권호기사보기
| 기사명 | 저자명 | 페이지 | 원문 | 기사목차 |
|---|
결과 내 검색
동의어 포함
Vacuum kinetic spray(VKS) is a relatively advanced process for fabricating thin/thick and dense ceramic coatingsvia submicron-sized particle impact at room temperature. However, unfortunately, the particle velocity, which is an importantvalue for investigating the deposition mechanism, has not been clarified yet. Thus, in this research, VKS average particlevelocities were derived by numerical analysis method(CFD: computational fluid dynamics) connected with an experimentalapproach(SCM: slit cell method). When the process gas or powder particles are accelerated by a compressive force generatedby gas pressure in kinetic spraying, a tensile force generated by the vacuum in the VKS system accelerates the process gas.
As a result, the gas is able to reach supersonic speed even though only 0.6MPa gas pressure is used in VKS. In addition, smallsize powders can be accelerated up to supersonic velocity by means of the drag-force of the low pressure process gas flow.
Furthermore, in this process, the increase of gas flow makes the drag-force stronger and gas distribution more homogenizedin the pipe, by which the total particle average velocity becomes higher and the difference between max. and min. particlevelocity decreases. Consequently, the control of particle size and gas flow rate are important factors in making the velocity ofparticles high enough for successful deposition in the VKS system.| 기사명 | 저자명 | 페이지 | 원문 | 목차 |
|---|---|---|---|---|
| Effect of Milling Time on Pore Size and Distribution of Ti-Nb-Zr Biomaterials with Space Holder Consolidated by Spark Plasma Sintering | Kee-Do Woo, Dong-Gun Kim, Dong-Soo Kang, Tack Lee | pp.111-115 |
|
|
| BSCCO 플라즈마 용사피막의 부분용융열처리 후 어닐링 시간에 따른 초전도 특성 | 박경채, 박정식, 이선홍 | pp.116-122 |
|
|
| Notched Ring Test 저속균열 시험편의 응력확대계수정식화 | 최선웅, 표수호 | pp.87-92 |
|
|
| Ink-jet 프린팅용 CoAl2O4 고화도 나노 무기 잉크 제조 및 프린팅 특성평가 | 한규성, 이기찬, 윤종원, 김진호, 황광택 | pp.73-80 |
|
|
| CaO-SiO2-Al2O3-MgO-CaF2 슬래그의 질소용해도에 관한 연구 | 백승배, 임종호, 정우진, 이승원 | pp.81-86 |
|
|
| DC, pulse 조건에 따른 구리 도금층 미세 조직 관찰 | 김양도, 윤지숙, 박찬수, 홍순현, 이현주, 이승준 | pp.105-110 |
|
|
| 고주파 유도 가열에 의한 나노구조 Mg4Al2Ti9O25 합성 및 소결과 기계적 성질 | 손인진, 도정만, 윤진국, 강현수 | pp.67-72 |
|
|
| 진공상온분사(VKS) 공정에서의 비행입자 가속 기구 및 속도제어를 위한 가스 유량 효과에 관한 연구 | 이창희, 박형권, 권주혁, 이일주 | pp.98-104 |
|
|
| 황산코발트 용액에 의한 다양한 세라믹소지의 반응 | 김경남, 원일안 | pp.93-97 |
|
| 번호 | 참고문헌 | 국회도서관 소장유무 |
|---|---|---|
| 1 | J. Akedo, J. Therm. Spray Technol., 17(2), 181 (2008). | 미소장 |
| 2 | B. D. Hahn, Y. L. Cho, D. S. Park, J. J. Choi, J. H. Ryu, J. W. Kim, C. W. Ahn, C. Park, H. E. Kim and S. G. Kim, J. Biomater. Appl., 27(5), 587 (2013). | 미소장 |
