본문 바로가기 주메뉴 바로가기
국회도서관 홈으로 정보검색 소장정보 검색

결과 내 검색

동의어 포함

초록보기

본 논문에서는 1차전단변형이론의 횡방향 전단응력과 전단변형률을 개선한 간단한 수정방법을 제시하였다.고차전단변형이론, 층별이론과 같은 기존의 많은 제정된 방법들과 비교해서 본 방법은 매우 간단하게 C0 연속성만이 요구되는 유한요소에 적용할 수 있으며,그 방정식 구성도 매우 간단하다.본 방법의 기본 개념은 고차전단변형이론에 의한 수식으로 부터 두께방향에 따른 횡방향 전단응력과 전단변형률의 분포를 수정하는 것이다.그러므로 1차전단변형이론처럼 전단보정계수는 더 이상 요구되지 않는다.제안한 수식의 타당성을 검증하기 위하여 수치해석을 수행하였으며,본 수정방법에 의한 해는 고차전단변형이론을 고려한 결과와 잘 일치하였다.

In this study, a simplified method of improving not only transverse shear stress but also shear strain based on the first-order shear deformation theory was developed. Unlike many established methods, such as the higher-order shear deformation and layerwise theories, this method can easily apply to finite elements as only continuity is necessary and the formulation of equations is very simple. The basic concept in this method, however, must be corrected:the distribution of the transverse shear stresses and shear strains through the thickness from the formulation based on the higher-order shear deformation theory. Therefore, the shear correction factors are no longer required, based on the first-order shear deformation theory. Numerical analyses were conducted to verify the validity of the proposed formulations. The solutions based on the simplified method were in very good agreement with the results considering the higher-order shear deformation theory.

권호기사

권호기사 목록 테이블로 기사명, 저자명, 페이지, 원문, 기사목차 순으로 되어있습니다.
기사명 저자명 페이지 원문 목차
강구조 특수모멘트골조의 보 소성변형요구량 평가 엄태성 pp.405-415

국부좌굴을 고려한 고강도 조립 H형강 부재의 휨성능 실험 이철호 ,한규홍 ,박창희 ,김진호 ,이승은 ,하태휴 pp.417-428

기하학적 재료적 비선형 특성을 고려한 스트라치 단위부재의 명시적 긴장설치 및 극한하중 해석 이경수 ,한상을 pp.429-438

내부 구속 중공 CFT 기둥의 비선형 해석 한택희 ,원덕희 ,강영종 pp.439-454

대체전단변형률 장을 갖는 8, 9절점 평면 쉘요소를 이용한 곡선 보강 복부판의 좌굴해석 지효선 pp.455-464

마이크로 유전 알고리즘을 이용한 트러스 구조물의 단면 및 형상 최적화 김대환 ,윤병욱 ,이재홍 pp.465-474

복합적층구조해석을 위한 1차전단변형이론의 간단한 수정방안 천경식 ,지효선 pp.475-481

샤르피 충격시험을 통한 구조용강재의 극한지 적용성 검토 이진형 ,신현섭 ,박기태 ,양승현 pp.483-491

인장하중을 받는 중대형급 선설치 앵커볼트의 콘크리트파괴강도 평가를 위한 연구 박용명 ,전명희 ,이건준 ,김철환 pp.493-501

콘크리트채움 U형합성보-H형강기둥 십자형 합성접합부의 내진성능 박창희 ,이철호 ,박홍근 ,황현종 ,이창남 ,김형섭 ,김성배 pp.503-514

400MPa급 건축구조용 열간압연 H형강(SHN400)의 소재 특성 김희동 ,최병정 ,김상섭 ,김철환 ,오영석 pp.515-522

참고문헌 (19건) : 자료제공( 네이버학술정보 )

참고문헌 목록에 대한 테이블로 번호, 참고문헌, 국회도서관 소장유무로 구성되어 있습니다.
번호 참고문헌 국회도서관 소장유무
1 지효선, 천경식, 손병직, 장석윤(2002). 완전 복합신소재 교량상부구조 현장적용 실험연구, 2002년도 대한토목학회 학술발표논문집, 대한토목학회, pp. 139-142. 미소장
2 천경식, 최회권, 장석윤(2003a). 다양한 Serendiptiy유한요소에 따른 복합적층판의 정적, 좌굴 및 자유진동해석 비교연구, 대한토목학회 논문집, 대한토목학회, 제23권, 제5A호, pp. 901-909. 미소장
3 Zigzag Model of Laminated Composite Beams using Trigonometric Functions 소장
4 Refined First-Order Shear Deformation Theory Models for Composite Laminates 네이버 미소장
5 A postprocess method using a displacement field of higher-order shell theory 네이버 미소장
6 Kant, T. and Swaminathan, K. (2000). Analytical solutions using a higher order refined theory of the stability analysis of laminated composite and sandwich plates, Structural Engineering Mechanics, ASCE, Vol. 10, No. 4, pp. 337-357. 미소장
7 Kant, T. and Swaminathan, K. (2001). Analytical solutions for free vibration of laminated composite and sandwich plates based on a higher order refined theory, Composite Structures, Vol. 53, pp. 73-85. 미소장
8 Analytical solutions for free vibration of laminated composite and sandwich plates based on a higher-order refined theory 네이버 미소장
9 Influence of Rotatory Inertia and Shear on Flexural Motions of Isotropic, Elastic Plates 네이버 미소장
10 Noor, A. K., Burton, W. S., and Peters, J. M. (1990). Predictor-correct or procedures for stress and free vibration analyses of multi layered composite plates and shells, Computer Methods of Applied Mechanics, Vol. 82, pp. 341-363. 미소장
11 Pagano, N. J. (1972). Exact solutions for rectangular bi-directional composites and sandwich plates, AIAA Journal, Vol. 10, pp. 931-933. 미소장
12 A new look at shear correction factors and warping functions of anisotropic laminates 네이버 미소장
13 The Effect of Transverse Shear Deformation on the Bending of Elastic Plates 네이버 미소장
14 A Simple Higher-Order Theory for Laminated Composite Plates 네이버 미소장
15 An accurate determination of stresses in thick laminates using a generalized plate theory 네이버 미소장
16 Reddy, J. N. (1997). Mechanics of laminated composite plates, CRC Press, New York. 미소장
17 IMPROVED TRANSVERSE SHEAR STRESSES IN COMPOSITE FINITE ELEMENTS BASED ON FIRST ORDER SHEAR DEFORMATION THEORY 네이버 미소장
18 A refined first-order shear-deformation theory and its justification by plane strain bending problem of laminated plates 네이버 미소장
19 The Effect of Transverse Shear Deformation on the Bending of Laminated Plates 네이버 미소장