권호기사보기
| 기사명 | 저자명 | 페이지 | 원문 | 기사목차 |
|---|
결과 내 검색
동의어 포함
| 기사명 | 저자명 | 페이지 | 원문 | 목차 |
|---|---|---|---|---|
| 컵버너시험에서 소화기준에 따른 불활성기체의 소화농도에 대한 정량적 차이 | 조재호, 황철홍 | pp.34-42 | ||
| 응급환자 이송 서비스의 이용 특성과 예측 인자 : 한국의료패널 2009년 데이터를 중심으로 | 강경희 | pp.80-86 | ||
| 축소 모의된 구획 화재의 흘림 실험에 대한 인화성 액체의 화재 패턴 해석 | 조희수, 최충석 | pp.43-48 | ||
| 해석적 방법에 의한 고강도 강재(SM 570) 적용 보부재의 고온 시 내력 평가 | 권인규 | pp.49-54 | ||
| 대규모 클린룸 화재의 시뮬레이션 | 박외철 | pp.29-33 | ||
| 고층건축물의 피난기구 도입 필요성에 관한 연구 : 승강식피난기를 중심으로 | 최규출, 나판주, 설영미 | pp.10-19 | ||
| 화재진압 교육훈련시설 설치기준의 필요성 및 내용에 관한 연구 | 송우승, 함승희, 윤명오 | pp.62-71 | ||
| 3단 스피드 선풍기 모터의 정상 및 고정 운전에 대한 전압, 전류 및 온도 신호 분석 | 김윤복, 김두현 | pp.87-91 | ||
| 최적화 기법을 이용한 이산화탄소 소화설비의 설계프로그램 개발에 관한 연구 | 이동명 | pp.1-9 | ||
| 대향류 메탄/공기 확산화염에서 복사모델이 소화한계에 미치는 영향 | 문선여, 조재호, 황철홍, 오창보, 박원희 | pp.20-28 | ||
| 119구급대 주들것의 문제점과 그 개선방안에 관한 연구 | 함승희, 송우승, 윤명오 | pp.72-79 | ||
| 메틸렌피페라지노메틸-비스-포스폰산 금속염으로 처리된 목재 시험편의 연소특성 | 진의, 정영진 | pp.55-61 |
| 번호 | 참고문헌 | 국회도서관 소장유무 |
|---|---|---|
| 1 | Anon, “Standard on Clean Agent Fire Extinguishing Systems”, National Fire Protection Association, NFPA 2001, Quincy, MA (2000). | 미소장 |
| 2 | Anon, “Gaseous Fire Extinguishing Systems - Physical Properties and System Design”, International Organization for Standardization, ISO 14520-Part I (2000). | 미소장 |
| 3 | The effect of reduced pressure and airflow on liquid surface diffusion flames ![]() |
미소장 |
| 4 | Measurement of flame-extinguishing concentrations ![]() |
미소장 |
| 5 | S. Preece, P. Mackay and A. Chattaway, “The Cup Burner Method - A Parametric Analysis of the Factors Influencing the Reported Extinguishing Concentrations of Inert Gases”, Halon Options Technical Working Conference, Albuquerque, NM (2003). | 미소장 |
| 6 | Scale Effect of Cup Burner on Flame-Extinguishing Concentrations ![]() |
미소장 |
| 7 | M. L. Robin and T. F. Rowland, “Development of a Standard Cup-burner Aparatus: NFPA and ISO Standard Methods”, Halon Options Technical Working Conference, Albuquerque, NM (1999). | 미소장 |
| 8 | J. A. Senecal, “Revised NFPA Cup-burner Test Method:Improving Reproducibility”, Halon Options Technical Working Conference, Albuquerque, NM (2006). | 미소장 |
| 9 | Fire-suppression characteristics of CF 3H in a cup burner ![]() |
미소장 |
| 10 | J. A. Senecal, “Flame Extinguishing in the Cup-Burner by Inert Gases”, Fire Safety Journal, Vol. 40, pp. 579-591 (2005). | 미소장 |
| 11 | Flame-extinguishing concentrations and peak concentrations of N 2, Ar, CO 2 and their mixtures for hydrocarbon fuels ![]() |
미소장 |
| 12 | F. Takahashi, G. T. Linteris and V. R. Katta, “Suppression of Cup-Burner Flames,” 4th International Symposium on Scale Modeling (ISSM-IV), Cleveland, OH (2003). | 미소장 |
| 13 | F. Takahashi, G. T. Linteris and V. R. Katta, “Physical and Chemical Aspects of Cup-burner Flame Extinguishment”, Proceedings of the 13th Annual Halon Options Technical Working Conference, Albuquerque, NM (2005). | 미소장 |
| 14 | Extinguishment mechanisms of coflow diffusion flames in a cup-burner apparatus ![]() |
미소장 |
| 15 | W. M. Pitts, J. C. Yang, R. A. Rryant, L. G. Blevins and M. L. Huber, “Characteristics and Identification of Super-Effective Thermal Fire-Extinguishing Agents”, NIST Technical Note 1440, Gaithersburg, MD (2006). | 미소장 |
| 16 | Soot particle measurements in diffusion flames ![]() |
미소장 |
| 17 | T. H. Jeong and E. J. Lee, “Flame Instability Pool Fires Near Extinction”, The Korean Society of Mechanical Engineers, Vol. 36, No. 12, pp. 1193-1199 (2012). | 미소장 |
| 18 | On the characteristics of laminar lifted flames in a nonpremixed jet ![]() |
미소장 |
| 19 | J. C. Ferreira, “Flamelet Modeling of Stabilization in Turbulent Non-Premixed Combustion”, Ph.D. Dissertation, University of Stuttgart (1996). | 미소장 |
| 20 | Effects of Fuel Nozzle Diameter in the Behavior of Laminar Lifted Flame | 소장 |
| 21 | Schmidt number effects on laminar jet diffusion flame liftoff ![]() |
미소장 |
*표시는 필수 입력사항입니다.
| 전화번호 |
|---|
| 기사명 | 저자명 | 페이지 | 원문 | 기사목차 |
|---|
| 번호 | 발행일자 | 권호명 | 제본정보 | 자료실 | 원문 | 신청 페이지 |
|---|
도서위치안내: 정기간행물실(524호) / 서가번호: 국내14
2021년 이전 정기간행물은 온라인 신청(원문 구축 자료는 원문 이용)
우편복사 목록담기를 완료하였습니다.
*표시는 필수 입력사항입니다.
저장 되었습니다.