

보기
판상형 격간벽 시스템 건물의 반응수정계수 이준호 ,전용 ,김진구 pp.77-84

보기
경사진 건물의 연쇄붕괴 저항성능 정민강 ,박종열 ,김진구 pp.85-92

보기
연성능력향상을 위한 다이아그리드 시스템의 설계요소에 관한 해석적 연구 김기웅 ,박성수 pp.93-100

보기
횡하중을 받는 전단보강된 무량판-기둥 접합부의 구조적 성능에 관한 실험적 연구 윤성기 ,이치형 ,김재봉 ,김용우 pp.101-108

보기
외장 단열 마감 패널재의 실링 접합부 형태에 따른 성능 평가 연구 오상근 ,박진상 ,서현재 ,이혜령 pp.109-116

보기
분광분석을 통한 우레탄샌드위치패널의 난연성능 현장평가방법 연구 조남욱 ,이동호 ,신현준 pp.117-124

보기
전기로 산화슬래그 골재를 활용한 X선 차폐 콘크리트 개발에 관한 실험적 연구 임희섭 ,이한승 ,최재석 pp.125-132

보기
습식탄산화반응을 통한 폐콘크리트 미분말의 CO₂ 고정량 및 CaCO₃ 생성량 추정에 관한 연구 안희성 ,김진섭 ,이한승 pp.133-140

보기
커튼월의 내화 성능평가에 관한 실험적 연구 이재승 ,임현창 ,김형준 ,김흥열 ,조봉호 pp.141-148

보기
上水道 콘크리트 構造物 最適 維持管理를 위한 內部 防水/防蝕材의 附着强度 性能等級 設定에 관한 實驗的 硏究 곽규성 ,서현재 ,미야우치 히로유키 ,김규용 ,오상근 pp.149-158

보기
고온가열에 의한 CFT Stub Column의 역학적 특성평가 김규용 ,이태규 ,김영선 ,민충식 ,강연우 pp.159-166

보기
「건축시공」 분야 국가직무능력표준 개발에 관한 연구 김진실 pp.167-174

보기
건축설계단계 지식기반 마감자재 선정 프로토타입 개발 윤수호 ,박형진 ,구교진 pp.175-183

보기
공동주택 마감공사에서의 하자예방을 위한 중점관리대상 도출 홍석일 ,현창택 ,안수배 ,지성민 ,손명진 pp.185-194

보기
골조공사 공법 대안 선정을 위한 공사기간 및 비용 예측 모델 개발 :RC조 공동주택을 중심으로 곽진열 ,김경래 ,신동우 ,차희성 pp.195-202

보기

참고문헌 (15건) : 자료제공( 네이버학술정보 )

참고문헌 목록에 대한 테이블로 번호, 참고문헌, 국회도서관 소장유무로 구성되어 있습니다.
번호 참고문헌 국회도서관 소장유무
1 AISC (2005a), ANSI/AISC 341-05, Seismic provisions for structural bulding, American Institute of Steel Construction, Inc., Chicago, IL, 2005 미소장
2 AISC (2005b), ANSI/AISC 360-05, Specification for Structural Steel Buildings, American Institute of Steel Construction, Inc., Chicago, IL, 2005 미소장
3 AISC (2009), ANSI/AISC 358-05s1-09, Prequalified Connections for Special and Intermediate Steel Moment Frames for Seismic Applications, 2009 미소장
4 Han.S.W., Kwon.G.U., Moon.K.H., Cyclic behaviour of post-Northridge WUF-B connections, 2006 미소장
5 James M. Ricles, Changshi Mao, Le-Wu Lu, John W. Fisher, Inelastic Cyclic Testing of Welded Unreinforced Moment Connections, 2002 미소장
6 Lee.C.H., Jeon.S.W., Kim.J.H., Uang.C.M., Effects of Panel Zone Strength and Beam Web Connection Method on Seismic Performance of Reduced Beam Section Steel Moment Connections, 2005 미소장
7 Masayoshi Nakashima, Keiichiro Suita, Kiyotaka Morisako, Yoshiomi Maruoka, Test of welded beam-column subassemblies. I: global behavior, 1998 미소장
8 Michel Bruneau, Chia-Ming Uang, Andrew Whittaker, Ductile Design of Steel Structures, 1997 미소장
9 Reoder. C. W., An evaluation of cracking observed in steel moment frames, Proceedings of the 7th U.S.-Japan Workshop on Improvement of Structural Design and Construction Practices, ATC/JSCA, 1996 미소장
10 SAC Joint Venture, Development and Evaluation of Improved Details for Ductile Welded Unreinforced Flange Connections, 2000 미소장
11 SAC Joint Venture., Protocols for fabrication,inspection, testing, and documentation of beam-column connection tests and other experimental specimens, 1997. 미소장
12 An Experimental Study on the Hysteresis Behavior of WUF-B Beam-Column Connection using SN Steel 소장
13 남윤선, 류재용, 최성모, 김상섭, 김종락, HSB 강재를 기둥에 적용한 보-기둥 접합부의 이력거동에 관한 실험적 연구, 한국강구조학회 학술대회 발표집, 2010 미소장
14 한상환, 권건업, WUF-B접합부의 내진성능평가, 대한건축학회논문집, 2003 미소장
15 황성훈, 문기훈, 한상환, 이진영, WUF-W 모멘트 접합부의 비탄성 반복 하중 실험, 대한건축학회논문집, 2010 미소장