본문 바로가기 주메뉴 바로가기
국회도서관 홈으로 정보검색 소장정보 검색

결과 내 검색

동의어 포함

초록보기

액체로켓 연소기에 사용되는 열차폐코팅(TBC)의 내구성 시험 기술동향을 조사하였다. 표면 접합력 측정을 위한 기계적 시험, 레이저나 가열로, 버너나 플라즈마 등을 이용한 열피로 시험, 분사기를 이용한 소형 연소시험, 열적 기계적 피로시험 등의 많은 내구성 시험들이 있었다. 기에 사용하기 위해 이러한 시편 수준의 시험을 통해 내구성이 확보된 TBC를 결정할 수 있으며, 실제 연소시험을 통해 내구성을 검증할 수 있다.

Durability testing method trends of the thermal barrier coating(TBC) for the combustion chamber of the liquid-propellant rocket engine have been investigated. Many types of the durability testing method such as the mechanical tests to measure surface cohesion force, the thermal fatigue tests with laser, furnace, burner or plasma, the small scale combustion tests using injectors, and the thermo-mechanical fatigue tests were observed. The TBC with sufficient durability can be selected for the use of combustion chamber through such specimen-level tests and the durability can be verified by the tests using the real scale combustion chambers.

권호기사

권호기사 목록 테이블로 기사명, 저자명, 페이지, 원문, 기사목차 순으로 되어있습니다.
기사명 저자명 페이지 원문 목차
우주발사체의 비행자세 3축 정밀제어를 위한 소형 액체로켓엔진의 펄스모드 응답특성 정훈, 김종현, 김정수, 배대석 pp.1-8

Analytical study on the gas-solid suspension flows through sonic and supersonic nozzles JianGuo Sun, G. Rajesh, Heuydong Kim pp.9-17

초음속 노즐 유동의 최적해석을 위한 난류모델의 평가와 선정 감호동, 김정수 pp.18-25

사운딩로켓의 최적 분사조건 결정을 위한 특성방정식 : 해석적 해의 경우 이상현 pp.26-34

터보펌프 터빈의 토크 및 시동특성 연구 정은환, 이항기, 박편구, 홍문근, 김진한 pp.35-41

카나드에 의하여 방향조정 되는 탄의 공력특성에 관한 실험적 연구 박영하, 제상언, 조수용 pp.42-51

Study of the supersonic ejector-diffuser system with a mixing guide vane Fanshi Kong, Yingzi Jin, Heuydong Kim pp.52-60

큰 박리유동을 동반한 초음속 관통형 핀틀노즐 유동에 적합한 2-방정식 난류모델의 압축성계수 보정 영향 허준영, 정준영, 성홍계, 양준서, 이지형 pp.61-69

SIMULINK를 이용한 2-스풀 분리형 배기방식 터보팬 엔진의 구성품 성능맵 생성 및 성능모사에 관한 연구 공창덕, 강명철, 박광림 pp.70-79

SIMULINK와 LabVIEW를 이용한 소형 터보제트 엔진의 실용 통합 상태 진단 시스템 개발 공창덕, 고성희, 박길수, 박광림 pp.80-88

Research on the low-frequency combustion characteristics of an oxygen-rich preburner Insang Moon, Ilyoon Moon, Seong-Up Ha pp.89-96

초고속 비행체용 소모성 터빈엔진 사전연구 김유일, 황기영 pp.97-102

액체로켓엔진 연소기 열차폐코팅 내구성 시험 기술동향 이금오, 유철성, 임병직, 최환석 pp.103-115

참고문헌 (29건) : 자료제공( 네이버학술정보 )

