본문 바로가기 주메뉴 바로가기
국회도서관 홈으로 정보검색 소장정보 검색

결과 내 검색

동의어 포함

초록보기

The reticulated carbon foam have been used for their excellent properties in terms of thermal management which is getting important in industrial field currently. In this study, we measure the mechanical properties of the reticulated carbon foam which is heat-treated at various temperature from the prepared low-density phenol foam. Simultaneously, we observe microstructures with high resolution transmission microscope and measure the residual oxygen content of carbon foams to figure out the relationship between the apparent change of properties such as weight loss and linear shrinkage during heat treatment. In conclusion, the carbon foam heat-treated at 1400oC shows the highest strength, and the mechanical behavior is believed to be strongly related to the creation of nano-size graphite crystals from the amorphous carbon during heat treatment. On the other hand, it is turned out that the weight loss occurred at the temperature under 1400oC comes from the elimination of oxygen in the form of CO2 or CO, but no evidence is found on weight loss mechanism at the temperature above 1400oC.

권호기사

권호기사 목록 테이블로 기사명, 저자명, 페이지, 원문, 기사목차 순으로 되어있습니다.
기사명 저자명 페이지 원문 목차
육방정 페라이트의 결정과 Block 구조 신형섭 pp.205-215

납석으로 카올린을 대체한 도자기 소지의 뮬라이트 형성과 특성 곽안나, 김근희, 피재환, 김종영, 조우석, 김경자, 이종근 pp.216-220

고온고압법에 의한 Type II, Type I aB 갈색 다이아몬드의 색향상 송정호, 송오성 pp.221-225

Ceramic diesel particulate filter structure with inclined gas paths Yeon Hwang, Dae-Sik Kang, Hyoung-Gwon Choi, Choong Hoon Lee pp.226-230

Capillary Rheometer를 이용한 숙성시간 및 함수율 변화 도자소지의 가소성평가 김근희, 피재환, 김진호, 김영환, 조우석, 김경자 pp.231-235

망상형 탄소폼의 열처리 온도가 기계적 물성에 미치는 영향 한윤수, 이성민, 김형태 pp.236-240

플라즈마 전해 산화 코팅에 있어서 인산염 전해액과 모재 성분 변화가 Al 산화피막 물성에 미치는 영향. 1, PEO층의 물성 김배연, 김정곤, 이득용, 전민석, 김용남, 김성엽, 김광엽 pp.241-246

플라즈마 전해 산화 코팅에 있어서 인산염 전해액과 모재 성분 변화가 Al 산화피막 물성에 미치는 영향. 2, PEO 층의 결정상 분석 김배연, 김정곤, 이득용, 김용남, 전민석, 김성엽, 김광엽 pp.247-252

(1-x)Pb(Yb_1/2_Nb_1/2_)O₃-xPbTiO₃(0.40 ≤ x ≤ 0.60) 고용계에서의 PbTiO₃치환에 따른 상전이 영역의 상전이 거동과 유전특성 김정현 pp.253-259

Impedance spectroscopy analysis of hydration in ordinary portland cements involving chemical mechanical planarization slurry Jin-Ha Hwang pp.260-265

Bi_1/2_(Na_0.8_K_0.2_)_1/2_TiO₃세라믹스의 유전 및 압전 특성에 대한 Bi(Mg_1/2_Sn_1/2_)O₃변성 효과 팜키남, 딘치힌, 이현영, 공영민, 이재신 pp.266-271

Microwave dielectric properties of MgTiO₃, MgTa₂O₆/polytetrafluoroethylene composite Chang Jun Jeon, Eung Soo Kim pp.272-278

참고문헌 (13건) : 자료제공( 네이버학술정보 )

참고문헌 목록에 대한 테이블로 번호, 참고문헌, 국회도서관 소장유무로 구성되어 있습니다.
번호 참고문헌 국회도서관 소장유무
1 W. Ford, “Method of Making Cellular Refractory Thermal Insulating Material,” U.S. Patent 3,121,050, 1964. 미소장
2 Vitreous carbon — A new form of carbon 네이버 미소장
3 Glass-like carbons 네이버 미소장
4 Conversion of phenol formaldehyde resin to glass-like carbon 네이버 미소장
5 Development of glass-like carbon from phenol formaldehyde resins employing monohydric and dihydric phenols 네이버 미소장
6 J. W. Klett, “Process for Making Carbon Foam,” U.S. Patent 6,033,506, 2000. 미소장
7 Carbon foams for thermal management 네이버 미소장
8 M. Inagaki, T. Morishita, A. Kuno, T. Kito, M. Hirano, T. Suwa, and K. Kusakawa, “Carbon Foams Prepared from Polyimide using Urethane Foam Templete,” Carbon, 42 [3] 497-502 (2004). 미소장
9 Carbon foam derived from various precursors 네이버 미소장
10 Processing of sucrose to low density carbon foams 네이버 미소장
11 K. M. Kearns, “Process for Preparing Pitch Foams,” U. S. Patent 5,868,974, 1999. 미소장
12 J. W. Hager, J. W. Newman, N. Johannes, and F. H. Turrill, “Carbon Artifacts and Compositions and Processes for Their Manufacture,” U.S. Patent 6,013,371, 2000. 미소장
13 The role of structure on the thermal properties of graphitic foams 네이버 미소장