| 3 | J. J. Choi, D. S. Park, B. G. Seong and H. Y. Bae, Int. J. Hydrogen Energy, 37, 9809 (2012). | 미소장 |
| 4 | J. H. Ryu, B. D. Hahn, J. J. Choi, W. H. Yoon, B. K. Lee, J. H. Choi and D. S. Park, J. Am. Ceram. Soc., 93(1), 55(2010). | 미소장 |
| 5 | O. Y. Kwon, H. J. Na, H. J. Kim, D. W. Lee and S. M. Nam, Nanoscale Res. Lett., 7, 261 (2012). | 미소장 |
| 6 | J. Akedo, J. Am. Ceram. Soc., 89(6), 1834 (2006). | 미소장 |
| 7 | D. M. Chun and S. H. Ahn, Acta Mater., 59, 2693 (2011). | 미소장 |
| 8 | F. Cao, H. K. Park, G. Y. Bae, J. A. Heo and C. H. Lee, J. Am. Ceram. Soc., 96(1), 40 (2013). | 미소장 |
| 9 | H. K. Park, J. A. Heo, F. Cao, J. H. kwon, K. C. Kang, G. Y. Bae and C. H. Lee, J. Therm. Spray Technol., 22(6), 882 (2013). | 미소장 |
| 10 | F. Cao, H. K. Park, J. A. Heo, J. H. Kwon and C. H. Lee, J. Therm. Spray Technol. 22(7), 1109 (2013). | 미소장 |
| 11 | A. Iwata and J. Akedo, J. Cryst. Growth, 275, e1269(2005). | 미소장 |
| 12 | D. W. Lee, H. J. Kim and S. M. Nam, J. Korean Phys. Soc., 57(4), 1115 (2010). | 미소장 |
| 13 | D. W. Lee and S. M. Nam, J. Ceram. Process Res., 11(1), 100 (2010). | 미소장 |
| 14 | D. W. Lee, H. J. Kim, Y. H. Kim, Y. H. Yun and S. M. Nam, J. Am. Ceram. Soc., 94(9), 3131 (2011). | 미소장 |
| 15 | C. W. Kim, J. H. Choi, H. J. Kim, D. W. Lee, C. Y. Hyun and S. M. Nam, Ceram. Int., 38, 5621 (2012). | 미소장 |
| 16 | H. Assadi, F. Gärtner, T. Stoltenhoff and H. Kreye, Acta Mater., 51, 4379 (2003). | 미소장 |
| 17 | T. Schmidt, F. Gärtner, H. Assadi and H. Kreye, Acta Mater., 54, 729 (2006). | 미소장 |
| 18 | G. Y. Bae, Y. Xiong, S. Kumar, K. C. Kang and C. H. Lee, Acta Mater., 56, 4858 (2008). | 미소장 |
| 19 | M. Lebedev, J. Akedo, K. Mori and T. Eiju, J. Vac. Sci. Technol. A, 18(2), 563 (2000). | 미소장 |
| 20 | H. Katanoda and K. Matsuo, Mater. Trans., 47(7), 1620(2006). | 미소장 |
| 21 | M. W. Lee, J. J. Park, D. Y. Kim, S. S. Yoon, H. Y. Kim, D. H. Kim, S. C. James, S. Chandra, T. Coyle, J. H. Ryu, W. H. Yoon and D. S. Park, J. Aerosol Sci., 42, 771(2011). | 미소장 |
| 22 | D. M. Chun, J. O. Choi, C. S. Lee and S. H. Ahn, Surf. Coat. Technol., 206, 2125 (2012). | 미소장 |
| 23 | Ansys Fluent User’s Guide, Release 14.0, ANSYS, Inc., November 2011 (2011). | 미소장 |
| 24 | W. Y. Li, H. Liao, H. T. Wang, C. J. Li, G. Zhang and C. Coddet, Appl. Surf. Sci., 253, 708 (2006). | 미소장 |
| 25 | K. Naoe, M. Nishiki and A. Yumoto, J. Therm. Spray Technol., 22(8), 1267 (2013). | 미소장 |
*표시는 필수 입력사항입니다.
| 전화번호 |
|---|
| 기사명 | 저자명 | 페이지 | 원문 | 기사목차 |
|---|
| 번호 | 발행일자 | 권호명 | 제본정보 | 자료실 | 원문 | 신청 페이지 |
|---|
도서위치안내: 정기간행물실(524호) / 서가번호: 국내13
2021년 이전 정기간행물은 온라인 신청(원문 구축 자료는 원문 이용)
우편복사 목록담기를 완료하였습니다.
*표시는 필수 입력사항입니다.
저장 되었습니다.