참고문헌 목록에 대한 테이블로 번호, 참고문헌, 국회도서관 소장유무로 구성되어 있습니다.
번호 참고문헌 국회도서관 소장유무
1 Batakis, A. P. and Vogan, J. W., "Rocket Thrust Chamber Thermal Barrier Coatings,"Final Report, NASA CR-175022, 1986 미소장
2 Fracture characteristics of thermal barrier coatings after tensile and bending tests 네이버 미소장
3 The determination of the delamination resistance in thermal barrier coating system by four-point bending tests 네이버 미소장
4 Ma, X.Q., Cho, S. and Takemoto, M., "Acoustic Emission Source Analysis of Plasma Sprayed Thermal Barrier Coatings during Four-point Bend Tests," Surface & Coatings Technology, Vol. 139, Issue 1, 2001, pp.55-62 미소장
5 Guo, S. Q., Mumm, D. R., Karlsson, A. M. and Kagawa, Y., "Measurement of Interfacial Shear Mechanical Properties in Thermal Barrier Coating Systems by a Barb Pullout Method," Scripta Materialia, Vol. 53, No. 9, 2005, pp.1043-1048 미소장
6 Thurn, G., Schneider, G. A., Bahr, H. A. and Aldinger, F., "Toughenss Anisotropy and Damage Behavior of Plasma Sprayed ZrO2 Thermal Barrier Coatings," Surface & Coatings Tech., Vol. 123, Issues 2-3, 2000, pp.147-158 미소장
7 Jian, C. Y., Hashida, T., Tahakashi, H. and Saito, M., "Thermal Shock and Fatigue Resistance Evaluation of Functionally Graded Coating for Gas Turbine Blades by Laser Heating Method," Composition Engineering, Vol. 5, No. 7, 1995, pp.879-889 미소장
8 Thermal fatigue failure induced by delamination in thermal barrier coating 네이버 미소장
9 Zhu, D. and Miller, R. A., "Influence of High Cycle Thermal Loads on Thermal Fatigue Behavior of Thick Thermal Barrier Coatings," NASA Technical Paper 3676, 1997 미소장
10 Zhu, D. and Miller, R. A., "Thermophysical and Thermomechanical Properties of Thermal Barrier Coating Systems," NASA TM-2000-210237, 2000 미소장
11 Zhu, D., Choi, S. R. and Miller, R. A., "Thermal Fatigue and Fracture Behavior of Ceramic Thermal Barrier Coatings," NASA TM-2001-210816, 2001 미소장
12 Zhu, D., Choi, S. R., and Miller, R. A., "Development and Thermal Fatigue Testing of Ceramic Thermal Barrier Coatings," Surface & Coatings Tech., 2004, pp.146-152 미소장
13 Zhu, D. and Miller, R. A., "The Development of Erosion and Impact Resistance Turbine Airfoil Thermal Barrier Coatings," ECI-Thermal and Environmental Barrier Coatings, Irsee, Germany, 2007 미소장
14 Zhu, D. and Miller, R. A., "Advanced Low Conductivity Thermal Barrier Coatings: Performance and Future Directions," 35th International Conf. on Metallurgical Coatings and Thin Films, San Diego, California, 2008 미소장
15 Curren, A. N. and Love, W. K., "Plasma Tests of Sprayed Coatings for Rocket Thrust Chamber," NASA TM X-3072, 1974 미소장
16 Kuczmarski, M. A., Miller, R. A. and Zhu, D., "CFD-guided Development of Test Rigs for Studying Erosion and Large-particle Damage of Thermal Barrier Coatings," Modeling and Simulation in Engg., Hindawi Publishing Corp., ID 837921, 2011 미소장
17 Stepka, F. S., "NASA Thermal Barrier Coatings - Summary and Update," NASA TM 79053, 1978 미소장
18 Hejwowski, T., "Comparative Study of Thermal Barrier Coatings for Internal Combustion Engine," Vacuum, Vol. 85, Issue 5, 2010, pp.610-618 미소장
19 Nguyen, P., "Slurry Sprayed Thermal Barrier Coatings for Aerospace Application," Doctoral Theses, U. of Adelaide, 2010 미소장
20 Quentmeyer, R. J., Kasper, H. J. and Kazaroff, J. M., "Investigation of the Effect of Ceramic Coatings on Rocket Thrust Chamber Life," NASA TM-78892, 1978 미소장
21 Fabrication of TBC-armored rocket combustion chambers by EB-PVD methods and TLP assembling 네이버 미소장
22 Sung, I. K. and Anderson, W., "Test and Evaluation of Rocket Combustor Life Prediction Methodologies," European Conference for Aerospace Sciences (EUCASS), July 4-7, 2005, Moscow, RUSSIA. 미소장
23 Comparison of thermal shock behaviors between plasma-sprayed nanostructured and conventional zirconia thermal barrier coatings 네이버 미소장
24 Wright, P. K., "Influence of cyclic strain on life of a PVD TBC," Mat. Sci. and Engg., A245, Vol. 245, No. 2, 1998, pp.191-200 미소장
25 Baufeld, B., Tziman, E., Mullejans, H., Peteves, S., Bressers, J. and Stamm, W., "Thermal-mechanical fatigue of MAR-M 509 with a thermal barrier coating," Mat. Sci. and Engg. A315, Vol. 315, No. 1-2, 2001, pp.231-239 미소장
26 액체로켓엔진 연소기에 적용된 니켈-크롬 코팅의 열차폐 효율과 내구성 소장
27 Crack Initiation and Propagation at the Gas Turbine Blade with Antioxidation and Thermal Barrier Coating 소장
28 Evaluation of Bond Strength of Isothermally Aged Plasma Sprayed Thermal Barrier Coating 소장
29 Evaluation on the Delamination Life of Isothermally Aged Plasma Sprayed Thermal Barrier Coating 소장