본문 바로가기 주메뉴 바로가기
국회도서관 홈으로 정보검색 소장정보 검색

결과 내 검색

동의어 포함

초록보기

Joining of NiO-YSZ to 316 stainless steel was carried out with B-Ni2 brazing alloy (3 wt% Fe, 4.5 wt% Si, 3.2 wt% B, 7 wt% Cr, Ni-balance, m.p. 971-999℃) to seal the NiO-YSZ anode/316 stainless steel interconnect structure in a SOFC. In the present research, interfacial (chemical) reactions during brazing at the NiO-YSZ/ 316 stainless steel interconnect were enhanced by the two processing methods, a) addition of an electroless nickel plate to NiO-YSZ as a coating or b) deposition of titanium layer onto NiO-YSZ by magnetron plasma sputtering method, with process variables and procedures optimized during the pre-processing. Brazing was performed in a cold-wall vacuum furnace at 1080℃. Post-brazing interfacial morphologies between NiO-YSZ and 316 stainless steel were examined by SEM and EDS methods. The results indicate that B-Ni2 brazing filler alloy was fused fully during brazing and continuous interfacial layer formation depended on the method of pre-coating NiO-YSZ. The inter-diffusion of elements was promoted by titanium-deposition: the diffusion reaction thickness of the interfacial area was reduced to less than 5 μm compared to 100 μm for electroless nickel-deposited NiO-YSZ cermet.

권호기사

권호기사 목록 테이블로 기사명, 저자명, 페이지, 원문, 기사목차 순으로 되어있습니다.
기사명 저자명 페이지 원문 목차
Thermoelectric properties of half-Heusler ZrNiSn_1-x_Sb_x_ synthesized by mechanical alloying process and vacuum hot pressing Soon-Chul Ur pp.401-405

분말 표면 조도의 3차원 레이저 분석기를 이용한 정량화와 압분성형체 강도에 미치는 영향 분석 이동준, 윤은유, 김하늘, 강희수, 이언식, 김형섭 pp.406-410

수분사법으로 제조된 순철 분말의 고압비틀림 성형 공정에 의한 치밀화 및 나노결정화 윤은유, 이동준, 김하늘, 강희수, 이언식, 김형섭 pp.411-416

나노다이아몬드가 분산된 엔진오일의 마찰공학 특성 전수형, 엄영랑, 이창규 pp.417-422

스크린 프린팅 공정에 의해 제조된 열전후막모듈의 전기저항에 미치는 금속코팅층의 영향 김경태, 구혜영, 하국현 pp.423-429

Morphologies of brazed NiO-YSZ/316 stainless steel using B-Ni2 brazing filler alloy in a solid oxide fuel cell system Sungkyu Lee, Kyoung-Hoon Kang, Hyun Seon Hong, Sang-Kook Woo pp.430-436

산화물 환원공정에 의해 제조된 Bi₂Te_2.7_Se_0.3_ 분말의 열전특성 박배건, 이길근, 김우열, 하국현 pp.437-442

HDDR 반응시 수소화 반응이 Nd-Fe-B계 분말의 미세조직과 자기적 특성에 미치는 영향 이상협, 유지훈, 김양도 pp.443-448

가스분무공정을 이용한 (AgSbTe₂)_15_(GeTe)_85_ 열전분말의 제조 및 특성평가 김효섭, 이진규, 구자명, 천병선, 홍순직 pp.449-455

Ni-22Cr-18Fe-9Mo계 ODS 합금의 미세조직 및 고온인장 특성 평가 정석환, 강석훈, 한창희, 김태규, 김도향, 장진성 pp.456-462

참고문헌 (12건) : 자료제공( 네이버학술정보 )

참고문헌 목록에 대한 테이블로 번호, 참고문헌, 국회도서관 소장유무로 구성되어 있습니다.
번호 참고문헌 국회도서관 소장유무
1 B. C. H. Steele and A. Heinzel: Nature, 414 (2001) 345. 미소장
2 G. J. K Acres: J. Power Sources, 100 (2001) 60. 미소장
3 Y.-W. Yen, C.-Y. Lee, D.-P. Huang and J.-W. Su: J. Alloy Compd., 466 (2008) 383. 미소장
4 R. Arróyave and T. W. Eagar: Acta Mater., 51 (2003) 4871. 미소장
5 S. Lee, K.-H. Kang, H. S. Hong, Y. Yun, J.-H. Ahn and S. K. Woo: Can. Metall. Q., 50 (2011) 72. 미소장
6 L. Zhang, L. Q. Shi, Z. J. He, B. Zhang, Y. F. Lu, A. Liu and B. Y. Wang: Surf. Coat. Technol., 203 (2009) 3356. 미소장
7 P. Liu, Y. Li, J. Wang and J. Guo: Mater. Res. Bull., 38 (2003) 1493. 미소장
8 C. Xia, Y. Li, U. A. Puchkov, S. A. Gerasimov and J. Wang: Vacuum, 82 (2008) 799. 미소장
9 J. Wang, Y. Li and S. A. Gerasimov: Bull. Mater. Sci., 30 (2007) 415. 미소장
10 X. Wu, R. S. Chandel, S. H. Pheow and H. Li: Mater. Sci. Eng. A, 288 (2000) 84. 미소장
11 G. W. Liu, W. Li, G. J. Qiao, H. J. Wang, J. F. Yang and T. J. Lu: J. Alloy Compd., 470 (2009) 163. 미소장
12 G. W. Liu, G. J. Qiao, H. J. Wang, J. F. Yang and T. J. Lu: J. Eur. Ceram. Soc., 28 (2008) 2701. 미소장