본문 바로가기 주메뉴 바로가기
국회도서관 홈으로 정보검색 소장정보 검색

결과 내 검색

동의어 포함

초록보기

It was investigated that the effects of hydrogen charging on the properties of 590 MPa Dual Phase(DP) steels at the surface layers. The hydrogen-charging time was changed from 5 to 50 hours and current densities from 100, 150, and 200 mA/cm2, respectively. It was found that the hydrogen content in the specimen was increased with as the charging time and the current density. The microvickers hardness of the subsurface zone was increased from 215.3 HV to 239.5 HV due to the increase in current density and charging time. The comparison of the absorbed energies tested by a small-punch (SP) test showed that the absorbed energy of the specimen was greatly reduced from 436 to 283 kgf-mm2 because of hydrogen embrittlement. It was confirmed that bulb aspects of fracture surface became more brittle with increasing hydrogen content.

권호기사

권호기사 목록 테이블로 기사명, 저자명, 페이지, 원문, 기사목차 순으로 되어있습니다.
기사명 저자명 페이지 원문 목차
해수 내 캐비테이션 환경에서 동합금의 정전위법에 의한 손상 방지 기술 김성종, 박재철, 장석기 pp.120-125

접착 필름과 평판 유리를 이용하여 봉지된 유기 발광 소자의 발광 특성 임수용, 양재웅, 주성후 pp.111-115

Influence of Annealing Temperatures on Corrosion Resistance of Magnesium Thin Film-Coated Electrogalvanized Steel 이명훈, 이승효, 정재인, 곽영진, 김태엽, 김연원 pp.116-119

화학적 용액성장법에 의한 ZnS 박막의 제조 시 ammonia 및 Na2EDTA의 영향 김관태, 이해기, 박병옥 pp.105-110

금속 패터닝과 Blank노광을 이용한 감광성 유리의 미세가공 조재승, 강형범, 윤혜진, 김효진, 임현우, 조시형, 임실묵 pp.99-104

유도결합 플라즈마 시스템의 수치 모델링에서 가스 분배 특성 해석 주정훈 pp.133-138

수소장입시킨 590 MPa DP강의 표면층 물성변화에 관한 수소의 영향 최종운, 박재우, 강계명 pp.126-132

참고문헌 (16건) : 자료제공( 네이버학술정보 )

참고문헌 목록에 대한 테이블로 번호, 참고문헌, 국회도서관 소장유무로 구성되어 있습니다.
번호 참고문헌 국회도서관 소장유무
1 R. Kot, J. W. Morris, TMS/AIME, (1979) 362. 미소장
2 R. G. Davies, C. L. Magee, J. Met., 31 (1979) 17. 미소장
3 G. Katano, K. Ueyama, M. Mori, J. Mater. Sci., 36 (2001) 2277. 미소장
4 J. P. Hirth, Metall. Trans., 11A, (1980) 861. 미소장
5 R. G. Davies, Metall. Trans., 12A, (1981) 1668. 미소장
6 W. Y. Choo, J. Y. Lee, Metall. Trans., 13A, (1982) 135. 미소장
7 A. R. Troiano, ASM Trans., 52 (1960), 54. 미소장
8 J. U. Choi, J. W. Park, K. M. Kang, Kor. J. Mater. Res., 21 (2011) 581. 미소장
9 J. W. Park, K. M. Kang, Kor. J. Mater. Res., 22 (2012) 29. 미소장
10 K. M. Kang, J. W. Park, J. U. Choi, J. Kor. Inst. Surf. Eng., 26 (2013) 48. 미소장
11 H. Matsui, H. Kimura, Mater. Sci. Eng. 40 (1979) 227. 미소장
12 Standard Test Method for Ball Punch Deformation of Metallic Sheet Material, ASTM E643-84 (2000). 미소장
13 M. Wang, E. Akiyama, K. Tsuzaki, Corros. Sci. 49 (2007) 4081. 미소장
14 C. C. Lee, J. W. Park, K. M. Kang, Kor. Inst. Surf. Eng., 45 (2012) 128. 미소장
15 T. Zhang, W. Y. Chu, K. W. Gao, L. J. Qiao, Mater. Sci. Eng., A347 (2003) 291. 미소장
16 Y. Z. Liu, X. T. Zu, C. Li, S. Y. Qiu, W. J. Li, X. Q. Huang, Scripta Mater., 52 (2005) 821. 미소장