권호기사보기
| 기사명 | 저자명 | 페이지 | 원문 | 기사목차 |
|---|
결과 내 검색
동의어 포함
| 기사명 | 저자명 | 페이지 | 원문 | 목차 |
|---|---|---|---|---|
| 항공기용 가스터빈 엔진의 고압터빈에서 열유동 특성해석을 위한 전산해석기법 연구 | 김진욱, 박정규, 강영석, 조이상, 조진수 | pp.46-51 |
|
|
| 부유식 수처리시스템용 축류펌프의 성능 및 내부유동 | 패트릭마크싱, 최영도 | pp.52-58 |
|
|
| 원심압축기 임펠러의 형상 설계 최적화에 관한 수치적 연구 | 서정민, 박준영, 최범석 | pp.5-12 |
|
|
| 터보펌프용 전진익형 인듀서 흡입성능 유동해석 | 최창호, 노준구, 김진한 | pp.13-18 |
|
|
| 다공판이 설치된 버터플라이밸브의 캐비테이션 발생 저감에 관한 수치적 연구 | 조성휘, 김홍집, 송근원 | pp.65-70 |
|
|
| 500W급 마이크로 가스터빈 발전기 회전체-베어링부의 단열 및 냉각 성능에 대한 실험적 연구 | 박철훈, 최상규, 함상용 | pp.19-24 |
|
|
| 마이크로 프로펠러 수차의 성능 특성 | 김병곤 | pp.25-32 |
|
|
| 수직관 내 순수 증기의 층류 액막 응축 모델 | 김동억 | pp.33-40 |
|
|
| 생물학적 호기성필터를 이용한 소규모 하수처리시스템에 관한 연구 | 박찬규, 조은영, 김영희, 박성진 | pp.41-45 |
|
|
| 이중분사 홀의 면적비와 분사각 변화에 따른 가스터빈 막냉각 특성 연구 | 조문영, 이종철, 김윤제 | pp.59-64 |
|
| 번호 | 참고문헌 | 국회도서관 소장유무 |
|---|---|---|
| 1 | Peirs, J., Waumans, T., Liu, K., Ferraris, E., Verstraete, T., Van den Braembussche, R., and Reynaerts, D., 2009, “Experimental verification of compressor performance for an ultra-microgasturbine,” Proc. the 9th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, pp. 92∼95. | 미소장 |
| 2 | Han, S. J., Seo, J. M, Park, J. Y. Choi, B. S. and Do, K. H., 2010, “Design and simulation of 500W ultra-micro gas turbine generator”, Proc. PowerMEMS, Leuven, pp. 247∼250. | 미소장 |
| 3 | Park, C. H., Choi, S. K. and Ham, S. Y., 2011, “Design and experiment of 400,000 rpm high speed rotor and bearings for 500W class micro gas turbine generator,”Proc. PowerMEMS, Daejeon, pp. 1∼4. | 미소장 |
| 4 | Performance Evaluation of Compressor to Develop 500W Class Ultra-Micro Gas Turbine | 소장 |
| 5 | Seo, J. M., Park, J. Y. and Choi, B. S., 2013, “Start-up and Self-sustain test of 500W ultra-micro gas turbine generator,” Proc. PowerMEMS, London, pp. 1∼5. | 미소장 |
| 6 | Park, C. H,. Choi, S. K., Hong, D. E., Yoon, T. G. and Lee, S. H., 2013 “Identification of dynamic coefficients of metal mesh damper foil bearings for 400,000 rpm class high speed rotor,” Proc. 11th international symposium of measurement technology and intelligent instruments, Achen, pp. 1∼2. | 미소장 |
| 7 | Note: Radial-thrust combo metal mesh foil bearing for microturbomachinery. ![]() |
미소장 |
| 8 | San Andrés, L., Chirathadam, T. A., and Kim, T. H., 2010, “Measurement of structural stiffness and damping coefficients in a metal mesh foil bearing.” Journal of Engineering for Gas Turbines and Power, Vol. 132, No.3, pp. 032503. | 미소장 |
| 9 | San Andrés, L., and Chirathadam, T. A., 2011, “Identification of Rotordynamic Force Coefficients of a Metal Mesh Foil Bearing Using Impact Load Excitations,” Journal of Engineering for Gas Turbines and Power, Vol. 133, No. 11, pp. 112501. | 미소장 |
| 10 | San Andrés, L., and Chirathadam, T. A., 2011, “Metal mesh foil bearing: Effect of motion amplitude, rotor speed, static load, and excitation frequency on force coefficients,” Journal of Engineering for Gas Turbines and Power, Vol. 133, No. 12, pp. 122503. | 미소장 |
| 11 | Lee, Y. B., Kim, T. Y., Kim, C. H., and Kim, T. H., 2012, “Effects of Mesh Density on Static Load Performance of Metal Mesh Gas Foil Bearings,”Journal of Engineering for Gas Turbines and Power, pp. 134, No. 1, pp. 012502. | 미소장 |
| 12 | Effect of the thermal insulation on generator and micro gas turbine system ![]() |
미소장 |
*표시는 필수 입력사항입니다.
| 전화번호 |
|---|
| 기사명 | 저자명 | 페이지 | 원문 | 기사목차 |
|---|
| 번호 | 발행일자 | 권호명 | 제본정보 | 자료실 | 원문 | 신청 페이지 |
|---|
도서위치안내: 정기간행물실(524호) / 서가번호: 국내13
2021년 이전 정기간행물은 온라인 신청(원문 구축 자료는 원문 이용)
우편복사 목록담기를 완료하였습니다.
*표시는 필수 입력사항입니다.
저장 되었습니다.